*-SqlDscRSUnattendedExecutionAccount: Add new commands
#2410
Conversation
WalkthroughAdds two new PowerShell functions for managing SSRS/Power BI Report Server unattended execution accounts, enhances Changes
Estimated code review effort🎯 4 (Complex) | ⏱️ ~45 minutes Possibly related PRs
🚥 Pre-merge checks | ✅ 3✅ Passed checks (3 passed)
✏️ Tip: You can configure your own custom pre-merge checks in the settings. Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out. Comment |
…nnecessary script blocks
Codecov Report✅ All modified and coverable lines are covered by tests. Additional details and impacted files@@ Coverage Diff @@
## main #2410 +/- ##
=====================================
Coverage 94% 94%
=====================================
Files 215 217 +2
Lines 10864 10926 +62
=====================================
+ Hits 10243 10305 +62
Misses 621 621
🚀 New features to boost your workflow:
|
… handling intermittent failures
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 4
🤖 Fix all issues with AI agents
In `@source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1`:
- Around line 115-125: Replace the catch block to use the helper functions:
build the message with
($script:localizedData.Remove_SqlDscRSUnattendedExecutionAccount_FailedToRemove
-f $instanceName, $_.Exception.Message), create an exception via
New-InvalidOperationException -Message <that message>, create an ErrorRecord via
New-ErrorRecord -Exception <that exception> -ErrorId 'RSRSUEA0001' -Category
InvalidOperation -TargetObject $Configuration, and pass that ErrorRecord to
$PSCmdlet.ThrowTerminatingError; this replaces the direct ErrorRecord
constructor and fixes the ErrorId to match the localized suffix (RSRSUEA0001).
In `@source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1`:
- Around line 139-149: Replace the manual ErrorRecord construction in the catch
of Set-SqlDscRSUnattendedExecutionAccount: create an InvalidOperationException
using New-InvalidOperationException with the formatted localized message (use
$instanceName and $_.Exception.Message), then create an ErrorRecord via
New-ErrorRecord (pass the exception and correct ErrorId 'SSRSUEA0001'), and pass
that record to $PSCmdlet.ThrowTerminatingError; this uses the helper functions
and fixes the ErrorId mismatch.
In `@source/WikiSource/Deploy-Power-BI-Report-Server.md`:
- Line 834: Replace the incorrect command name occurrences of
Get-SqlDscRSSqlCertificateBinding with the correct
Get-SqlDscRSSslCertificateBinding; search for any references to
Get-SqlDscRSSqlCertificateBinding in the doc and update them to
Get-SqlDscRSSslCertificateBinding (e.g., the pipeline expression using $rsConfig
| Get-SqlDscRSSslCertificateBinding) so the command name reflects "SSL" not
"SQL".
In
`@tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1`:
- Around line 41-45: The context "When removing unattended execution account for
SQL Server Reporting Services" tagged 'Integration_SQL2017_RS' is missing its
test; add an It block that uses the $script:configuration set in BeforeAll and
invokes Remove-SqlDscRSUnattendedExecutionAccount to perform the removal and
assert success. Specifically, create an It block (matching other contexts) that
calls Remove-SqlDscRSUnattendedExecutionAccount -Configuration
$script:configuration -InstanceName 'SSRS' -ErrorAction 'Stop' (or appropriate
parameters used in other tests) and include an assertion (e.g., that the cmdlet
returned true or no error was thrown) to validate the operation.
🧹 Nitpick comments (12)
source/Public/Set-SqlDscRSSslCertificateBinding.ps1 (2)
96-103: Consider typingConfigurationasCimInstancenow that output isCimInstance.Currently
[System.Object] $Configurationwill accept anything and then fail later when.InstanceNameis accessed; a stronger type improves parameter binding errors and keeps help/usage consistent.Proposed diff
[Parameter(Mandatory = $true, ValueFromPipeline = $true)] - [System.Object] + [Microsoft.Management.Infrastructure.CimInstance] $Configuration,
162-185: Prefer culture-invariant / null-safe hash normalization (even though hex is usually safe).
ToLower()is culture-sensitive and will throw ifCertificateHashis ever$null. A small guard +ToLowerInvariant()(or a case-insensitive compare) makes this more robust.Proposed diff
- $normalizedHash = $CertificateHash.ToLower() + $normalizedHash = $CertificateHash.ToLowerInvariant() # Remove bindings that don't match the desired configuration foreach ($binding in $applicationBindings) { - $shouldRemove = $binding.CertificateHash.ToLower() -ne $normalizedHash -or + $bindingHash = if ($null -ne $binding.CertificateHash) { $binding.CertificateHash.ToLowerInvariant() } else { '' } + + $shouldRemove = $bindingHash -ne $normalizedHash -or $binding.IPAddress -ne $IPAddress -or $binding.Port -ne $Port } # Check if the desired binding already exists $bindingExists = $applicationBindings | Where-Object -FilterScript { - $_.CertificateHash.ToLower() -eq $normalizedHash -and + ($null -ne $_.CertificateHash) -and + $_.CertificateHash.ToLowerInvariant() -eq $normalizedHash -and $_.IPAddress -eq $IPAddress -and $_.Port -eq $Port }source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1 (1)
83-83: OutputType should beCimInstancefor consistency.Other similar commands in this PR (e.g.,
Remove-SqlDscRSSslCertificateBinding) use[OutputType([Microsoft.Management.Infrastructure.CimInstance])]. This should be consistent sincePassThrureturns the configuration CIM instance.Suggested fix
- [OutputType([System.Object])] + [OutputType([Microsoft.Management.Infrastructure.CimInstance])]source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1 (1)
73-73: OutputType should beCimInstancefor consistency.Same as
Set-SqlDscRSUnattendedExecutionAccount, this should use[OutputType([Microsoft.Management.Infrastructure.CimInstance])]sincePassThrureturns the configuration CIM instance.Suggested fix
- [OutputType([System.Object])] + [OutputType([Microsoft.Management.Infrastructure.CimInstance])]tests/Unit/Public/Get-SqlDscRSConfiguration.Tests.ps1 (2)
65-75: Test description doesn't match assertions.The
Itdescription states "Should have RetryCount default value of 1" but the test only verifies the parameter is non-mandatory and has typeInt32. The actual default value of 1 is not validated.Consider either:
- Update the description to "Should have RetryCount as a non-mandatory Int32 parameter"
- Or add an assertion to verify the actual default value
Option 1: Update description to match assertions
- It 'Should have RetryCount default value of 1' { + It 'Should have RetryCount as a non-mandatory Int32 parameter' { $parameterInfo = (Get-Command -Name 'Get-SqlDscRSConfiguration').Parameters['RetryCount'] $parameterInfo.Attributes.Where({ $_ -is [System.Management.Automation.ParameterAttribute] }).Mandatory | Should -BeFalse - $defaultValue = $parameterInfo.Attributes.Where({ $_ -is [System.Management.Automation.PSDefaultValueAttribute] }).Value - - # Check via reflection since default values are set in the param block - $functionInfo = Get-Command -Name 'Get-SqlDscRSConfiguration' - $functionInfo.Parameters['RetryCount'].ParameterType | Should -Be ([System.Int32]) + $parameterInfo.ParameterType | Should -Be ([System.Int32]) }
77-82: Test description doesn't match assertions.Similar to the previous test, the description "Should have RetryDelaySeconds default value of 30" is misleading since only non-mandatory status and type are verified, not the actual default value.
Update description to match assertions
- It 'Should have RetryDelaySeconds default value of 30' { + It 'Should have RetryDelaySeconds as a non-mandatory Int32 parameter' { $parameterInfo = (Get-Command -Name 'Get-SqlDscRSConfiguration').Parameters['RetryDelaySeconds'] $parameterInfo.Attributes.Where({ $_ -is [System.Management.Automation.ParameterAttribute] }).Mandatory | Should -BeFalse $parameterInfo.ParameterType | Should -Be ([System.Int32]) }tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1 (3)
75-81: Avoid usingShould -Not -Throw– invoke commands directly.Per coding guidelines, commands should be invoked directly without wrapping in
Should -Not -Throw. The mock invocation assertion already validates successful execution.♻️ Invoke command directly
It 'Should remove unattended execution account without errors' { - { $mockCimInstance | Remove-SqlDscRSUnattendedExecutionAccount -Confirm:$false } | Should -Not -Throw + $mockCimInstance | Remove-SqlDscRSUnattendedExecutionAccount -Confirm:$false Should -Invoke -CommandName Invoke-RsCimMethod -ParameterFilter { $MethodName -eq 'RemoveUnattendedExecutionAccount' } -Exactly -Times 1 }
116-120: Avoid usingShould -Not -Throw– invoke commands directly.♻️ Invoke command directly
It 'Should remove unattended execution account without confirmation' { - { $mockCimInstance | Remove-SqlDscRSUnattendedExecutionAccount -Force } | Should -Not -Throw + $mockCimInstance | Remove-SqlDscRSUnattendedExecutionAccount -Force Should -Invoke -CommandName Invoke-RsCimMethod -Exactly -Times 1 }
164-168: Avoid usingShould -Not -Throw– invoke commands directly.♻️ Invoke command directly
It 'Should remove unattended execution account' { - { Remove-SqlDscRSUnattendedExecutionAccount -Configuration $mockCimInstance -Confirm:$false } | Should -Not -Throw + Remove-SqlDscRSUnattendedExecutionAccount -Configuration $mockCimInstance -Confirm:$false Should -Invoke -CommandName Invoke-RsCimMethod -Exactly -Times 1 }tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1 (1)
52-54: AvoidShould -Not -Throw- invoke commands directly.Per coding guidelines,
Should -Not -Throwshould not be used in tests. Instead, invoke the command directly and let any exception fail the test naturally with-ErrorAction 'Stop'.♻️ Proposed refactor
It 'Should not throw when removing unattended execution account' { - { $script:configuration | Remove-SqlDscRSUnattendedExecutionAccount -Force -ErrorAction 'Stop' } | Should -Not -Throw + $script:configuration | Remove-SqlDscRSUnattendedExecutionAccount -Force -ErrorAction 'Stop' }Apply the same change to the other
Itblocks at lines 62-64 and 72-74.tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1 (2)
42-56: Context descriptions should be unique across SQL Server versions.Lines 42, 58, and 71 have identical Context descriptions despite targeting different SQL Server versions (2017, 2019, 2022). While the tags differentiate them at runtime, unique descriptions improve readability and test output clarity.
