[pull] dev from home-assistant:dev

homeassistant/components/ecobee/manifest.json

@@ -9,7 +9,7 @@
   },
   "iot_class": "cloud_polling",
   "loggers": ["pyecobee"],
-  "requirements": ["python-ecobee-api==0.2.20"],
+  "requirements": ["python-ecobee-api==0.3.2"],
   "single_config_entry": true,
   "zeroconf": [
     {

homeassistant/components/home_connect/manifest.json

@@ -22,6 +22,6 @@
   "iot_class": "cloud_push",
   "loggers": ["aiohomeconnect"],
   "quality_scale": "platinum",
-  "requirements": ["aiohomeconnect==0.23.0"],
+  "requirements": ["aiohomeconnect==0.23.1"],
   "zeroconf": ["_homeconnect._tcp.local."]
 }

homeassistant/components/home_connect/select.py

@@ -412,8 +412,8 @@ def update_native_value(self) -> None:
         """Set the program value."""
         event = self.appliance.events.get(cast(EventKey, self.bsh_key))
         self._attr_current_option = (
-            PROGRAMS_TRANSLATION_KEYS_MAP.get(cast(ProgramKey, event.value))
-            if event
+            PROGRAMS_TRANSLATION_KEYS_MAP.get(ProgramKey(event_value))
+            if event and isinstance(event_value := event.value, str)
             else None
         )
 

homeassistant/components/home_connect/sensor.py

@@ -556,8 +556,11 @@ def update_native_value(self) -> None:
         status = self.appliance.status[cast(StatusKey, self.bsh_key)].value
         self._update_native_value(status)
 
-    def _update_native_value(self, status: str | float) -> None:
+    def _update_native_value(self, status: str | float | None) -> None:
         """Set the value of the sensor based on the given value."""
+        if status is None:
+            self._attr_native_value = None
+            return
         match self.device_class:
             case SensorDeviceClass.TIMESTAMP:
                 self._attr_native_value = dt_util.utcnow() + timedelta(

homeassistant/components/homeassistant_connect_zbt2/config_flow.py

@@ -76,9 +76,18 @@ class ZBT2FirmwareMixin(ConfigEntryBaseFlow, FirmwareInstallFlowProtocol):
     """Mixin for Home Assistant Connect ZBT-2 firmware methods."""
 
     context: ConfigFlowContext
-    BOOTLOADER_RESET_METHODS = [ResetTarget.RTS_DTR]
+
     ZIGBEE_BAUDRATE = 460800
 
+    # Early ZBT-2 samples used RTS/DTR to trigger the bootloader, later ones use the
+    # baudrate method. Since the two are mutually exclusive we just use both.
+    BOOTLOADER_RESET_METHODS = [ResetTarget.RTS_DTR, ResetTarget.BAUDRATE]
+    APPLICATION_PROBE_METHODS = [
+        (ApplicationType.GECKO_BOOTLOADER, 115200),
+        (ApplicationType.EZSP, ZIGBEE_BAUDRATE),
+        (ApplicationType.SPINEL, 460800),
+    ]
+
     async def async_step_install_zigbee_firmware(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:

homeassistant/components/homeassistant_connect_zbt2/update.py

@@ -14,7 +14,6 @@
 from homeassistant.components.homeassistant_hardware.util import (
     ApplicationType,
     FirmwareInfo,
-    ResetTarget,
 )
 from homeassistant.components.update import UpdateDeviceClass
 from homeassistant.const import EntityCategory
@@ -24,6 +23,7 @@
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 
 from . import HomeAssistantConnectZBT2ConfigEntry
+from .config_flow import ZBT2FirmwareMixin
 from .const import DOMAIN, FIRMWARE, FIRMWARE_VERSION, HARDWARE_NAME, SERIAL_NUMBER
 
 _LOGGER = logging.getLogger(__name__)
@@ -134,7 +134,8 @@ async def async_setup_entry(
 class FirmwareUpdateEntity(BaseFirmwareUpdateEntity):
     """Connect ZBT-2 firmware update entity."""
 
