V4 second bugfixes

README.md

@@ -235,10 +235,9 @@ Those package repositories are pre-installed in Geodesic, so
 all you need to do is add the packages you want via
 
 ```Dockerfile
-RUN apt-get update && apt-get install -y` commands in your Dockerfile.
+RUN apt-get update && apt-get install -y <package-name>...
 ```
-
-The package manager will automatically select the correct architecture for the package.
+commands in your Dockerfile. The package manager will automatically select the correct architecture for the package.
 
 #### Pinning package versions in Debian
 

README.yaml

@@ -236,10 +236,9 @@ usage: |-
   all you need to do is add the packages you want via
 
   ```Dockerfile
-  RUN apt-get update && apt-get install -y` commands in your Dockerfile.
+  RUN apt-get update && apt-get install -y <package-name>...
   ```
-
-  The package manager will automatically select the correct architecture for the package.
+  commands in your Dockerfile. The package manager will automatically select the correct architecture for the package.
 
   #### Pinning package versions in Debian
 

os/alpine/requirements.txt → os/alpine/requirements-Alpine-disabled.txt

@@ -1,4 +1,4 @@
-cryptography==43.0.1
+cryptography==44.0.1
 PyYAML==6.0.1
 awscli==1.33.10
 boto3==1.34.128

os/debian/Dockerfile.debian

@@ -95,7 +95,7 @@ ENV XDG_CACHE_HOME=/var/cache/xdg_cache_home
 RUN for dir in $XDG_DATA_HOME $XDG_CONFIG_HOME $XDG_CACHE_HOME; do \
 	mkdir -p $dir; chmod 777 $dir; done
 
-ENV BANNER "geodesic"
+ENV BANNER="geodesic"
 
 # Install all packages as root
 USER root

rootfs/etc/profile.d/_07-term-mode.sh

@@ -75,28 +75,38 @@ function _is_term_dark_mode() {
 		saved_state=$(stty -g)
 		trap 'stty "$saved_state"' EXIT
 		_terminal_trace 'Checking terminal color scheme...'
-		stty -echo
-		echo -ne '\e]10;?\a\e]11;?\a' >/dev/tty
 		# Timeout of 2 was not enough when waking for sleep.
-		# The second read should be part of the first response, should not need much time at all regardless.
 		# When in a signal handler, we might be waking from sleep or hibernation, so we give it a lot more time.
-		timeout_duration=$([[ ${GEODESIC_TERM_COLOR_SIGNAL} == "true" ]] && echo 30 || echo 1)
+		timeout_duration="0.6"
+		stty -echo
+		# Query the terminal for the foreground color. Use printf to ensure the string is output as a single block,
+		# without interference from other processes writing to the terminal.
+		printf '\e]10;?\a' >/dev/tty
 		IFS=: read -rs -t "$timeout_duration" -d $'\a' x fg_rgb </dev/tty
 		exit_code=$?
-		[[ $exit_code -gt 128 ]] || [[ -z $fg_rgb ]] && [[ ${GEODESIC_TERM_COLOR_SIGNAL} == "true" ]] && export GEODESIC_TERM_COLOR_AUTO=disabled
+		[[ $exit_code -gt 128 ]] || [[ -z $fg_rgb ]] && [[ ${GEODESIC_TERM_COLOR_UPDATING} == "true" ]] && export GEODESIC_TERM_COLOR_AUTO=disabled
 		[[ $exit_code -gt 128 ]] || exit_code=0
-		IFS=: read -rs -t 0.5 -d $'\a' x bg_rgb </dev/tty
-		((exit_code += $?))
+		if [[ $exit_code -eq 0 ]] && [[ -n $fg_rgb ]]; then
+			# Query the terminal for the background color
+			printf '\e]11;?\a' >/dev/tty
+			IFS=: read -rs -t "$timeout_duration" -d $'\a' x bg_rgb </dev/tty
+			exit_code=$?
+			[[ $exit_code -gt 128 ]] || [[ -z $bg_rgb ]] && [[ ${GEODESIC_TERM_COLOR_UPDATING} == "true" ]] && export GEODESIC_TERM_COLOR_AUTO=disabled
+		fi
 		stty "$saved_state"
 		trap - EXIT
 	else
 		_terminal_trace "${FUNCNAME[0]} called, but not running in a color terminal."
 	fi
 
-	if [[ ${GEODESIC_TERM_COLOR_SIGNAL} == "true" ]] && [[ ${GEODESIC_TERM_COLOR_AUTO} == "disabled" ]]; then
-		printf "\n\n\tTerminal light/dark mode detection failed from signal handler. Disabling automatic detection.\n" >&2
+	if [[ ${GEODESIC_TERM_COLOR_UPDATING} == "true" ]] && [[ ${GEODESIC_TERM_COLOR_AUTO} == "disabled" ]]; then
+		printf "\n\n################# Begin Message from Geodesic ################\n\n" >&2
+		printf "\tTerminal automatic light/dark mode detection failed from shell prompt hook. Disabling automatic detection.\n" >&2
 		printf "\tYou can manually change modes with\n\n\tupdate-terminal-color-mode [dark|light]\n\n" >&2
 		printf "\tYou can re-enable automatic detection with\n\n\tunset GEODESIC_TERM_COLOR_AUTO\n\n" >&2
+		printf "################# End Message from Geodesic ##################\n\n" >&2
+		echo "auto-detect-failed"
+		return 9
 	fi
 
 	if [[ $exit_code -gt 128 ]] || [[ -z $fg_rgb ]] || [[ -z $bg_rgb ]]; then

rootfs/etc/profile.d/_10-colors.sh

@@ -31,7 +31,15 @@ function update-terminal-color-mode() {
 		;;
 	esac
 
-	if [[ $new_mode == "unknown" ]]; then
+	if [[ "$new_mode" == "auto-detect-failed" ]]; then
+		if [[ "$quiet" == "true" ]]; then
+			return 9
+		else
+			new_mode="unknown"
+		fi
+	fi
+
+	if [[ "$new_mode" == "unknown" ]]; then
 		if ! tty -s; then
 			[[ "$quiet" == "true" ]] || echo "No terminal detected." >&2
 		elif [[ -z "$(tput op 2>/dev/null)" ]]; then
@@ -138,11 +146,13 @@ function _geodesic_tput_cache_init() {
 		;;
 	esac
 