Also, the note comment on line 52 explaining potential test failures should be consistent across all similar Context blocks.
♻️ Suggested improvement
- Context 'When setting unattended execution account for SQL Server Reporting Services' -Tag @('Integration_SQL2017_RS') { + Context 'When setting unattended execution account for SQL Server Reporting Services 2017' -Tag @('Integration_SQL2017_RS') {Apply similar version-specific naming to the other Context blocks (2019, 2022).
58-69: Add note comment for consistency.This Context block (and the SQL2022 block at line 71) should include the same note comment present in the SQL2017 Context explaining that the test may fail if the account doesn't exist.
♻️ Suggested addition
$script:testCredential = [System.Management.Automation.PSCredential]::new($script:testUsername, $script:testPassword) } + # Note: This test may fail if the account doesn't exist. This is expected behavior. It 'Should set unattended execution account' {
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
Show resolved
Hide resolved
…and Set-SqlDscRSUnattendedExecutionAccount functions for improved clarity and consistency Add integration test to verify no exceptions are thrown when removing unattended execution account
…eamline test cases
There was a problem hiding this comment.
Actionable comments posted: 1
🤖 Fix all issues with AI agents
In `@tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1`:
- Around line 134-136: The test expects a terminating error with ErrorId
'RSRUEA0001' but the implementation in Remove-SqlDscRSUnattendedExecutionAccount
(Remove-SqlDscRSUnattendedExecutionAccount.ps1) throws 'RSRSUEA0001' (extra
'S'); fix by updating the thrown/Write-Error/Throw call inside
Remove-SqlDscRSUnattendedExecutionAccount to use the correct ErrorId
'RSRUEA0001' so the test and implementation match.
♻️ Duplicate comments (1)
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1 (1)
115-124: Error handling correctly uses helper commands.This properly uses
New-ExceptionandNew-ErrorRecordfor public functions as clarified in previous review discussion. The ErrorId'RSRSUEA0001'aligns with the expected pattern.
🧹 Nitpick comments (1)
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1 (1)
36-89: Consider consolidating duplicated credential setup.The same credential setup logic is repeated in all four contexts (lines 39-41, 53-55, 67-69, 81-83). While functional, consider using
BeforeDiscoveryor a sharedBeforeAllat theDescribelevel to reduce duplication.♻️ Potential consolidation
Describe 'Set-SqlDscRSUnattendedExecutionAccount' { + BeforeAll { + $script:testUsername = '{0}\TestUnattendedAccount' -f (Get-ComputerName) + $script:testPassword = ConvertTo-SecureString -String 'P@ssw0rd123!' -AsPlainText -Force + $script:testCredential = [System.Management.Automation.PSCredential]::new($script:testUsername, $script:testPassword) + } + Context 'When setting unattended execution account for SQL Server Reporting Services 2017' -Tag @('Integration_SQL2017_RS') { BeforeAll { $script:configuration = Get-SqlDscRSConfiguration -InstanceName 'SSRS' -ErrorAction 'Stop' - - $script:testUsername = '{0}\TestUnattendedAccount' -f (Get-ComputerName) - $script:testPassword = ConvertTo-SecureString -String 'P@ssw0rd123!' -AsPlainText -Force - $script:testCredential = [System.Management.Automation.PSCredential]::new($script:testUsername, $script:testPassword) }
📜 Review details
Configuration used: Organization UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (5)
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
🧰 Additional context used
📓 Path-based instructions (14)
source/**/*.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-localization.instructions.md)
source/**/*.ps1: Localize all Write-Debug, Write-Verbose, Write-Error, Write-Warning and $PSCmdlet.ThrowTerminatingError() messages in PowerShell scripts
Use localized string keys from $script:localizedData, not hardcoded strings, in diagnostic messages
Reference localized strings using the syntax: Write-Verbose -Message ($script:localizedData.KeyName -f $value1)Localize all strings using string keys; remove any orphaned string keys
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
⚙️ CodeRabbit configuration file
source/**/*.ps1: # Localization GuidelinesRequirements
- Localize all Write-Debug, Write-Verbose, Write-Error, Write-Warning and $PSCmdlet.ThrowTerminatingError() messages
- Use localized string keys, not hardcoded strings
- Assume
$script:localizedDatais availableString Files
- Commands/functions:
source/en-US/{MyModuleName}.strings.psd1- Class resources:
source/en-US/{ResourceClassName}.strings.psd1Key Naming Patterns
- Format:
Verb_FunctionName_Action(underscore separators), e.g.Get_Database_ConnectingToDatabaseString Format
ConvertFrom-StringData @' KeyName = Message with {0} placeholder. (PREFIX0001) '@String IDs
- Format:
(PREFIX####)- PREFIX: First letter of each word in class or function name (SqlSetup → SS, Get-SqlDscDatabase → GSDD)
- Number: Sequential from 0001
Usage
Write-Verbose -Message ($script:localizedData.KeyName -f $value1)
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
source/Public/*.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines.instructions.md)
Public commands should be located in
source/Public/{CommandName}.ps1
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
**/*.{ps1,psm1,psd1}
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-powershell.instructions.md)
**/*.{ps1,psm1,psd1}: Use descriptive names (3+ characters, no abbreviations) for functions, parameters, variables, and classes
Functions: Use PascalCase with Verb-Noun format using approved verbs
Parameters: Use PascalCase naming
Variables: Use camelCase naming
Keywords: Use lower-case
Classes: Use PascalCase naming
Include scope for script/global/environment variables:$script:,$global:,$env:
Use 4 spaces for indentation (no tabs)
Use one space around operators:$a = 1 + 2
Use one space between type and variable:[String] $name
Use one space between keyword and parenthesis:if ($condition)
No spaces on empty lines
Limit lines to 120 characters
Place newline before opening brace (except variable assignments)
Place one newline after opening brace
Place two newlines after closing brace (one if followed by another brace or continuation)
Use single quotes unless variable expansion is needed:'text'vs"text $variable"
For single-line arrays use:@('one', 'two', 'three')
For multi-line arrays: place each element on separate line with proper indentation
Do not use the unary comma operator (,) in return statements to force an array
For empty hashtables use:@{}
For hashtables: place each property on separate line with proper indentation and use PascalCase for property names
Single-line comments: use# Commentformat (capitalized, on own line)
Multi-line comments: use<# Comment #>format (opening and closing brackets on own line with indented text)
No commented-out code
Always add comment-based help to all functions and scripts with SYNOPSIS, DESCRIPTION (40+ chars), PARAMETER, and EXAMPLE sections before function/class
Comment-based help indentation: keywords 4 spaces, text 8 spaces
Include examples in comment-based help for all parameter sets and combinations
INPUTS section in comment-based help: List each pipeline-accepted type as inline code with a 1-line description, repeat keyword for each input type, specifyNone.if there are no inp...
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
**/Public/**/*.ps1
📄 CodeRabbit inference engine (.github/instructions/SqlServerDsc-guidelines.instructions.md)
Public commands must follow the naming format
{Verb}-SqlDsc{Noun}
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
**
⚙️ CodeRabbit configuration file
**: # DSC Community GuidelinesTerminology
- Command: Public command
- Function: Private function
- Resource: DSC class-based resource
Build & Test Workflow Requirements
- Run PowerShell script files from repository root
- Setup build and test environment (once per
pwshsession):./build.ps1 -Tasks noop- Build project before running tests:
./build.ps1 -Tasks build- Always run tests in new
pwshsession:Invoke-Pester -Path @({test paths}) -Output DetailedFile Organization
- Public commands:
source/Public/{CommandName}.ps1- Private functions:
source/Private/{FunctionName}.ps1- Classes:
source/Classes/{DependencyGroupNumber}.{ClassName}.ps1- Enums:
source/Enum/{DependencyGroupNumber}.{EnumName}.ps1- Unit tests:
tests/Unit/{Classes|Public|Private}/{Name}.Tests.ps1- Integration tests:
tests/Integration/Commands/{CommandName}.Integration.Tests.ps1Requirements
- Follow instructions over existing code patterns
- Follow PowerShell style and test guideline instructions strictly
- Always update CHANGELOG.md Unreleased section
- Localize all strings using string keys; remove any orphaned string keys
- Check DscResource.Common before creating private functions
- Separate reusable logic into private functions
- DSC resources should always be created as class-based resources
- Add unit tests for all commands/functions/resources
- Add integration tests for all public commands and resources
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
{**/*.ps1,**/*.psm1,**/*.psd1}
⚙️ CodeRabbit configuration file
{**/*.ps1,**/*.psm1,**/*.psd1}: # PowerShell GuidelinesNaming
- Use descriptive names (3+ characters, no abbreviations)
- Functions: PascalCase with Verb-Noun format using approved verbs
- Parameters: PascalCase
- Variables: camelCase
- Keywords: lower-case
- Classes: PascalCase
- Include scope for script/global/environment variables:
$script:,$global:,$env:File naming
- Class files:
###.ClassName.ps1format (e.g.001.SqlReason.ps1,004.StartupParameters.ps1)Formatting
Indentation & Spacing
- Use 4 spaces (no tabs)
- One space around operators:
$a = 1 + 2- One space between type and variable:
[String] $name- One space between keyword and parenthesis:
if ($condition)- No spaces on empty lines
- Try to limit lines to 120 characters
Braces
- Newline before opening brace (except variable assignments)
- One newline after opening brace
- Two newlines after closing brace (one if followed by another brace or continuation)
Quotes
- Use single quotes unless variable expansion is needed:
'text'vs"text $variable"Arrays
- Single line:
@('one', 'two', 'three')- Multi-line: each element on separate line with proper indentation
- Do not use the unary comma operator (
,) in return statements to force
an arrayHashtables
- Empty:
@{}- Each property on separate line with proper indentation
- Properties: Use PascalCase
Comments
- Single line:
# Comment(capitalized, on own line)- Multi-line:
<# Comment #>format (opening and closing brackets on own line), and indent text- No commented-out code
Comment-based help
- Always add comment-based help to all functions and scripts
- Comment-based help: SYNOPSIS, DESCRIPTION (40+ chars), PARAMETER, EXAMPLE sections before function/class
- Comment-based help indentation: keywords 4 spaces, text 8 spaces
- Include examples for all parameter sets and combinations
- INPUTS: List each pipeline‑accepted type as inline code with a 1‑line description...
