Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.12:

UAPI Changes:

virtio:
- Define DRM capset

Cross-subsystem Changes:

dma-buf:
- heaps: Clean up documentation

printk:
- Pass description to kmsg_dump()

Core Changes:

CI:
- Update IGT tests
- Point upstream repo to GitLab instance

modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support

panic:
- Avoid build-time interference with framebuffer console

docs:
- Document Colorspace property

scheduler:
- Remove full_recover from drm_sched_start

TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory

Driver Changes:

amdgpu:
- Support Power Saving Policy connector property

ast:
- astdp: Support AST2600 with VGA; Clean up HPD

bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable

gma500:
- Update i2c terminology

ivpu:
- Add MODULE_FIRMWARE()

lcdif:
- Fix pixel clock

loongson:
- Use GEM refcount over TTM's

mgag200:
- Improve BMC handling
- Support VBLANK intterupts

nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's

panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
  DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
  BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
  CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
  for code sharing

sti:
- Fix module owner

stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt

tegra:
- Call drm_atomic_helper_shutdown()

v3d:
- Clean up perfmon

vkms:
- Clean up

Signed-off-by: Daniel Vetter <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Author: danvet

Documentation/accel/qaic/qaic.rst

@@ -147,12 +147,6 @@ DRM_IOCTL_QAIC_PERF_STATS_BO
   recent execution of a BO. This allows userspace to construct an end to end
   timeline of the BO processing for a performance analysis.
 
-DRM_IOCTL_QAIC_PART_DEV
-  This IOCTL allows userspace to request a duplicate "shadow device". This extra
-  accelN device is associated with a specific partition of resources on the
-  AIC100 device and can be used for limiting a process to some subset of
-  resources.
-
 DRM_IOCTL_QAIC_DETACH_SLICE_BO
   This IOCTL allows userspace to remove the slicing information from a BO that
   was originally provided by a call to DRM_IOCTL_QAIC_ATTACH_SLICE_BO. This

Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml

@@ -92,12 +92,31 @@ properties:
             reference to a valid DPI output or input endpoint node.
 
       port@2:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
             eDP/DP output port. The remote endpoint phandle should be a
             reference to a valid eDP panel input endpoint node. This port is
             optional, treated as DP panel if not defined
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              toshiba,pre-emphasis:
+                description:
+                  Display port output Pre-Emphasis settings for both DP lanes.
+                $ref: /schemas/types.yaml#/definitions/uint8-array
+                minItems: 2
+                maxItems: 2
+                items:
+                  enum:
+                    - 0 # No pre-emphasis
+                    - 1 # 3.5dB pre-emphasis
+                    - 2 # 6dB pre-emphasis
+
     oneOf:
       - required:
           - port@0

Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml

@@ -9,20 +9,20 @@ title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
 maintainers:
   - Manuel Traut <[email protected]>
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
   compatible:
     enum:
         # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
       - boe,th101mb31ig002-28a
+        # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+      - starry,er88577
 
   reg:
     maxItems: 1
 
   backlight: true
   enable-gpios: true
+  reset-gpios: true
   power-supply: true
   port: true
   rotation: true
@@ -33,6 +33,20 @@ required:
   - enable-gpios
   - power-supply
 
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      properties:
+        compatible:
+          # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+          const: starry,er88577
+    then:
+      properties:
+        reset-gpios: false
+    else:
+      required:
+        - reset-gpios
+
 additionalProperties: false
 
 examples:
@@ -47,6 +61,7 @@ examples:
             reg = <0>;
             backlight = <&backlight_lcd0>;
             enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
             rotation = <90>;
             power-supply = <&vcc_3v3>;
             port {

Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml

@@ -15,14 +15,12 @@ description:
   such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
   a MIPI-DSI video interface.
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
   compatible:
     items:
       - enum:
           - hannstar,hsd060bhw4
+          - microchip,ac40t08a-mipi-panel
           - powkiddy,x55-panel
       - const: himax,hx8394
 
@@ -46,14 +44,25 @@ properties:
 required:
   - compatible
   - reg
-  - reset-gpios
   - backlight
   - port
   - vcc-supply
   - iovcc-supply
 
 additionalProperties: false
 
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - microchip,ac40t08a-mipi-panel
+    then:
+      required:
+        - reset-gpios
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>

Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml

@@ -16,6 +16,7 @@ properties:
   compatible:
     items:
       - enum:
+          - densitron,dmt028vghmcmi-1d
           - ortustech,com35h3p70ulc
       - const: ilitek,ili9806e
 

Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml

@@ -18,6 +18,7 @@ properties:
       - enum:
           - chongzhou,cz101b4001
           - kingdisplay,kd101ne3-40ti
+          - melfas,lmfbx101117480
           - radxa,display-10hd-ad001
           - radxa,display-8hd-ad002
       - const: jadard,jd9365da-h3