-    bootloader_reset_methods = [ResetTarget.RTS_DTR]
+    BOOTLOADER_RESET_METHODS = ZBT2FirmwareMixin.BOOTLOADER_RESET_METHODS
+    APPLICATION_PROBE_METHODS = ZBT2FirmwareMixin.APPLICATION_PROBE_METHODS
 
     def __init__(
         self,

homeassistant/components/homeassistant_hardware/firmware_config_flow.py

@@ -81,6 +81,7 @@ class BaseFirmwareInstallFlow(ConfigEntryBaseFlow, ABC):
 
     ZIGBEE_BAUDRATE = 115200  # Default, subclasses may override
     BOOTLOADER_RESET_METHODS: list[ResetTarget] = []  # Default, subclasses may override
+    APPLICATION_PROBE_METHODS: list[tuple[ApplicationType, int]] = []
 
     _picked_firmware_type: PickedFirmwareType
     _zigbee_flow_strategy: ZigbeeFlowStrategy = ZigbeeFlowStrategy.RECOMMENDED
@@ -230,7 +231,11 @@ async def _install_firmware(
         # Installing new firmware is only truly required if the wrong type is
         # installed: upgrading to the latest release of the current firmware type
         # isn't strictly necessary for functionality.
-        self._probed_firmware_info = await probe_silabs_firmware_info(self._device)
+        self._probed_firmware_info = await probe_silabs_firmware_info(
+            self._device,
+            bootloader_reset_methods=self.BOOTLOADER_RESET_METHODS,
+            application_probe_methods=self.APPLICATION_PROBE_METHODS,
+        )
 
         firmware_install_required = self._probed_firmware_info is None or (
             self._probed_firmware_info.firmware_type != expected_installed_firmware_type
@@ -295,6 +300,7 @@ async def _install_firmware(
             fw_data=fw_data,
             expected_installed_firmware_type=expected_installed_firmware_type,
             bootloader_reset_methods=self.BOOTLOADER_RESET_METHODS,
+            application_probe_methods=self.APPLICATION_PROBE_METHODS,
             progress_callback=lambda offset, total: self.async_update_progress(
                 offset / total
             ),

homeassistant/components/homeassistant_hardware/manifest.json

@@ -7,7 +7,7 @@
   "documentation": "https://www.home-assistant.io/integrations/homeassistant_hardware",
   "integration_type": "system",
   "requirements": [
-    "universal-silabs-flasher==0.0.37",
+    "universal-silabs-flasher==0.1.0",
     "ha-silabs-firmware-client==0.3.0"
   ]
 }

homeassistant/components/homeassistant_hardware/update.py

@@ -86,7 +86,8 @@ class BaseFirmwareUpdateEntity(
 
     # Subclasses provide the mapping between firmware types and entity descriptions
     entity_description: FirmwareUpdateEntityDescription
-    bootloader_reset_methods: list[ResetTarget] = []
+    BOOTLOADER_RESET_METHODS: list[ResetTarget]
+    APPLICATION_PROBE_METHODS: list[tuple[ApplicationType, int]]
 
     _attr_supported_features = (
         UpdateEntityFeature.INSTALL | UpdateEntityFeature.PROGRESS
@@ -278,7 +279,8 @@ async def async_install(
                 device=self._current_device,
                 fw_data=fw_data,
                 expected_installed_firmware_type=self.entity_description.expected_firmware_type,
-                bootloader_reset_methods=self.bootloader_reset_methods,
+                bootloader_reset_methods=self.BOOTLOADER_RESET_METHODS,
+                application_probe_methods=self.APPLICATION_PROBE_METHODS,
                 progress_callback=self._update_progress,
                 domain=self._config_entry.domain,
             )

homeassistant/components/homeassistant_hardware/util.py

@@ -4,7 +4,7 @@
 
 import asyncio
 from collections import defaultdict
-from collections.abc import AsyncIterator, Callable, Iterable, Sequence
+from collections.abc import AsyncIterator, Callable, Sequence
 from contextlib import AsyncExitStack, asynccontextmanager
 from dataclasses import dataclass
 from enum import StrEnum
@@ -309,15 +309,20 @@ async def guess_firmware_info(hass: HomeAssistant, device_path: str) -> Firmware
 
 
 async def probe_silabs_firmware_info(
-    device: str, *, probe_methods: Iterable[ApplicationType] | None = None
+    device: str,
+    *,
+    bootloader_reset_methods: Sequence[ResetTarget],
+    application_probe_methods: Sequence[tuple[ApplicationType, int]],
 ) -> FirmwareInfo | None:
     """Probe the running firmware on a SiLabs device."""
     flasher = Flasher(
         device=device,
-        **(
-            {"probe_methods": [m.as_flasher_application_type() for m in probe_methods]}
-            if probe_methods
-            else {}
+        probe_methods=tuple(
+            (m.as_flasher_application_type(), baudrate)
+            for m, baudrate in application_probe_methods
+        ),
+        bootloader_reset=tuple(
+            m.as_flasher_reset_target() for m in bootloader_reset_methods
         ),
     )
 
@@ -343,11 +348,18 @@ async def probe_silabs_firmware_info(
 
 
 async def probe_silabs_firmware_type(
-    device: str, *, probe_methods: Iterable[ApplicationType] | None = None
+    device: str,
+    *,
+    bootloader_reset_methods: Sequence[ResetTarget],
+    application_probe_methods: Sequence[tuple[ApplicationType, int]],
 ) -> ApplicationType | None:
     """Probe the running firmware type on a SiLabs device."""
 