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
**/*.[Tt]ests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-pester.instructions.md)
**/*.[Tt]ests.ps1: All public commands, private functions and classes must have unit tests
All public commands and class-based resources must have integration tests
Use Pester v5 syntax only
Test code only insideDescribeblocks
Assertions only inItblocks
Never test verbose messages, debug messages or parameter binding behavior
Pass all mandatory parameters to avoid prompts
InsideItblocks, assign unused return objects to$null(unless part of pipeline)
Tested entity must be called from within theItblocks
Keep results and assertions in sameItblock
Avoid try-catch-finally for cleanup, useAfterAllorAfterEach
Avoid unnecessary remove/recreate cycles
OneDescribeblock per file matching the tested entity name
Contextdescriptions start with 'When'
Itdescriptions start with 'Should', must not contain 'when'
Mock variables prefix: 'mock'
Public commands: Never useInModuleScope(unless retrieving localized strings or creating an object using an internal class)
Private functions/class resources: Always useInModuleScope
Each class method = separateContextblock
Each scenario = separateContextblock
Use nestedContextblocks for complex scenarios
Mocking inBeforeAll(BeforeEachonly when required)
Setup/teardown inBeforeAll,BeforeEach/AfterAll,AfterEachclose to usage
Spacing between blocks, arrange, act, and assert for readability
PascalCase:Describe,Context,It,Should,BeforeAll,BeforeEach,AfterAll,AfterEach
Use-BeTrue/-BeFalsenever-Be $true/-Be $false
Never useAssert-MockCalled, useShould -Invokeinstead
NoShould -Not -Throw- invoke commands directly
Never add an empty-MockWithblock
Omit-MockWithwhen returning$null
Set$PSDefaultParameterValuesforMock:ModuleName,Should:ModuleName,InModuleScope:ModuleName
Omit-ModuleNameparameter on Pester commands
Never useMockinsideInModuleScope-block
Never useparam()inside-MockWithscriptblock...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
⚙️ CodeRabbit configuration file
**/*.[Tt]ests.ps1: # Tests GuidelinesCore Requirements
- All public commands, private functions and classes must have unit tests
- All public commands and class-based resources must have integration tests
- Use Pester v5 syntax only
- Test code only inside
Describeblocks- Assertions only in
Itblocks- Never test verbose messages, debug messages or parameter binding behavior
- Pass all mandatory parameters to avoid prompts
Requirements
- Inside
Itblocks, assign unused return objects to$null(unless part of pipeline)- Tested entity must be called from within the
Itblocks- Keep results and assertions in same
Itblock- Avoid try-catch-finally for cleanup, use
AfterAllorAfterEach- Avoid unnecessary remove/recreate cycles
Naming
- One
Describeblock per file matching the tested entity nameContextdescriptions start with 'When'Itdescriptions start with 'Should', must not contain 'when'- Mock variables prefix: 'mock'
Structure & Scope
- Public commands: Never use
InModuleScope(unless retrieving localized strings or creating an object using an internal class)- Private functions/class resources: Always use
InModuleScope- Each class method = separate
Contextblock- Each scenario = separate
Contextblock- Use nested
Contextblocks for complex scenarios- Mocking in
BeforeAll(BeforeEachonly when required)- Setup/teardown in
BeforeAll,BeforeEach/AfterAll,AfterEachclose to usage- Spacing between blocks, arrange, act, and assert for readability
Syntax Rules
- PascalCase:
Describe,Context,It,Should,BeforeAll,BeforeEach,AfterAll,AfterEach- Use
-BeTrue/-BeFalsenever-Be $true/-Be $false- Never use
Assert-MockCalled, useShould -Invokeinstead- No
Should -Not -Throw- invoke commands directly- Never add an empty
-MockWithblock- Omit
-MockWithwhen returning$null- Set
$PSDefaultParameterValuesforMock:ModuleName,Should:ModuleName, `...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
tests/Unit/Public/*.[Tt]ests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-pester.instructions.md)
Public commands:
tests/Unit/Public/{Name}.Tests.ps1
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
tests/Unit/**/*.Tests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines.instructions.md)
Unit tests should be located in
tests/Unit/{Classes|Public|Private}/{Name}.Tests.ps1
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
tests/[Uu]nit/**/*.[Tt]ests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md)
tests/[Uu]nit/**/*.[Tt]ests.ps1: Test with localized strings usingInModuleScope -ScriptBlock { $script:localizedData.Key }in Pester unit tests
Mock files using the$TestDrivevariable (path to the test drive) in Pester unit tests
All public commands require parameter set validation tests in unit tests
Use the exact Pester test setup block withBeforeDiscovery,BeforeAll, andAfterAllblocks beforeDescribein unit tests, includingDscResource.Testmodule import and PSDefaultParameterValues configuration
Use parameter set validation test template withGet-CommandandParameterSetsproperty, supporting both single and multiple parameter sets via-ForEacharray in Pester unit tests
Use parameter properties test template withGet-Commandto validate individual parameter attributes (e.g., Mandatory flag) in Pester unit tests
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
⚙️ CodeRabbit configuration file
tests/[Uu]nit/**/*.[Tt]ests.ps1: # Unit Tests Guidelines
- Test with localized strings: Use
InModuleScope -ScriptBlock { $script:localizedData.Key }- Mock files: Use
$TestDrivevariable (path to the test drive)- All public commands require parameter set validation tests
- After modifying classes, always run tests in new session (for changes to take effect)
Test Setup Requirements
Use this exact setup block before
Describe:[System.Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '', Justification = 'Suppressing this rule because Script Analyzer does not understand Pester syntax.')] param () BeforeDiscovery { try { if (-not (Get-Module -Name 'DscResource.Test')) { # Assumes dependencies have been resolved, so if this module is not available, run 'noop' task. if (-not (Get-Module -Name 'DscResource.Test' -ListAvailable)) { # Redirect all streams to $null, except the error stream (stream 2) & "$PSScriptRoot/../../../build.ps1" -Tasks 'noop' 3>&1 4>&1 5>&1 6>&1 > $null } # If the dependencies have not been resolved, this will throw an error. Import-Module -Name 'DscResource.Test' -Force -ErrorAction 'Stop' } } catch [System.IO.FileNotFoundException] { throw 'DscResource.Test module dependency not found. Please run ".\build.ps1 -ResolveDependency -Tasks noop" first.' } } BeforeAll { $script:moduleName = '{MyModuleName}' Import-Module -Name $script:moduleName -ErrorAction 'Stop' $PSDefaultParameterValues['InModuleScope:ModuleName'] = $script:moduleName $PSDefaultParameterValues['Mock:ModuleName'] = $script:moduleName $PSDefaultParameterValues['Should:ModuleName'] = $script:moduleName } AfterAll { $PSDefaultParameterValues.Remove('InModuleScope:ModuleName') $PSDefaultParameterValues.Remove('Mock:ModuleName') ...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
**/tests/Unit/**/*.ps1
📄 CodeRabbit inference engine (.github/instructions/SqlServerDsc-guidelines.instructions.md)
**/tests/Unit/**/*.ps1: Unit tests must use SMO stub types from SMO.cs, never mock SMO types
Unit tests must add$env:SqlServerDscCI = $trueinBeforeAllblock and remove inAfterAllblock
Load SMO stub types from SMO.cs in unit test files usingAdd-Type -Path "$PSScriptRoot/../Stubs/SMO.cs"
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
tests/Integration/Commands/*.Integration.Tests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines.instructions.md)
Integration tests for commands should be located in
tests/Integration/Commands/{CommandName}.Integration.Tests.ps1Location for command integration tests:
tests/Integration/Commands/{CommandName}.Integration.Tests.ps1
Files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md)
tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1: Integration tests must use real environment only - no mocking allowed
Integration tests must cover all scenarios and code paths
UseGet-ComputerNamefor computer names in CI environments within integration tests
Avoid usingExpectedMessageparameter forShould -Throwassertions in integration tests
Call commands with-Forceparameter where applicable in integration tests to avoid prompting
Use-ErrorAction 'Stop'on commands in integration tests so failures surface immediately
Integration test files must include the required setup block with SuppressMessageAttribute, BeforeDiscovery block for DscResource.Test module import, and BeforeAll block for module initialization
Files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
⚙️ CodeRabbit configuration file
tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1: # Integration Tests GuidelinesRequirements
- Location Commands:
tests/Integration/Commands/{CommandName}.Integration.Tests.ps1- Location Resources:
tests/Integration/Resources/{ResourceName}.Integration.Tests.ps1- No mocking - real environment only
- Cover all scenarios and code paths
- Use
Get-ComputerNamefor computer names in CI- Avoid
ExpectedMessageforShould -Throwassertions- Only run integration tests in CI unless explicitly instructed.