Documentation/gpu/todo.rst

@@ -475,25 +475,22 @@ Remove disable/unprepare in remove/shutdown in panel-simple and panel-edp
 As of commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled in
 drm_panel"), we have a check in the drm_panel core to make sure nobody
 double-calls prepare/enable/disable/unprepare. Eventually that should probably
-be turned into a WARN_ON() or somehow made louder, but right now we actually
-expect it to trigger and so we don't want it to be too loud.
-
-Specifically, that warning will trigger for panel-edp and panel-simple at
-shutdown time because those panels hardcode a call to drm_panel_disable()
-and drm_panel_unprepare() at shutdown and remove time that they call regardless
-of panel state. On systems with a properly coded DRM modeset driver that
-calls drm_atomic_helper_shutdown() this is pretty much guaranteed to cause
-the warning to fire.
-
-Unfortunately we can't safely remove the calls in panel-edp and panel-simple
-until we're sure that all DRM modeset drivers that are used with those panels
-properly call drm_atomic_helper_shutdown(). This TODO item is to validate
-that all DRM modeset drivers used with panel-edp and panel-simple properly
-call drm_atomic_helper_shutdown() and then remove the calls to
-disable/unprepare from those panels. Alternatively, this TODO item could be
-removed by convincing stakeholders that those calls are fine and downgrading
-the error message in drm_panel_disable() / drm_panel_unprepare() to a
-debug-level message.
+be turned into a WARN_ON() or somehow made louder.
+
+At the moment, we expect that we may still encounter the warnings in the
+drm_panel core when using panel-simple and panel-edp. Since those panel
+drivers are used with a lot of different DRM modeset drivers they still
+make an extra effort to disable/unprepare the panel themsevles at shutdown
+time. Specifically we could still encounter those warnings if the panel
+driver gets shutdown() _before_ the DRM modeset driver and the DRM modeset
+driver properly calls drm_atomic_helper_shutdown() in its own shutdown()
+callback. Warnings could be avoided in such a case by using something like
+device links to ensure that the panel gets shutdown() after the DRM modeset
+driver.
+
+Once all DRM modeset drivers are known to shutdown properly, the extra
+calls to disable/unprepare in remove/shutdown in panel-simple and panel-edp
+should be removed and this TODO item marked complete.
 
 Contact: Douglas Anderson <[email protected]>
 

MAINTAINERS

@@ -1013,6 +1013,13 @@ S:	Supported
 T:	git https://gitlab.freedesktop.org/agd5f/linux.git
 F:	drivers/gpu/drm/amd/display/
 
+AMD DISPLAY CORE - DML
+M:	Chaitanya Dhere <[email protected]>
+M:	Jun Lei <[email protected]>
+S:	Supported
+F:	drivers/gpu/drm/amd/display/dc/dml/
+F:	drivers/gpu/drm/amd/display/dc/dml2/
+
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
 M:	Huang Rui <[email protected]>
 L:	[email protected]
@@ -6660,6 +6667,7 @@ F:	drivers/dma-buf/dma-heap.c
 F:	drivers/dma-buf/heaps/*
 F:	include/linux/dma-heap.h
 F:	include/uapi/linux/dma-heap.h
+F:	tools/testing/selftests/dmabuf-heaps/
 
 DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422
 M:	Lukasz Luba <[email protected]>

arch/powerpc/kernel/nvram_64.c

@@ -73,7 +73,7 @@ static const char *nvram_os_partitions[] = {
 };
 
 static void oops_to_nvram(struct kmsg_dumper *dumper,
-			  enum kmsg_dump_reason reason);
+			  struct kmsg_dump_detail *detail);
 
 static struct kmsg_dumper nvram_kmsg_dumper = {
 	.dump = oops_to_nvram
@@ -643,7 +643,7 @@ void __init nvram_init_oops_partition(int rtas_partition_exists)
  * partition.  If that's too much, go back and capture uncompressed text.
  */
 static void oops_to_nvram(struct kmsg_dumper *dumper,
-			  enum kmsg_dump_reason reason)
+			  struct kmsg_dump_detail *detail)
 {
 	struct oops_log_info *oops_hdr = (struct oops_log_info *)oops_buf;
 	static unsigned int oops_count = 0;
@@ -655,7 +655,7 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 	unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
 	int rc = -1;
 
-	switch (reason) {
+	switch (detail->reason) {
 	case KMSG_DUMP_SHUTDOWN:
 		/* These are almost always orderly shutdowns. */
 		return;
@@ -671,7 +671,7 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 		break;
 	default:
 		pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n",
-		       __func__, (int) reason);
+		       __func__, (int) detail->reason);
 		return;
 	}
 

arch/powerpc/platforms/powernv/opal-kmsg.c

@@ -20,13 +20,13 @@
  * message, it just ensures that OPAL completely flushes the console buffer.
  */
 static void kmsg_dump_opal_console_flush(struct kmsg_dumper *dumper,
-				     enum kmsg_dump_reason reason)
+				     struct kmsg_dump_detail *detail)
 {
 	/*
 	 * Outside of a panic context the pollers will continue to run,
 	 * so we don't need to do any special flushing.
 	 */
-	if (reason != KMSG_DUMP_PANIC)
+	if (detail->reason != KMSG_DUMP_PANIC)
 		return;
 
 	opal_flush_console(0);