chore(deps): bump the go_modules group across 6 directories with 3 updates

[dependabot]

Bumps the go_modules group with 1 update in the /e2e/interchaintestv8 directory: filippo.io/edwards25519.
Bumps the go_modules group with 1 update in the /e2e/interchaintestv8/solana/go-anchor directory: filippo.io/edwards25519.
Bumps the go_modules group with 1 update in the /packages/go-abigen directory: github.com/ethereum/go-ethereum.
Bumps the go_modules group with 1 update in the /packages/go-anchor directory: filippo.io/edwards25519.
Bumps the go_modules group with 2 updates in the /tools/compute-ift-addresses directory: golang.org/x/crypto and github.com/ethereum/go-ethereum.
Bumps the go_modules group with 1 update in the /tools/solana-ibc directory: filippo.io/edwards25519.

Updates filippo.io/edwards25519 from 1.1.0 to 1.1.1

Commits

• d1c650a extra: initialize receiver in MultiScalarMult
• See full diff in compare view

Updates filippo.io/edwards25519 from 1.0.0-rc.1 to 1.1.1

Commits

• d1c650a extra: initialize receiver in MultiScalarMult
• See full diff in compare view

Updates github.com/ethereum/go-ethereum from 1.16.8 to 1.17.0

Release notes

Sourced from github.com/ethereum/go-ethereum's releases.

Eezo-Inlaid Circuitry (v1.17.0)

This is a feature release, with all accumulated development from the last 3 months. See below for the highlights.

Note that this release contains multiple critical security fixes, as well as many bug fixes, and is recommended for all users. However, if you are cautious about upgrades, you can also install v1.16.9 which has just the critical security fixes. Specifically, this release fixes CVE-2026-26313, CVE-2026-26314, CVE-2026-26315.

We recommend recreating your p2p node key after installing this update, which you can do by removing the DATADIR/geth/nodekey file before restarting geth. Note this will cause a change in the p2p node ID, which may break static peering setups.

Highlights

Path-based Archive Node with Proofs

The path-based archive node can now serve proofs (via eth_getProof) for the state of older blocks.

You can configure the block range that supports proving independently from other archive state availability. Specifically, you can use the --history.trienode command-line flag to set the amount of blocks for which tree nodes will be tracked.

This feature is disabled by default. Note that state history cannot easily be recovered once deleted, as it can only be generated by processing blocks. However, you can enable trienode history (and/or state history) at any time to turn a full node into a partial archive node, keeping state from that point in time onwards.

#32727, #32621, #33551, #32981, #33399, #32913, #33303, #33584, #33329, #33681, #33103, #33098, #33515, #32247

EraE History Support

Geth now suports the EraE file format, an archival format for post-merge chain history.

#32157, #33827

OpenTelemetry Tracing

OpenTelemetry tracing is now supported by the RPC server, including support for distributed tracing. We have also added some tracing spans for block processing via the engine API, i.e. engine_newPayload.

#33599, #33452, #33780, #33521

All Changes

Geth CLI

• The geth version-check subcommand has been removed. This command checked the geth website for signed vulnerability notices, and would tell if updates are necessary (#33498)
• There is now a --miner.maxblobs command-line flag to set a limit on blobs included in built blocks (#33129, #33302)
• Geth now supports continuous profiling with Grafana Pyroscope (#33623)
• A rare bug that could halt block production in geth --dev mode was fixed (#33146)
• A new --rpc.rangelimit flag configures the maximum block range for eth_getLogs (#33163)
• geth --exitwhensynced will now set the finalized and safe block (#33038)
• geth --ethstats now reports the newPayload processing time to the stats server (#33395)
• A lot of minor issues in Geth's command-line flag processing have been fixed (#33379, #33338, #33330, #32999, #33279, #33252)
• The evm blocktest command can now read filenames from stdin when no path is provided (#32824)

Fork Implementation

... (truncated)

Commits

• 0cf3d3b version: release go-ethereum v1.17.0 stable
• 9b78f45 crypto/secp256k1: fix coordinate check
• c709c19 eth/catalyst: add initial OpenTelemetry tracing for newPayload (#33521)
• 550ca91 consensus/misc: hardening header verification (#33860)
• a4b3898 internal/telemetry: don't create internal spans without parents (#33780)
• 0cba803 eth/protocols/eth, eth/protocols/snap: delayed p2p message decoding (#33835)
• ad88b68 internal/download: show progress bar only if server gives length (#33842)
• c50e5ed cmd/geth, internal/telemetry: wire OpenTelemetry tracing via CLI flags (#33484)
• d8b92cb rpc,internal/telemetry: fix deferred spanEnd to capture errors via pointer (#...
• ac85a6f rlp: add back Iterator.Count, with fixes (#33841)
• Additional commits viewable in compare view

Updates filippo.io/edwards25519 from 1.0.0-rc.1 to 1.1.1

Commits

• d1c650a extra: initialize receiver in MultiScalarMult
• See full diff in compare view