- Call commands with
-Forceparameter where applicable (avoids prompting).- Use
-ErrorAction 'Stop'on commands so failures surface immediatelyRequired Setup Block
[System.Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '', Justification = 'Suppressing this rule because Script Analyzer does not understand Pester syntax.')] param () BeforeDiscovery { try { if (-not (Get-Module -Name 'DscResource.Test')) { # Assumes dependencies have been resolved, so if this module is not available, run 'noop' task. if (-not (Get-Module -Name 'DscResource.Test' -ListAvailable)) { # Redirect all streams to $null, except the error stream (stream 2) & "$PSScriptRoot/../../../build.ps1" -Tasks 'noop' 3>&1 4>&1 5>&1 6>&1 > $null } # If the dependencies have not been resolved, this will throw an error. Import-Module -Name 'DscResource.Test' -Force -ErrorAction 'Stop' } } catch [System.IO.FileNotFoundException] { throw 'DscResource.Test module dependency not found. Please run ".\build.ps1 -ResolveDependency -Tasks noop" first.' } } BeforeAll { $script:moduleName = '{MyModuleName}' Import-Module -Name $script:moduleName -ErrorAction 'Stop' }
Files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
**/tests/Integration/**/*.ps1
📄 CodeRabbit inference engine (.github/instructions/SqlServerDsc-guidelines.instructions.md)
**/tests/Integration/**/*.ps1: Integration tests must useConnect-SqlDscDatabaseEnginefor SQL Server DB session with correct CI credentials
Integration tests must useDisconnect-SqlDscDatabaseEngineafterConnect-SqlDscDatabaseEngine
Files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
🧠 Learnings (51)
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : Use `PSCredential` for credentials
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:58:20.404Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-class-resource.instructions.md:0-0
Timestamp: 2025-11-27T17:58:20.404Z
Learning: Applies to source/[cC]lasses/**/*.ps1 : DSC class-based resources must be decorated with `[DscResource(RunAsCredential = 'Optional')]` or `[DscResource(RunAsCredential = 'Mandatory')]` based on requirements
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2026-01-01T11:57:15.298Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/SqlServerDsc-guidelines.instructions.md:0-0
Timestamp: 2026-01-01T11:57:15.298Z
Learning: Applies to **/tests/Integration/**/*.ps1 : Integration tests must use `Connect-SqlDscDatabaseEngine` for SQL Server DB session with correct CI credentials
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2026-01-15T17:58:20.966Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2410
File: source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1:115-125
Timestamp: 2026-01-15T17:58:20.966Z
Learning: In public functions under source/Public, use New-Exception and New-ErrorRecord for error handling. Do not use New-InvalidOperationException here; the New-*Exception helpers are intended for class-based resources under source/Classes/**/*.ps1. For public scripts, prefer creating standard exception objects or ErrorRecord via New-ErrorRecord to maintain consistent error reporting across public functions.
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-InvalidOperationException` for invalid operation errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : For error handling, use `New-ErrorRecord` instead of `[System.Management.Automation.ErrorRecord]::new(...)`
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-09-28T13:49:31.541Z
Learnt from: dan-hughes
Repo: dsccommunity/DhcpServerDsc PR: 96
File: source/Modules/DhcpServerDsc.Common/Public/Get-ValidTimeSpan.ps1:36-39
Timestamp: 2025-09-28T13:49:31.541Z
Learning: In DSC Community guidelines, ErrorId parameters in New-TerminatingError calls are identifier strings that do not need localization - only the ErrorMessage parameter should use localized strings from $script:localizedData.
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-InvalidDataException` for invalid data errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-InvalidResultException` for invalid result errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : Use `Write-Error` for non-terminating errors with `-Message` (localized string), `-Category` (relevant error category), `-ErrorId` (unique ID), and `-TargetObject` (object causing error)
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : Use `$PSCmdlet.ThrowTerminatingError()` for terminating errors (except for classes), use relevant error category, in try-catch include exception with localized message
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:58:20.404Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-class-resource.instructions.md:0-0
Timestamp: 2025-11-27T17:58:20.404Z
Learning: Applies to source/[cC]lasses/**/*.ps1 : DSC class-based resources must use `New-*Exception` commands (such as `New-InvalidDataException`, `New-ArgumentException`, `New-InvalidOperationException`, `New-ObjectNotFoundException`, `New-InvalidResultException`, `New-NotImplementedException`) instead of `throw` for terminating errors in classes
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-08-17T10:48:15.384Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2136
File: source/suffix.ps1:24-24
Timestamp: 2025-08-17T10:48:15.384Z
Learning: In source/suffix.ps1, the Write-Verbose message in the catch block for Import-SqlDscPreferredModule does not need localization because the exception message from Import-SqlDscPreferredModule is already localized by that command, making it an edge case exception to the localization guidelines.
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2026-01-01T11:57:15.298Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/SqlServerDsc-guidelines.instructions.md:0-0
Timestamp: 2026-01-01T11:57:15.298Z
Learning: Applies to **/tests/Unit/**/*.ps1 : Unit tests must add `$env:SqlServerDscCI = $true` in `BeforeAll` block and remove in `AfterAll` block
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:36.079Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:36.079Z
Learning: Applies to tests/[Uu]nit/**/*.[Tt]ests.ps1 : Use the exact Pester test setup block with `BeforeDiscovery`, `BeforeAll`, and `AfterAll` blocks before `Describe` in unit tests, including `DscResource.Test` module import and PSDefaultParameterValues configuration
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to tests/Unit/Public/*.[Tt]ests.ps1 : Public commands: `tests/Unit/Public/{Name}.Tests.ps1`
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2026-01-01T11:57:15.298Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/SqlServerDsc-guidelines.instructions.md:0-0
Timestamp: 2026-01-01T11:57:15.298Z
Learning: Applies to **/tests/Integration/**/*.ps1 : Integration tests must use `Disconnect-SqlDscDatabaseEngine` after `Connect-SqlDscDatabaseEngine`
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Mocking in `BeforeAll` (`BeforeEach` only when required)
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:36.079Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:36.079Z
Learning: Applies to tests/[Uu]nit/**/*.[Tt]ests.ps1 : Use parameter properties test template with `Get-Command` to validate individual parameter attributes (e.g., Mandatory flag) in Pester unit tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:36.079Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:36.079Z
Learning: Applies to tests/[Uu]nit/**/*.[Tt]ests.ps1 : All public commands require parameter set validation tests in unit tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : All public commands, private functions and classes must have unit tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to tests/Unit/Private/*.[Tt]ests.ps1 : Private functions: `tests/Unit/Private/{Name}.Tests.ps1`
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1 : Integration test files must include the required setup block with SuppressMessageAttribute, BeforeDiscovery block for DscResource.Test module import, and BeforeAll block for module initialization
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:36.079Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:36.079Z
Learning: Applies to tests/[Uu]nit/**/*.[Tt]ests.ps1 : Use parameter set validation test template with `Get-Command` and `ParameterSets` property, supporting both single and multiple parameter sets via `-ForEach` array in Pester unit tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T18:56:46.759Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 1622
File: tests/Integration/DSC_SqlDatabase.Integration.Tests.ps1:1-30
Timestamp: 2025-11-27T18:56:46.759Z
Learning: Integration tests for MOF-based DSC resources (located in source/DSCResources/**) should use the Initialize-TestEnvironment pattern with -ResourceType 'Mof', not the BeforeDiscovery/BeforeAll pattern. The BeforeDiscovery/BeforeAll pattern is for class-based resources only.
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Use `$PSDefaultParameterValues` only for Pester commands (`Describe`, `Context`, `It`, `Mock`, `Should`, `InModuleScope`)
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : For state-changing functions, use `SupportsShouldProcess` attribute with `ConfirmImpact` set to 'Low', 'Medium', or 'High' depending on risk
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : Include a `Force` parameter for functions that use `$PSCmdlet.ShouldContinue` or `$PSCmdlet.ShouldProcess`
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-10T20:07:45.822Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2367
File: source/en-US/SqlServerDsc.strings.psd1:489-498
Timestamp: 2025-12-10T20:07:45.822Z
Learning: In SqlServerDsc (and DSC Community modules), localization string error codes may have gaps in their sequential numbering (e.g., RSDD0001, RSDD0003) when strings are removed over time. Never suggest renumbering localization keys to make them sequential. QA tests safeguard against missing or extra localization string keys.
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : In catch blocks with `Write-Error`, pass original exception using `-Exception` and always use `return` after `Write-Error` to avoid further processing
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : For error handling, use `New-Exception` instead of `[System.Exception]::new(...)`
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-NotImplementedException` for not implemented errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-ArgumentException` for argument-related errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-ObjectNotFoundException` for object not found errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : All public commands and class-based resources must have integration tests
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/Integration/Resources/*.Integration.Tests.ps1 : Location for resource integration tests: `tests/Integration/Resources/{ResourceName}.Integration.Tests.ps1`
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1 : Call commands with `-Force` parameter where applicable in integration tests to avoid prompting
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/Integration/Commands/*.Integration.Tests.ps1 : Location for command integration tests: `tests/Integration/Commands/{CommandName}.Integration.Tests.ps1`
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T18:00:35.078Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines.instructions.md:0-0
Timestamp: 2025-11-27T18:00:35.078Z
Learning: Applies to tests/Integration/Commands/*.Integration.Tests.ps1 : Integration tests for commands should be located in `tests/Integration/Commands/{CommandName}.Integration.Tests.ps1`
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Define `-ForEach` variables in `BeforeDiscovery` (close to usage)
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-08-10T15:11:52.897Z
Learnt from: dan-hughes
Repo: dsccommunity/ActiveDirectoryDsc PR: 741
File: azure-pipelines.yml:104-104
Timestamp: 2025-08-10T15:11:52.897Z
Learning: In the ActiveDirectoryDsc project, HQRM (High Quality Resource Module) tests must run in PowerShell 5 (Windows PowerShell) using `pwsh: false` in the Azure Pipelines configuration, while unit tests can run in PowerShell 7 (PowerShell Core) with `pwsh: true`. This differentiation is intentional due to HQRM's specific requirements and dependencies on Windows PowerShell.