+	# Treat any failure of color detection as historical default "light" mode
 	if [[ $new_mode == "dark" ]]; then
 		_geodesic_tput_cache[black]=$(tput setaf 7)              # swap black and white
 		_geodesic_tput_cache[white]=$(tput setaf 0)              # 0 is ANSI black, 7 is ANSI white
 		_geodesic_tput_cache[blue]=${_geodesic_tput_cache[cyan]} # blue is too dark, use cyan instead
 	else
+		new_mode="light"
 		_geodesic_tput_cache[yellow]=${_geodesic_tput_cache[magenta]} # yellow is too light, use magenta instead
 	fi
 
@@ -297,18 +307,29 @@ function reset_terminal_colors() {
 
 _geodesic_tput_cache_init
 
+function auto-update-terminal-color-mode() {
+	[[ ${GEODESIC_TERM_COLOR_UPDATING} == "true" ]] || [[ ${GEODESIC_TERM_COLOR_AUTO:-true} != "true" ]] && return 0
+
+	# Ignore repeated signals while a signal is being processed
+	export GEODESIC_TERM_COLOR_UPDATING=true
+	update-terminal-color-mode quiet
+	if [[ $? -eq 9 ]]; then
+		# If the color detection failed, we disable automatic detection.
+		export GEODESIC_TERM_COLOR_AUTO=disabled
+	fi
+	unset GEODESIC_TERM_COLOR_UPDATING
+}
+
 # Although SIGWINCH is a standard signal to indicate the window *size* has changed,
 # some terminals (not sure which ones) also send a SIGWINCH signal when the window colors change.
 # For the other terminals, catching SIGWINCH gives users an easy way of triggering a color update: resize the window.
 # So we catch the signal to update the terminal colors, preserving any existing signal handlers.
-
+# However, we do the actual color update in a separate function called from the shell prompt command,
+# to avoid issues with async access to the TTY and other issues with running inside a signal handler.
 function _update-terminal-color-mode-sigwinch() {
-	[[ ${GEODESIC_TERM_COLOR_SIGNAL} == "true" ]] || [[ ${GEODESIC_TERM_COLOR_AUTO:-true} != "true" ]] && return 0
-
 	# Ignore repeated signals while a signal is being processed
-	export GEODESIC_TERM_COLOR_SIGNAL=true
-	update-terminal-color-mode quiet
-	unset GEODESIC_TERM_COLOR_SIGNAL
+	[[ ${GEODESIC_TERM_COLOR_UPDATING} == "true" ]] || [[ ${GEODESIC_TERM_COLOR_AUTO:-true} != "true" ]] && return 0
+	export GEODESIC_TERM_COLOR_UPDATING="needed"
 }
 
 if [[ ${GEODESIC_TERM_COLOR_AUTO} != "unsupported" ]] && _is_color_term; then

rootfs/etc/profile.d/prompt.sh

@@ -50,9 +50,14 @@ function reload() {
 	if [ "${current_screen_size}" != "${SCREEN_SIZE}" ]; then
 		echo "* Screen resized to ${current_screen_size}"
 		export SCREEN_SIZE=${current_screen_size}
+		# Use this opportunity to see if the terminal color mode has changed
+		export GEODESIC_TERM_COLOR_UPDATING="needed"
 		# Instruct shell that window size has changed to ensure lines wrap correctly
 		kill -WINCH $$
 	fi
+	if [[ $GEODESIC_TERM_COLOR_UPDATING == "needed" ]]; then
+		auto-update-terminal-color-mode
+	fi
 }
 
 # Define our own prompt

rootfs/templates/wrapper-body.sh

@@ -135,7 +135,19 @@ function parse_args() {
 		--no-motd*)
 			export GEODESIC_MOTD_ENABLED=false
 			;;
+		--workspace)
+			# WORKSPACE_FOLDER_HOST_DIR takes precedence over WORKSPACE, but we allow the command line option to override both
+			# So even thought the option is --workspace, we still set WORKSPACE_FOLDER_HOST_DIR
+			# We unset WORKSPACE to avoid a warning later when they are both set to different values
+			unset WORKSPACE
+			[ -n "$WORKSPACE_FOLDER_HOST_DIR" ] && echo "# Ignoring WORKSPACE_FOLDER_HOST_DIR=$WORKSPACE_FOLDER_HOST_DIR because --workspace is set" >&2
+			WORKSPACE_FOLDER_HOST_DIR="${1}"
+			shift
+			;;
 		--workspace=*)
+			# WORKSPACE_FOLDER_HOST_DIR takes precedence over WORKSPACE, but to save ourselves hassle over parsing the option,
+			# we just unset WORKSPACE_FOLDER_HOST_DIR and let normal option processing set WORKSPACE
+			[ -n "$WORKSPACE_FOLDER_HOST_DIR" ] && echo "# Ignoring WORKSPACE_FOLDER_HOST_DIR=$WORKSPACE_FOLDER_HOST_DIR because --workspace is set" >&2
 			unset WORKSPACE_FOLDER_HOST_DIR
 			# ;& # fall through only introduced in bash 4.0, we want to remain 3.2 compatible
 			options+=("${arg}")