Updates golang.org/x/crypto from 0.41.0 to 0.45.0

Commits

• 4e0068c go.mod: update golang.org/x dependencies
• e79546e ssh: curb GSSAPI DoS risk by limiting number of specified OIDs
• f91f7a7 ssh/agent: prevent panic on malformed constraint
• 2df4153 acme/autocert: let automatic renewal work with short lifetime certs
• bcf6a84 acme: pass context to request
• b4f2b62 ssh: fix error message on unsupported cipher
• 79ec3a5 ssh: allow to bind to a hostname in remote forwarding
• 122a78f go.mod: update golang.org/x dependencies
• c0531f9 all: eliminate vet diagnostics
• 0997000 all: fix some comments
• Additional commits viewable in compare view

Updates github.com/ethereum/go-ethereum from 1.16.8 to 1.17.0

Release notes

Sourced from github.com/ethereum/go-ethereum's releases.

Eezo-Inlaid Circuitry (v1.17.0)

This is a feature release, with all accumulated development from the last 3 months. See below for the highlights.

Note that this release contains multiple critical security fixes, as well as many bug fixes, and is recommended for all users. However, if you are cautious about upgrades, you can also install v1.16.9 which has just the critical security fixes. Specifically, this release fixes CVE-2026-26313, CVE-2026-26314, CVE-2026-26315.

We recommend recreating your p2p node key after installing this update, which you can do by removing the DATADIR/geth/nodekey file before restarting geth. Note this will cause a change in the p2p node ID, which may break static peering setups.

Highlights

Path-based Archive Node with Proofs

The path-based archive node can now serve proofs (via eth_getProof) for the state of older blocks.

You can configure the block range that supports proving independently from other archive state availability. Specifically, you can use the --history.trienode command-line flag to set the amount of blocks for which tree nodes will be tracked.

This feature is disabled by default. Note that state history cannot easily be recovered once deleted, as it can only be generated by processing blocks. However, you can enable trienode history (and/or state history) at any time to turn a full node into a partial archive node, keeping state from that point in time onwards.

#32727, #32621, #33551, #32981, #33399, #32913, #33303, #33584, #33329, #33681, #33103, #33098, #33515, #32247

EraE History Support

Geth now suports the EraE file format, an archival format for post-merge chain history.

#32157, #33827

OpenTelemetry Tracing

OpenTelemetry tracing is now supported by the RPC server, including support for distributed tracing. We have also added some tracing spans for block processing via the engine API, i.e. engine_newPayload.

#33599, #33452, #33780, #33521

All Changes

Geth CLI

• The geth version-check subcommand has been removed. This command checked the geth website for signed vulnerability notices, and would tell if updates are necessary (#33498)
• There is now a --miner.maxblobs command-line flag to set a limit on blobs included in built blocks (#33129, #33302)
• Geth now supports continuous profiling with Grafana Pyroscope (#33623)
• A rare bug that could halt block production in geth --dev mode was fixed (#33146)
• A new --rpc.rangelimit flag configures the maximum block range for eth_getLogs (#33163)
• geth --exitwhensynced will now set the finalized and safe block (#33038)
• geth --ethstats now reports the newPayload processing time to the stats server (#33395)
• A lot of minor issues in Geth's command-line flag processing have been fixed (#33379, #33338, #33330, #32999, #33279, #33252)
• The evm blocktest command can now read filenames from stdin when no path is provided (#32824)

Fork Implementation

... (truncated)

Commits

• 0cf3d3b version: release go-ethereum v1.17.0 stable
• 9b78f45 crypto/secp256k1: fix coordinate check
• c709c19 eth/catalyst: add initial OpenTelemetry tracing for newPayload (#33521)
• 550ca91 consensus/misc: hardening header verification (#33860)
• a4b3898 internal/telemetry: don't create internal spans without parents (#33780)
• 0cba803 eth/protocols/eth, eth/protocols/snap: delayed p2p message decoding (#33835)
• ad88b68 internal/download: show progress bar only if server gives length (#33842)
• c50e5ed cmd/geth, internal/telemetry: wire OpenTelemetry tracing via CLI flags (#33484)
• d8b92cb rpc,internal/telemetry: fix deferred spanEnd to capture errors via pointer (#...
• ac85a6f rlp: add back Iterator.Count, with fixes (#33841)
• Additional commits viewable in compare view

Updates filippo.io/edwards25519 from 1.0.0-rc.1 to 1.1.1

Commits

• d1c650a extra: initialize receiver in MultiScalarMult
• See full diff in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions
  You can disable automated security fix PRs for this repo from the Security Alerts page.

[codecov]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 99.91%. Comparing base (0daf719) to head (c3a0837).
⚠️ Report is 4 commits behind head on main.

Additional details and impacted files

@@           Coverage Diff           @@
##             main     #945   +/-   ##
=======================================
  Coverage   99.91%   99.91%           
=======================================
  Files          27       27           
  Lines        1120     1120           
=======================================
  Hits         1119     1119           
  Misses          1        1           

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[srdtrk]

fails e2es

[dependabot]

This pull request was built based on a group rule. Closing it will not ignore any of these versions in future pull requests.

To ignore these dependencies, configure ignore rules in dependabot.yml