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-10-10T14:01:42.703Z
Learnt from: dan-hughes
Repo: dsccommunity/UpdateServicesDsc PR: 86
File: tests/Unit/MSFT_UpdateServicesServer.Tests.ps1:6-45
Timestamp: 2025-10-10T14:01:42.703Z
Learning: For script-based (MOF) DSC resources in UpdateServicesDsc, unit tests should use Initialize-TestEnvironment with variables $script:dscModuleName and $script:dscResourceName, and set -ResourceType 'Mof'. This differs from class-based resource tests which use the simpler $script:moduleName template without Initialize-TestEnvironment.
Applied to files:
tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1 : Use `-ErrorAction 'Stop'` on commands in integration tests so failures surface immediately
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1 : Integration tests must cover all scenarios and code paths
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Keep results and assertions in same `It` block
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Assertions only in `It` blocks
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Use nested `Context` blocks for complex scenarios
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Tested entity must be called from within the `It` blocks
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : `-ForEach` allowed on `Context` and `It` blocks
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-10-11T08:18:26.062Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2300
File: tests/Unit/DSC_SqlAGDatabase.Tests.ps1:22-22
Timestamp: 2025-10-11T08:18:26.062Z
Learning: In unit test files (tests/[Uu]nit/**/*.[Tt]ests.ps1), when DscResource.Test module dependency is not found during BeforeDiscovery setup, the error message should instruct users to run ".\build.ps1 -Tasks noop" (not "build") because the noop task is designed for quick test environment setup. The build task is more extensive and unnecessary when tests run in a separate process, as the module should already be built before running tests.
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Avoid unnecessary remove/recreate cycles
Applied to files:
tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (3)
- GitHub Check: dsccommunity.SqlServerDsc (Build Package Module)
- GitHub Check: PSScriptAnalyzer
- GitHub Check: PSScriptAnalyzer
🔇 Additional comments (7)
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1 (2)
79-101: LGTM! Well-structured public command declaration.The function follows the correct naming convention (
Set-SqlDsc{Noun}), includes properCmdletBindingwithSupportsShouldProcessandConfirmImpact = 'Medium', and correctly declares theOutputType. TheForceparameter is appropriately included for bypassing confirmation.
139-152: Error handling and secure memory cleanup look correct.The error handling now properly uses
New-ExceptionandNew-ErrorRecordfor public functions (per learnings). Thefinallyblock correctly zeroes the BSTR memory to prevent password exposure. This addresses the past review feedback.source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1 (1)
69-87: LGTM! Public command follows conventions.The function declaration properly follows the
Remove-SqlDsc{Noun}naming convention with appropriateCmdletBindingattributes and parameter definitions.tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1 (1)
1-44: LGTM! Test setup follows guidelines.The test file includes the required setup block with
BeforeDiscovery,BeforeAll(with$env:SqlServerDscCI = $true), andAfterAll(removing the environment variable). PSDefaultParameterValues are correctly configured.tests/Integration/Commands/Remove-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1 (2)
40-49: LGTM! Test context now includes the It block.The
Integration_SQL2017_RScontext now correctly includes anItblock that tests the removal operation. This addresses the past review feedback about the missing test.
34-80: Integration tests follow guidelines.The test file correctly uses
-Forceto avoid prompts and-ErrorAction 'Stop'to surface failures immediately. The setup block follows the required pattern, and all four contexts (SQL2017_RS, SQL2019_RS, SQL2022_RS, PowerBI) are properly structured.tests/Integration/Commands/Set-SqlDscRSUnattendedExecutionAccount.Integration.Tests.ps1 (1)
34-47: LGTM! Integration test structure is correct.The test uses
Get-ComputerNamefor CI environment compatibility,-Forceto avoid prompts, and-ErrorAction 'Stop'to surface failures. WhileConvertTo-SecureString -AsPlainTextis used, this is acceptable in test code (the guideline applies to production code).
✏️ Tip: You can disable this entire section by setting review_details to false in your review settings.
…and Set-SqlDscRSUnattendedExecutionAccount for consistency; update test cases to reflect new error IDs.
There was a problem hiding this comment.
Actionable comments posted: 2
🤖 Fix all issues with AI agents
In `@source/en-US/SqlServerDsc.strings.psd1`:
- Around line 914-920: The failed-message string ID for
Set-SqlDscRSUnattendedExecutionAccount uses the incorrect prefix "(RSSUEA0001)";
update it to use the correct prefix "(SSRSUEA0001)" to match the function name
convention (S=Set, S=Sql, RS, UEA=UnattendedExecutionAccount) — specifically
change the suffix in Set_SqlDscRSUnattendedExecutionAccount_FailedToSet from
RSSUEA0001 to SSRSUEA0001 so it aligns with other entries (e.g.,
Remove-SqlDscRSUnattendedExecutionAccount uses RSRSUEA).
In `@source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1`:
- Around line 139-148: The catch block creates an error record with ErrorId
'SSRSUEA0001' which doesn't match the localized string suffix '(RSSUEA0001)';
update the ErrorId used in the New-ErrorRecord call (where $exception is created
and $errorRecord is assigned) from 'SSRSUEA0001' to 'RSSUEA0001' so the ErrorId
and localized string suffix are consistent before calling
$PSCmdlet.ThrowTerminatingError($errorRecord).
🧹 Nitpick comments (1)
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1 (1)
107-121: Consider adding-ParameterFilterfor completeness.The Force parameter test verifies invocation count but doesn't validate that the correct method is called. For consistency with the test at lines 78-80, consider adding the parameter filter.
♻️ Suggested improvement
It 'Should remove unattended execution account without confirmation' { $mockCimInstance | Remove-SqlDscRSUnattendedExecutionAccount -Force - Should -Invoke -CommandName Invoke-RsCimMethod -Exactly -Times 1 + Should -Invoke -CommandName Invoke-RsCimMethod -ParameterFilter { + $MethodName -eq 'RemoveUnattendedExecutionAccount' + } -Exactly -Times 1 }
📜 Review details
Configuration used: Organization UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (5)
source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1source/en-US/SqlServerDsc.strings.psd1tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1tests/Unit/Public/Set-SqlDscRSUnattendedExecutionAccount.Tests.ps1
🚧 Files skipped from review as they are similar to previous changes (2)
- tests/Unit/Public/Set-SqlDscRSUnattendedExecutionAccount.Tests.ps1
- source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1
🧰 Additional context used
📓 Path-based instructions (13)
**/*.[Tt]ests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-pester.instructions.md)
**/*.[Tt]ests.ps1: All public commands, private functions and classes must have unit tests
All public commands and class-based resources must have integration tests
Use Pester v5 syntax only
Test code only insideDescribeblocks
Assertions only inItblocks
Never test verbose messages, debug messages or parameter binding behavior
Pass all mandatory parameters to avoid prompts
InsideItblocks, assign unused return objects to$null(unless part of pipeline)
Tested entity must be called from within theItblocks
Keep results and assertions in sameItblock
Avoid try-catch-finally for cleanup, useAfterAllorAfterEach
Avoid unnecessary remove/recreate cycles
OneDescribeblock per file matching the tested entity name
Contextdescriptions start with 'When'
Itdescriptions start with 'Should', must not contain 'when'
Mock variables prefix: 'mock'
Public commands: Never useInModuleScope(unless retrieving localized strings or creating an object using an internal class)
Private functions/class resources: Always useInModuleScope
Each class method = separateContextblock
Each scenario = separateContextblock
Use nestedContextblocks for complex scenarios
Mocking inBeforeAll(BeforeEachonly when required)
Setup/teardown inBeforeAll,BeforeEach/AfterAll,AfterEachclose to usage
Spacing between blocks, arrange, act, and assert for readability
PascalCase:Describe,Context,It,Should,BeforeAll,BeforeEach,AfterAll,AfterEach
Use-BeTrue/-BeFalsenever-Be $true/-Be $false
Never useAssert-MockCalled, useShould -Invokeinstead
NoShould -Not -Throw- invoke commands directly
Never add an empty-MockWithblock
Omit-MockWithwhen returning$null
Set$PSDefaultParameterValuesforMock:ModuleName,Should:ModuleName,InModuleScope:ModuleName
Omit-ModuleNameparameter on Pester commands
Never useMockinsideInModuleScope-block
Never useparam()inside-MockWithscriptblock...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
⚙️ CodeRabbit configuration file
**/*.[Tt]ests.ps1: # Tests GuidelinesCore Requirements
- All public commands, private functions and classes must have unit tests
- All public commands and class-based resources must have integration tests
- Use Pester v5 syntax only
- Test code only inside
Describeblocks- Assertions only in
Itblocks- Never test verbose messages, debug messages or parameter binding behavior
- Pass all mandatory parameters to avoid prompts
Requirements
- Inside
Itblocks, assign unused return objects to$null(unless part of pipeline)- Tested entity must be called from within the
Itblocks- Keep results and assertions in same
Itblock- Avoid try-catch-finally for cleanup, use
AfterAllorAfterEach- Avoid unnecessary remove/recreate cycles
Naming
- One
Describeblock per file matching the tested entity nameContextdescriptions start with 'When'Itdescriptions start with 'Should', must not contain 'when'- Mock variables prefix: 'mock'
Structure & Scope
- Public commands: Never use
InModuleScope(unless retrieving localized strings or creating an object using an internal class)- Private functions/class resources: Always use
InModuleScope- Each class method = separate
