An electric board which enables you to control your home appliances far from home. This is an IoT device to make home smarter. This is our first prototype. Video Preview - https://drive.google.com/file/d/1p9NIu56NuiJvuRx7MYno8UnidGFYKtBa/view?usp=sharing
- Easy to install
- SMS controlled fan, bulb, etc.
- Automatic fan speed controlling
- Motion controlled stair lights
- Arduino Nano/Uno
- GSM Module (SIM900A)
- PIR (Motion Sensor)
- DHT11 (Temperature Sensor)
- Send SMS to the inserted SIM in GSM module
- Use only the given commands (Mentioned in the file)
| Sl No. | Description | Pin |
|---|---|---|
| 1 | Rlay 1 (Bulb 1) | 4 |
| 2 | Rlay 2 (Bulb 2) | 5 |
| 3 | Rlay 3 (Bulb 3) | 6 |
| 4 | Rlay 4 (fan 1 ) | 7 |
| 5 | Rx(Arduino) | 3 |
| 6 | Tx(Arduino) | 2 |
| 7 | Temperature pin | 12 |
| 9 | PIR Pin | A2 |
| 10 | Mode 1 | 11 |
| 11 | Mode 2 | 10 |
| 12 | Mode 3 | 9 |
| 13 | Mode 4 | 8 |
Note:- Pin description will not change if you use Arduino uno
| Sl No. | Command | Description |
|---|---|---|
| 1 | b1on | Turn on bulb 1 |
| 2 | b1off | Turn off bulb 1 |
| 3 | b2on | Turn on bulb 2 |
| 4 | b2off | Turn off bulb 2 |
| 5 | b3on | Turn on bulb 3 |
| 6 | b3off | Turn off bulb 3 |
| 7 | b4on | Turn on bulb 4 |
| 8 | b4off | Turn off bulb 4 |
| 9 | f1on | Turn on fan 1 |
| 10 | f1off | Turn off fan 1 |
| 11 | all on | Turn on all appliance |
| 12 | all off | Turn off all |
| 13 | pir=on | Activate PIR sensor |
| 14 | pir=off | Deactivate PIR sensor |