-    fw_info = await probe_silabs_firmware_info(device, probe_methods=probe_methods)
+    fw_info = await probe_silabs_firmware_info(
+        device,
+        bootloader_reset_methods=bootloader_reset_methods,
+        application_probe_methods=application_probe_methods,
+    )
     if fw_info is None:
         return None
 
@@ -359,12 +371,22 @@ async def async_flash_silabs_firmware(
     device: str,
     fw_data: bytes,
     expected_installed_firmware_type: ApplicationType,
-    bootloader_reset_methods: Sequence[ResetTarget] = (),
+    bootloader_reset_methods: Sequence[ResetTarget],
+    application_probe_methods: Sequence[tuple[ApplicationType, int]],
     progress_callback: Callable[[int, int], None] | None = None,
     *,
     domain: str = DOMAIN,
 ) -> FirmwareInfo:
     """Flash firmware to the SiLabs device."""
+    if not any(
+        method == expected_installed_firmware_type
+        for method, _ in application_probe_methods
+    ):
+        raise ValueError(
+            f"Expected installed firmware type {expected_installed_firmware_type!r}"
+            f" not in application probe methods {application_probe_methods!r}"
+        )
+
     async with async_firmware_update_context(hass, device, domain):
         firmware_info = await guess_firmware_info(hass, device)
         _LOGGER.debug("Identified firmware info: %s", firmware_info)
@@ -373,11 +395,9 @@ async def async_flash_silabs_firmware(
 
         flasher = Flasher(
             device=device,
-            probe_methods=(
-                ApplicationType.GECKO_BOOTLOADER.as_flasher_application_type(),
-                ApplicationType.EZSP.as_flasher_application_type(),
-                ApplicationType.SPINEL.as_flasher_application_type(),
-                ApplicationType.CPC.as_flasher_application_type(),
+            probe_methods=tuple(
+                (m.as_flasher_application_type(), baudrate)
+                for m, baudrate in application_probe_methods
             ),
             bootloader_reset=tuple(
                 m.as_flasher_reset_target() for m in bootloader_reset_methods
@@ -401,7 +421,13 @@ async def async_flash_silabs_firmware(
 
             probed_firmware_info = await probe_silabs_firmware_info(
                 device,
-                probe_methods=(expected_installed_firmware_type,),
+                bootloader_reset_methods=bootloader_reset_methods,
+                # Only probe for the expected installed firmware type
+                application_probe_methods=[
+                    (method, baudrate)
+                    for method, baudrate in application_probe_methods
+                    if method == expected_installed_firmware_type
+                ],
             )
 
         if probed_firmware_info is None:

homeassistant/components/homeassistant_sky_connect/config_flow.py

@@ -16,6 +16,7 @@
 from homeassistant.components.homeassistant_hardware.util import (
     ApplicationType,
     FirmwareInfo,
+    ResetTarget,
 )
 from homeassistant.components.usb import (
     usb_service_info_from_device,
@@ -79,6 +80,20 @@ class SkyConnectFirmwareMixin(ConfigEntryBaseFlow, FirmwareInstallFlowProtocol):
 
     context: ConfigFlowContext
 
+    ZIGBEE_BAUDRATE = 115200
+    # There is no hardware bootloader trigger
+    BOOTLOADER_RESET_METHODS: list[ResetTarget] = []
+    APPLICATION_PROBE_METHODS = [
+        (ApplicationType.GECKO_BOOTLOADER, 115200),
+        (ApplicationType.EZSP, ZIGBEE_BAUDRATE),
+        (ApplicationType.SPINEL, 460800),
+        # CPC baudrates can be removed once multiprotocol is removed
+        (ApplicationType.CPC, 115200),
+        (ApplicationType.CPC, 230400),
+        (ApplicationType.CPC, 460800),
+        (ApplicationType.ROUTER, 115200),
+    ]
+
     def _get_translation_placeholders(self) -> dict[str, str]:
         """Shared translation placeholders."""
         placeholders = {

homeassistant/components/homeassistant_sky_connect/update.py

@@ -23,6 +23,7 @@
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 
 from . import HomeAssistantSkyConnectConfigEntry
+from .config_flow import SkyConnectFirmwareMixin
 from .const import (
     DOMAIN,
     FIRMWARE,
@@ -151,8 +152,8 @@ async def async_setup_entry(
 class FirmwareUpdateEntity(BaseFirmwareUpdateEntity):
     """SkyConnect firmware update entity."""
 