Contextblock- Each scenario = separate
Contextblock- Use nested
Contextblocks for complex scenarios- Mocking in
BeforeAll(BeforeEachonly when required)- Setup/teardown in
BeforeAll,BeforeEach/AfterAll,AfterEachclose to usage- Spacing between blocks, arrange, act, and assert for readability
Syntax Rules
- PascalCase:
Describe,Context,It,Should,BeforeAll,BeforeEach,AfterAll,AfterEach- Use
-BeTrue/-BeFalsenever-Be $true/-Be $false- Never use
Assert-MockCalled, useShould -Invokeinstead- No
Should -Not -Throw- invoke commands directly- Never add an empty
-MockWithblock- Omit
-MockWithwhen returning$null- Set
$PSDefaultParameterValuesforMock:ModuleName,Should:ModuleName, `...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
tests/Unit/Public/*.[Tt]ests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-pester.instructions.md)
Public commands:
tests/Unit/Public/{Name}.Tests.ps1
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
tests/Unit/**/*.Tests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines.instructions.md)
Unit tests should be located in
tests/Unit/{Classes|Public|Private}/{Name}.Tests.ps1
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
**/*.{ps1,psm1,psd1}
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-powershell.instructions.md)
**/*.{ps1,psm1,psd1}: Use descriptive names (3+ characters, no abbreviations) for functions, parameters, variables, and classes
Functions: Use PascalCase with Verb-Noun format using approved verbs
Parameters: Use PascalCase naming
Variables: Use camelCase naming
Keywords: Use lower-case
Classes: Use PascalCase naming
Include scope for script/global/environment variables:$script:,$global:,$env:
Use 4 spaces for indentation (no tabs)
Use one space around operators:$a = 1 + 2
Use one space between type and variable:[String] $name
Use one space between keyword and parenthesis:if ($condition)
No spaces on empty lines
Limit lines to 120 characters
Place newline before opening brace (except variable assignments)
Place one newline after opening brace
Place two newlines after closing brace (one if followed by another brace or continuation)
Use single quotes unless variable expansion is needed:'text'vs"text $variable"
For single-line arrays use:@('one', 'two', 'three')
For multi-line arrays: place each element on separate line with proper indentation
Do not use the unary comma operator (,) in return statements to force an array
For empty hashtables use:@{}
For hashtables: place each property on separate line with proper indentation and use PascalCase for property names
Single-line comments: use# Commentformat (capitalized, on own line)
Multi-line comments: use<# Comment #>format (opening and closing brackets on own line with indented text)
No commented-out code
Always add comment-based help to all functions and scripts with SYNOPSIS, DESCRIPTION (40+ chars), PARAMETER, and EXAMPLE sections before function/class
Comment-based help indentation: keywords 4 spaces, text 8 spaces
Include examples in comment-based help for all parameter sets and combinations
INPUTS section in comment-based help: List each pipeline-accepted type as inline code with a 1-line description, repeat keyword for each input type, specifyNone.if there are no inp...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/en-US/SqlServerDsc.strings.psd1source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
tests/[Uu]nit/**/*.[Tt]ests.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md)
tests/[Uu]nit/**/*.[Tt]ests.ps1: Test with localized strings usingInModuleScope -ScriptBlock { $script:localizedData.Key }in Pester unit tests
Mock files using the$TestDrivevariable (path to the test drive) in Pester unit tests
All public commands require parameter set validation tests in unit tests
Use the exact Pester test setup block withBeforeDiscovery,BeforeAll, andAfterAllblocks beforeDescribein unit tests, includingDscResource.Testmodule import and PSDefaultParameterValues configuration
Use parameter set validation test template withGet-CommandandParameterSetsproperty, supporting both single and multiple parameter sets via-ForEacharray in Pester unit tests
Use parameter properties test template withGet-Commandto validate individual parameter attributes (e.g., Mandatory flag) in Pester unit tests
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
⚙️ CodeRabbit configuration file
tests/[Uu]nit/**/*.[Tt]ests.ps1: # Unit Tests Guidelines
- Test with localized strings: Use
InModuleScope -ScriptBlock { $script:localizedData.Key }- Mock files: Use
$TestDrivevariable (path to the test drive)- All public commands require parameter set validation tests
- After modifying classes, always run tests in new session (for changes to take effect)
Test Setup Requirements
Use this exact setup block before
Describe:[System.Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '', Justification = 'Suppressing this rule because Script Analyzer does not understand Pester syntax.')] param () BeforeDiscovery { try { if (-not (Get-Module -Name 'DscResource.Test')) { # Assumes dependencies have been resolved, so if this module is not available, run 'noop' task. if (-not (Get-Module -Name 'DscResource.Test' -ListAvailable)) { # Redirect all streams to $null, except the error stream (stream 2) & "$PSScriptRoot/../../../build.ps1" -Tasks 'noop' 3>&1 4>&1 5>&1 6>&1 > $null } # If the dependencies have not been resolved, this will throw an error. Import-Module -Name 'DscResource.Test' -Force -ErrorAction 'Stop' } } catch [System.IO.FileNotFoundException] { throw 'DscResource.Test module dependency not found. Please run ".\build.ps1 -ResolveDependency -Tasks noop" first.' } } BeforeAll { $script:moduleName = '{MyModuleName}' Import-Module -Name $script:moduleName -ErrorAction 'Stop' $PSDefaultParameterValues['InModuleScope:ModuleName'] = $script:moduleName $PSDefaultParameterValues['Mock:ModuleName'] = $script:moduleName $PSDefaultParameterValues['Should:ModuleName'] = $script:moduleName } AfterAll { $PSDefaultParameterValues.Remove('InModuleScope:ModuleName') $PSDefaultParameterValues.Remove('Mock:ModuleName') ...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
**/Public/**/*.ps1
📄 CodeRabbit inference engine (.github/instructions/SqlServerDsc-guidelines.instructions.md)
Public commands must follow the naming format
{Verb}-SqlDsc{Noun}
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
**/tests/Unit/**/*.ps1
📄 CodeRabbit inference engine (.github/instructions/SqlServerDsc-guidelines.instructions.md)
**/tests/Unit/**/*.ps1: Unit tests must use SMO stub types from SMO.cs, never mock SMO types
Unit tests must add$env:SqlServerDscCI = $trueinBeforeAllblock and remove inAfterAllblock
Load SMO stub types from SMO.cs in unit test files usingAdd-Type -Path "$PSScriptRoot/../Stubs/SMO.cs"
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
**
⚙️ CodeRabbit configuration file
**: # DSC Community GuidelinesTerminology
- Command: Public command
- Function: Private function
- Resource: DSC class-based resource
Build & Test Workflow Requirements
- Run PowerShell script files from repository root
- Setup build and test environment (once per
pwshsession):./build.ps1 -Tasks noop- Build project before running tests:
./build.ps1 -Tasks build- Always run tests in new
pwshsession:Invoke-Pester -Path @({test paths}) -Output DetailedFile Organization
- Public commands:
source/Public/{CommandName}.ps1- Private functions:
source/Private/{FunctionName}.ps1- Classes:
source/Classes/{DependencyGroupNumber}.{ClassName}.ps1- Enums:
source/Enum/{DependencyGroupNumber}.{EnumName}.ps1- Unit tests:
tests/Unit/{Classes|Public|Private}/{Name}.Tests.ps1- Integration tests:
tests/Integration/Commands/{CommandName}.Integration.Tests.ps1Requirements
- Follow instructions over existing code patterns
- Follow PowerShell style and test guideline instructions strictly
- Always update CHANGELOG.md Unreleased section
- Localize all strings using string keys; remove any orphaned string keys
- Check DscResource.Common before creating private functions
- Separate reusable logic into private functions
- DSC resources should always be created as class-based resources
- Add unit tests for all commands/functions/resources
- Add integration tests for all public commands and resources
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/en-US/SqlServerDsc.strings.psd1source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
{**/*.ps1,**/*.psm1,**/*.psd1}
⚙️ CodeRabbit configuration file
{**/*.ps1,**/*.psm1,**/*.psd1}: # PowerShell GuidelinesNaming
- Use descriptive names (3+ characters, no abbreviations)
- Functions: PascalCase with Verb-Noun format using approved verbs
- Parameters: PascalCase
- Variables: camelCase
- Keywords: lower-case
- Classes: PascalCase
- Include scope for script/global/environment variables:
$script:,$global:,$env:File naming
- Class files:
###.ClassName.ps1format (e.g.001.SqlReason.ps1,004.StartupParameters.ps1)Formatting
Indentation & Spacing
- Use 4 spaces (no tabs)
- One space around operators:
$a = 1 + 2- One space between type and variable:
[String] $name- One space between keyword and parenthesis:
if ($condition)- No spaces on empty lines
- Try to limit lines to 120 characters
Braces
- Newline before opening brace (except variable assignments)
- One newline after opening brace
- Two newlines after closing brace (one if followed by another brace or continuation)
Quotes
- Use single quotes unless variable expansion is needed:
'text'vs"text $variable"Arrays
- Single line:
@('one', 'two', 'three')- Multi-line: each element on separate line with proper indentation
- Do not use the unary comma operator (
,) in return statements to force
an arrayHashtables
- Empty:
@{}- Each property on separate line with proper indentation
- Properties: Use PascalCase
Comments
- Single line:
# Comment(capitalized, on own line)- Multi-line:
<# Comment #>format (opening and closing brackets on own line), and indent text- No commented-out code
Comment-based help
- Always add comment-based help to all functions and scripts
- Comment-based help: SYNOPSIS, DESCRIPTION (40+ chars), PARAMETER, EXAMPLE sections before function/class
- Comment-based help indentation: keywords 4 spaces, text 8 spaces
- Include examples for all parameter sets and combinations
- INPUTS: List each pipeline‑accepted type as inline code with a 1‑line description...
Files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/en-US/SqlServerDsc.strings.psd1source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
source/en-US/*.strings.psd1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-localization.instructions.md)
source/en-US/*.strings.psd1: Store command/function localized strings in source/en-US/{MyModuleName}.strings.psd1 files
Store class resource localized strings in source/en-US/{ResourceClassName}.strings.psd1 files
Use Key Naming Pattern format: Verb_FunctionName_Action with underscore separators (e.g., Get_Database_ConnectingToDatabase)
Format localized strings using ConvertFrom-StringData with placeholder syntax: KeyName = Message with {0} placeholder. (PREFIX0001)
Prefix string IDs with an acronym derived from the first letter of each word in the class or function name (e.g., SqlSetup → SS, Get-SqlDscDatabase → GSDD), followed by sequential numbers starting from 0001
Files:
source/en-US/SqlServerDsc.strings.psd1
**/*.psd1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-powershell.instructions.md)
Don't use
NestedModulesfor shared commands withoutRootModulein module manifest
Files:
source/en-US/SqlServerDsc.strings.psd1
source/**/*.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines-localization.instructions.md)
source/**/*.ps1: Localize all Write-Debug, Write-Verbose, Write-Error, Write-Warning and $PSCmdlet.ThrowTerminatingError() messages in PowerShell scripts
Use localized string keys from $script:localizedData, not hardcoded strings, in diagnostic messages
Reference localized strings using the syntax: Write-Verbose -Message ($script:localizedData.KeyName -f $value1)Localize all strings using string keys; remove any orphaned string keys
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
⚙️ CodeRabbit configuration file
source/**/*.ps1: # Localization GuidelinesRequirements
- Localize all Write-Debug, Write-Verbose, Write-Error, Write-Warning and $PSCmdlet.ThrowTerminatingError() messages
- Use localized string keys, not hardcoded strings
- Assume
$script:localizedDatais availableString Files
- Commands/functions:
source/en-US/{MyModuleName}.strings.psd1- Class resources:
source/en-US/{ResourceClassName}.strings.psd1Key Naming Patterns
- Format:
Verb_FunctionName_Action(underscore separators), e.g.Get_Database_ConnectingToDatabaseString Format
ConvertFrom-StringData @' KeyName = Message with {0} placeholder. (PREFIX0001) '@String IDs
- Format:
(PREFIX####)- PREFIX: First letter of each word in class or function name (SqlSetup → SS, Get-SqlDscDatabase → GSDD)
- Number: Sequential from 0001
Usage
Write-Verbose -Message ($script:localizedData.KeyName -f $value1)
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
source/Public/*.ps1
📄 CodeRabbit inference engine (.github/instructions/dsc-community-style-guidelines.instructions.md)
Public commands should be located in
source/Public/{CommandName}.ps1
Files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
🧠 Learnings (42)
📓 Common learnings
Learnt from: dan-hughes
Repo: dsccommunity/UpdateServicesDsc PR: 85
File: source/en-US/UpdateServicesDsc.strings.psd1:1-2
Timestamp: 2025-10-04T21:33:23.022Z
Learning: In UpdateServicesDsc (and similar DSC modules), the module-level localization file (source/en-US/<ModuleName>.strings.psd1) can be empty when DSC resources have their own localization files in source/DSCResources/<ResourceName>/en-US/DSC_<ResourceName>.strings.psd1. Automated tests verify localization completeness for resources. Don't flag empty module-level localization files as issues when resources have separate localization.
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2367
File: source/en-US/SqlServerDsc.strings.psd1:489-498
Timestamp: 2025-12-10T20:07:45.822Z
Learning: In SqlServerDsc (and DSC Community modules), localization string error codes may have gaps in their sequential numbering (e.g., RSDD0001, RSDD0003) when strings are removed over time. Never suggest renumbering localization keys to make them sequential. QA tests safeguard against missing or extra localization string keys.
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use localized strings for all messages including Write-Verbose, Write-Error, and other messaging commands
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use names returned from `Get-UICulture` for additional language folder names in DSC resources
📚 Learning: 2026-01-01T11:57:15.298Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/SqlServerDsc-guidelines.instructions.md:0-0
Timestamp: 2026-01-01T11:57:15.298Z
Learning: Applies to **/tests/Unit/**/*.ps1 : Unit tests must add `$env:SqlServerDscCI = $true` in `BeforeAll` block and remove in `AfterAll` block
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:36.079Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:36.079Z
Learning: Applies to tests/[Uu]nit/**/*.[Tt]ests.ps1 : Use the exact Pester test setup block with `BeforeDiscovery`, `BeforeAll`, and `AfterAll` blocks before `Describe` in unit tests, including `DscResource.Test` module import and PSDefaultParameterValues configuration
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2026-01-01T11:57:15.298Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/SqlServerDsc-guidelines.instructions.md:0-0
Timestamp: 2026-01-01T11:57:15.298Z
Learning: Applies to **/tests/Integration/**/*.ps1 : Integration tests must use `Connect-SqlDscDatabaseEngine` for SQL Server DB session with correct CI credentials
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Avoid unnecessary remove/recreate cycles
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to tests/Unit/Public/*.[Tt]ests.ps1 : Public commands: `tests/Unit/Public/{Name}.Tests.ps1`
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to tests/Unit/Private/*.[Tt]ests.ps1 : Private functions: `tests/Unit/Private/{Name}.Tests.ps1`
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:36.079Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:36.079Z
Learning: Applies to tests/[Uu]nit/**/*.[Tt]ests.ps1 : All public commands require parameter set validation tests in unit tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1 : Integration test files must include the required setup block with SuppressMessageAttribute, BeforeDiscovery block for DscResource.Test module import, and BeforeAll block for module initialization
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2026-01-01T11:57:15.298Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/SqlServerDsc-guidelines.instructions.md:0-0
Timestamp: 2026-01-01T11:57:15.298Z
Learning: Applies to **/tests/Integration/**/*.ps1 : Integration tests must use `Disconnect-SqlDscDatabaseEngine` after `Connect-SqlDscDatabaseEngine`
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : All public commands, private functions and classes must have unit tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-10T20:07:45.822Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2367
File: source/en-US/SqlServerDsc.strings.psd1:489-498
Timestamp: 2025-12-10T20:07:45.822Z
Learning: In SqlServerDsc (and DSC Community modules), localization string error codes may have gaps in their sequential numbering (e.g., RSDD0001, RSDD0003) when strings are removed over time. Never suggest renumbering localization keys to make them sequential. QA tests safeguard against missing or extra localization string keys.
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-08-17T10:13:30.079Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2136
File: source/Public/Remove-SqlDscLogin.ps1:104-108
Timestamp: 2025-08-17T10:13:30.079Z
Learning: In SqlServerDsc unit tests, SMO object stubs (like Login objects) should have properly mocked Parent properties with correct Server stub types and valid InstanceName values, rather than handling null Parent scenarios in production code.
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2026-01-01T11:57:15.298Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/SqlServerDsc-guidelines.instructions.md:0-0
Timestamp: 2026-01-01T11:57:15.298Z
Learning: Applies to **/tests/Unit/**/*.ps1 : Unit tests must use SMO stub types from SMO.cs, never mock SMO types
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1 : Avoid using `ExpectedMessage` parameter for `Should -Throw` assertions in integration tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-08-30T18:18:31.528Z
Learnt from: dan-hughes
Repo: dsccommunity/ActiveDirectoryCSDsc PR: 158
File: source/Classes/020.AdcsOnlineResponder.ps1:0-0
Timestamp: 2025-08-30T18:18:31.528Z
Learning: For ADCS resources in ActiveDirectoryCSDsc, when catching exceptions from Install-Adcs* commands to determine installation state, use string matching on the exception message (e.g., `$_.Exception.ToString() -match 'OnlineResponderSetupException$'`) instead of catching specific exception types. This avoids dependency on importing types that may not be available in all environments like CI systems or DSC authoring machines.
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:25.261Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-integration-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:25.261Z
Learning: Applies to tests/[iI]ntegration/**/*.[iI]ntegration.[tT]ests.ps1 : Use `-ErrorAction 'Stop'` on commands in integration tests so failures surface immediately
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-10-19T10:33:22.772Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2309
File: tests/Integration/Commands/Initialize-SqlDscRebuildDatabase.Integration.Tests.ps1:132-148
Timestamp: 2025-10-19T10:33:22.772Z
Learning: In SqlServerDsc integration tests, when connecting via Connect-SqlDscDatabaseEngine using a local Windows account (e.g., 'SqlAdmin'), use the plain username format without computer/domain prefix. This is Windows Authentication with a local account. The NetBIOS format (e.g., 'COMPUTER\SqlAdmin') is only used for SqlSysAdminAccounts during SQL Server setup/rebuild and will throw an exception if used with Connect-SqlDscDatabaseEngine for local Windows accounts.
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-30T15:15:36.079Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-unit-tests.instructions.md:0-0
Timestamp: 2025-12-30T15:15:36.079Z
Learning: Applies to tests/[Uu]nit/**/*.[Tt]ests.ps1 : Use parameter set validation test template with `Get-Command` and `ParameterSets` property, supporting both single and multiple parameter sets via `-ForEach` array in Pester unit tests
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T18:56:46.759Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 1622
File: tests/Integration/DSC_SqlDatabase.Integration.Tests.ps1:1-30
Timestamp: 2025-11-27T18:56:46.759Z
Learning: Integration tests for MOF-based DSC resources (located in source/DSCResources/**) should use the Initialize-TestEnvironment pattern with -ResourceType 'Mof', not the BeforeDiscovery/BeforeAll pattern. The BeforeDiscovery/BeforeAll pattern is for class-based resources only.