-    # The ZBT-1 does not have a hardware bootloader trigger
-    bootloader_reset_methods = []
+    BOOTLOADER_RESET_METHODS = SkyConnectFirmwareMixin.BOOTLOADER_RESET_METHODS
+    APPLICATION_PROBE_METHODS = SkyConnectFirmwareMixin.APPLICATION_PROBE_METHODS
 
     def __init__(
         self,

homeassistant/components/homeassistant_yellow/config_flow.py

@@ -82,7 +82,18 @@ async def _install_firmware_step(
 class YellowFirmwareMixin(ConfigEntryBaseFlow, FirmwareInstallFlowProtocol):
     """Mixin for Home Assistant Yellow firmware methods."""
 
+    ZIGBEE_BAUDRATE = 115200
     BOOTLOADER_RESET_METHODS = [ResetTarget.YELLOW]
+    APPLICATION_PROBE_METHODS = [
+        (ApplicationType.GECKO_BOOTLOADER, 115200),
+        (ApplicationType.EZSP, ZIGBEE_BAUDRATE),
+        (ApplicationType.SPINEL, 460800),
+        # CPC baudrates can be removed once multiprotocol is removed
+        (ApplicationType.CPC, 115200),
+        (ApplicationType.CPC, 230400),
+        (ApplicationType.CPC, 460800),
+        (ApplicationType.ROUTER, 115200),
+    ]
 
     async def async_step_install_zigbee_firmware(
         self, user_input: dict[str, Any] | None = None
@@ -146,7 +157,11 @@ async def async_step_system(
         assert self._device is not None
 
         # We do not actually use any portion of `BaseFirmwareConfigFlow` beyond this
-        self._probed_firmware_info = await probe_silabs_firmware_info(self._device)
+        self._probed_firmware_info = await probe_silabs_firmware_info(
+            self._device,
+            bootloader_reset_methods=self.BOOTLOADER_RESET_METHODS,
+            application_probe_methods=self.APPLICATION_PROBE_METHODS,
+        )
 
         # Kick off ZHA hardware discovery automatically if Zigbee firmware is running
         if (

homeassistant/components/homeassistant_yellow/update.py

@@ -14,7 +14,6 @@
 from homeassistant.components.homeassistant_hardware.util import (
     ApplicationType,
     FirmwareInfo,
-    ResetTarget,
 )
 from homeassistant.components.update import UpdateDeviceClass
 from homeassistant.const import EntityCategory
@@ -24,6 +23,7 @@
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 
 from . import HomeAssistantYellowConfigEntry
+from .config_flow import YellowFirmwareMixin
 from .const import DOMAIN, FIRMWARE, FIRMWARE_VERSION, MANUFACTURER, MODEL, RADIO_DEVICE
 
 _LOGGER = logging.getLogger(__name__)
@@ -150,7 +150,8 @@ async def async_setup_entry(
 class FirmwareUpdateEntity(BaseFirmwareUpdateEntity):
     """Yellow firmware update entity."""
 
-    bootloader_reset_methods = [ResetTarget.YELLOW]  # Triggers a GPIO reset
+    BOOTLOADER_RESET_METHODS = YellowFirmwareMixin.BOOTLOADER_RESET_METHODS
+    APPLICATION_PROBE_METHODS = YellowFirmwareMixin.APPLICATION_PROBE_METHODS
 
     def __init__(
         self,

homeassistant/components/lamarzocco/update.py

@@ -125,7 +125,7 @@ def _raise_timeout_error() -> None:  # to avoid TRY301
             await self.coordinator.device.update_firmware()
             while (
                 update_progress := await self.coordinator.device.get_firmware()
-            ).command_status is UpdateStatus.IN_PROGRESS:
+            ).command_status is not UpdateStatus.UPDATED:
                 if counter >= MAX_UPDATE_WAIT:
                     _raise_timeout_error()
                 self._attr_update_percentage = update_progress.progress_percentage

homeassistant/components/lunatone/manifest.json

@@ -7,5 +7,5 @@
   "integration_type": "hub",
   "iot_class": "local_polling",
   "quality_scale": "silver",
-  "requirements": ["lunatone-rest-api-client==0.5.3"]
+  "requirements": ["lunatone-rest-api-client==0.5.7"]
 }

homeassistant/components/mobile_app/binary_sensor.py

@@ -61,10 +61,12 @@ def handle_sensor_registration(data):
 
         async_add_entities([MobileAppBinarySensor(data, config_entry)])
 
-    async_dispatcher_connect(
-        hass,
-        f"{DOMAIN}_{ENTITY_TYPE}_register",
-        handle_sensor_registration,
+    config_entry.async_on_unload(
+        async_dispatcher_connect(
+            hass,
+            f"{DOMAIN}_{ENTITY_TYPE}_register",
+            handle_sensor_registration,
+        )
     )