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Use `$PSDefaultParameterValues` only for Pester commands (`Describe`, `Context`, `It`, `Mock`, `Should`, `InModuleScope`)
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-11-27T17:59:27.205Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-pester.instructions.md:0-0
Timestamp: 2025-11-27T17:59:27.205Z
Learning: Applies to **/*.[Tt]ests.ps1 : Mocking in `BeforeAll` (`BeforeEach` only when required)
Applied to files:
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1
📚 Learning: 2025-12-10T20:07:36.848Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2367
File: source/en-US/SqlServerDsc.strings.psd1:489-498
Timestamp: 2025-12-10T20:07:36.848Z
Learning: Do not renumber localization keys to make them sequential when gaps exist in error codes (e.g., RSDD0001 vs RSDD0003). Preserve existing keys. QA tests should already guard against missing or extra localization string keys, so avoid altering the numbering just to achieve contiguity. If modifications touch localization strings, ensure tests reflect the current keys and document any intentional gaps.
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-11-27T17:58:42.327Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-localization.instructions.md:0-0
Timestamp: 2025-11-27T17:58:42.327Z
Learning: Applies to source/en-US/*.strings.psd1 : Prefix string IDs with an acronym derived from the first letter of each word in the class or function name (e.g., SqlSetup → SS, Get-SqlDscDatabase → GSDD), followed by sequential numbers starting from 0001
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-10-04T21:33:23.022Z
Learnt from: dan-hughes
Repo: dsccommunity/UpdateServicesDsc PR: 85
File: source/en-US/UpdateServicesDsc.strings.psd1:1-2
Timestamp: 2025-10-04T21:33:23.022Z
Learning: In UpdateServicesDsc (and similar DSC modules), the module-level localization file (source/en-US/<ModuleName>.strings.psd1) can be empty when DSC resources have their own localization files in source/DSCResources/<ResourceName>/en-US/DSC_<ResourceName>.strings.psd1. Automated tests verify localization completeness for resources. Don't flag empty module-level localization files as issues when resources have separate localization.
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/en-US/DSC_*.strings.psd1 : In `.strings.psd1` files, use underscores as word separators in localized string key names for multi-word keys
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/en-US/DSC_*.strings.psd1 : Name localized strings file as `DSC_<ResourceName>.strings.psd1` in the `en-US` folder
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Import localized strings using `Get-LocalizedData` at the module top level
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : `$PSCmdlet.ShouldProcess` must use the required pattern with `$descriptionMessage`, `$confirmationMessage`, and `$captionMessage`
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use localized strings for all messages including Write-Verbose, Write-Error, and other messaging commands
Applied to files:
source/en-US/SqlServerDsc.strings.psd1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : Use `PSCredential` for credentials
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:58:20.404Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-class-resource.instructions.md:0-0
Timestamp: 2025-11-27T17:58:20.404Z
Learning: Applies to source/[cC]lasses/**/*.ps1 : DSC class-based resources must be decorated with `[DscResource(RunAsCredential = 'Optional')]` or `[DscResource(RunAsCredential = 'Mandatory')]` based on requirements
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2026-01-15T17:58:20.966Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2410
File: source/Public/Remove-SqlDscRSUnattendedExecutionAccount.ps1:115-125
Timestamp: 2026-01-15T17:58:20.966Z
Learning: In public functions under source/Public, use New-Exception and New-ErrorRecord for error handling. Do not use New-InvalidOperationException here; the New-*Exception helpers are intended for class-based resources under source/Classes/**/*.ps1. For public scripts, prefer creating standard exception objects or ErrorRecord via New-ErrorRecord to maintain consistent error reporting across public functions.
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-InvalidOperationException` for invalid operation errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : For error handling, use `New-ErrorRecord` instead of `[System.Management.Automation.ErrorRecord]::new(...)`
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-09-28T13:49:31.541Z
Learnt from: dan-hughes
Repo: dsccommunity/DhcpServerDsc PR: 96
File: source/Modules/DhcpServerDsc.Common/Public/Get-ValidTimeSpan.ps1:36-39
Timestamp: 2025-09-28T13:49:31.541Z
Learning: In DSC Community guidelines, ErrorId parameters in New-TerminatingError calls are identifier strings that do not need localization - only the ErrorMessage parameter should use localized strings from $script:localizedData.
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-InvalidDataException` for invalid data errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:59:01.508Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-mof-resources.instructions.md:0-0
Timestamp: 2025-11-27T17:59:01.508Z
Learning: Applies to source/DSCResources/**/*.psm1 : Use `New-InvalidResultException` for invalid result errors instead of `throw` in MOF-based DSC resources
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : Use `Write-Error` for non-terminating errors with `-Message` (localized string), `-Category` (relevant error category), `-ErrorId` (unique ID), and `-TargetObject` (object causing error)
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-12-24T18:09:36.332Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-powershell.instructions.md:0-0
Timestamp: 2025-12-24T18:09:36.332Z
Learning: Applies to **/*.{ps1,psm1,psd1} : Use `$PSCmdlet.ThrowTerminatingError()` for terminating errors (except for classes), use relevant error category, in try-catch include exception with localized message
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-11-27T17:58:20.404Z
Learnt from: CR
Repo: dsccommunity/SqlServerDsc PR: 0
File: .github/instructions/dsc-community-style-guidelines-class-resource.instructions.md:0-0
Timestamp: 2025-11-27T17:58:20.404Z
Learning: Applies to source/[cC]lasses/**/*.ps1 : DSC class-based resources must use `New-*Exception` commands (such as `New-InvalidDataException`, `New-ArgumentException`, `New-InvalidOperationException`, `New-ObjectNotFoundException`, `New-InvalidResultException`, `New-NotImplementedException`) instead of `throw` for terminating errors in classes
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
📚 Learning: 2025-08-17T10:48:15.384Z
Learnt from: johlju
Repo: dsccommunity/SqlServerDsc PR: 2136
File: source/suffix.ps1:24-24
Timestamp: 2025-08-17T10:48:15.384Z
Learning: In source/suffix.ps1, the Write-Verbose message in the catch block for Import-SqlDscPreferredModule does not need localization because the exception message from Import-SqlDscPreferredModule is already localized by that command, making it an edge case exception to the localization guidelines.
Applied to files:
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1
⏰ Context from checks skipped due to timeout of 90000ms. You can increase the timeout in your CodeRabbit configuration to a maximum of 15 minutes (900000ms). (3)
- GitHub Check: dsccommunity.SqlServerDsc (Build Package Module)
- GitHub Check: PSScriptAnalyzer
- GitHub Check: PSScriptAnalyzer
🔇 Additional comments (10)
tests/Unit/Public/Remove-SqlDscRSUnattendedExecutionAccount.Tests.ps1 (5)
1-44: LGTM! Test setup follows the required template correctly.The BeforeDiscovery, BeforeAll, and AfterAll blocks correctly implement all required patterns including:
- DscResource.Test module import with proper error handling
$env:SqlServerDscCI = $truesetup and teardown- PSDefaultParameterValues configuration for Pester commands
46-64: LGTM! Parameter set validation follows the required template.
66-88: LGTM! Good separation of concerns in test assertions.The two
Itblocks appropriately test distinct behaviors: method invocation and return value. Mock setup correctly omits-MockWithfor null returns per guidelines.
123-137: LGTM! Error handling test correctly validates terminating error.The ErrorId
RSRSUEA0001matches the implementation. The mock correctly simulates a CIM method failure scenario.
139-169: LGTM! WhatIf and parameter input scenarios well covered.Both contexts properly validate expected behavior: WhatIf prevents method invocation, and configuration parameter input works correctly.
source/Public/Set-SqlDscRSUnattendedExecutionAccount.ps1 (3)
1-78: LGTM! Well-documented comment-based help.The help includes SYNOPSIS, DESCRIPTION, PARAMETER, INPUTS, OUTPUTS, NOTES, and LINK sections with multiple examples covering pipeline usage, Force parameter, and PassThru scenarios.
79-101: LGTM! Function declaration follows DSC Community guidelines.Proper use of
CmdletBinding,SupportsShouldProcess,ConfirmImpact,OutputType, andPSCredentialfor credentials.
104-159: LGTM! Process block implementation is solid.
- Force parameter pattern correctly implemented
- ShouldProcess uses the required three-parameter pattern with localized strings
- SecureString conversion with proper BSTR cleanup in
finallyblock- Error handling follows public function guidelines using
New-ExceptionandNew-ErrorRecord- Write-Verbose correctly placed outside the ShouldProcess block
Based on learnings, the use of
New-ExceptionandNew-ErrorRecord(instead ofNew-InvalidOperationException) is correct for public functions.source/en-US/SqlServerDsc.strings.psd1 (2)
306-306: LGTM! Retry string follows existing pattern.The new string for retry logic uses the correct prefix
GSRSCDmatching otherGet-SqlDscRSConfigurationstrings, with sequential numbering0005.
922-928: LGTM! Remove function strings are correctly formatted.The string ID prefix
RSRSUEAcorrectly follows the first-letter pattern forRemove-SqlDscRSUnattendedExecutionAccount. All required ShouldProcess strings (Description, Confirmation, Caption) and error string are present.
✏️ Tip: You can disable this entire section by setting review_details to false in your review settings.
1 participant
Pull Request (PR) description
Set-SqlDscRSUnattendedExecutionAccountandRemove-SqlDscRSUnattendedExecutionAccountto manage the unattended executionaccount for Reporting Services. These wrap the
SetUnattendedExecutionAccountCIM method.
This Pull Request (PR) fixes the following issues
None.
Task list
file CHANGELOG.md. Entry should say what was changed and how that
affects users (if applicable), and reference the issue being resolved
(if applicable).
This change is