Fix schema validation errors in entity domain and light docs

src/content/docs/components/cover/current_based.mdx

@@ -69,11 +69,11 @@ cover:
 - **open_moving_current_threshold** (**Required**, float): The amount of current in Amps the motor
   should drain to consider the cover is opening.
 
-- **open_obstacle_current_threshold** (**Required**, float): The amount of current in Amps the motor
+- **open_obstacle_current_threshold** (*Optional*, float): The amount of current in Amps the motor
   should drain to consider the cover is blocked during opening.
 
 - **close_sensor** (**Required**, [ID](/guides/configuration-types#id)): The close current sensor.
-- **close_action** (*Optional*, [Action](/automations/actions#all-actions)): The action that should
+- **close_action** (**Required**, [Action](/automations/actions#all-actions)): The action that should
   be performed when the remote requests the cover to be closed.
 
 - **close_duration** (**Required**, [Time](/guides/configuration-types#time)): The amount of time it takes the cover
@@ -82,7 +82,7 @@ cover:
 - **close_moving_current_threshold** (**Required**, float): The amount of current in Amps the motor
   should drain to consider the cover is closing.
 
-- **close_obstacle_current_threshold** (**Required**, float): The amount of current in Amps the motor
+- **close_obstacle_current_threshold** (*Optional*, float): The amount of current in Amps the motor
   should drain to consider the cover is blocked during closing.
 
 - **stop_action** (**Required**, [Action](/automations/actions#all-actions)): The action that should

src/content/docs/components/cover/index.mdx

@@ -181,14 +181,14 @@ on_...:
 Configuration variables:
 
 - **id** (**Required**, [ID](/guides/configuration-types#id)): The cover to control.
-- **stop** (*Optional*, boolean): Whether to stop the cover.
-- **state** (*Optional*, string): The state to set the cover to - one of `OPEN` or `CLOSE`.
-- **position** (*Optional*, float): The cover position to set.
+- **stop** (*Optional*, boolean, [templatable](/automations/templates)): Whether to stop the cover.
+- **state** (*Optional*, string, [templatable](/automations/templates)): The state to set the cover to - one of `OPEN` or `CLOSE`.
+- **position** (*Optional*, float, [templatable](/automations/templates)): The cover position to set.
 
   - `0.0` = `0%` = `CLOSED`
   - `1.0` = `100%` = `OPEN`
 
-- **tilt** (*Optional*, float): The tilt position to set. In range 0% - 100%.
+- **tilt** (*Optional*, float, [templatable](/automations/templates)): The tilt position to set. In range 0% - 100%.
 
 > [!NOTE]
 > This action can also be expressed in [lambdas](/automations/templates#config-lambda):

src/content/docs/components/cover/time_based.mdx

@@ -41,7 +41,7 @@ cover:
 - **open_duration** (**Required**, [Time](/guides/configuration-types#time)): The amount of time it takes the cover
   to open up from the fully-closed state.
 
-- **close_action** (*Optional*, [Action](/automations/actions#all-actions)): The action that should
+- **close_action** (**Required**, [Action](/automations/actions#all-actions)): The action that should
   be performed when the remote requests the cover to be closed.
 
 - **close_duration** (**Required**, [Time](/guides/configuration-types#time)): The amount of time it takes the cover

src/content/docs/components/event/index.mdx

@@ -119,7 +119,7 @@ This action allows for the triggering of an event from within an automation.
 Configuration variables:
 
 - **id** (**Required**, [ID](/guides/configuration-types#id)): The ID of the event.
-- **event_type** (**Required**, string): The type of event to trigger.
+- **event_type** (**Required**, string, [templatable](/automations/templates)): The type of event to trigger.
 
 <span id="event-lambda_calls"></span>
 

src/content/docs/components/light/esp32_rmt_led_strip.mdx

@@ -24,7 +24,7 @@ light:
 
 - **pin** (**Required**, [Pin Schema](/guides/configuration-types#pin-schema)): The pin for the data line of the light.
 - **num_leds** (**Required**, int): The number of LEDs in the strip.
-- **chipset** (**Required**, enum): The name of the chipset used; determines signal timing. Not required if
+- **chipset** (*Optional*, enum): The name of the chipset used; determines signal timing. Not required if
   [specifying the timings manually](#esp32-rmt-led-strip-manual_timings).
 
   - `WS2811`

src/content/docs/components/light/neopixelbus.mdx

@@ -78,9 +78,9 @@ light:
 Some chipsets have two data pins to connect, others only have one.
 If you have one line, only specify `pin`, otherwise specify both `clock_pin` and `data_pin`.
 
-- **pin** (**Required**, [Pin](/guides/configuration-types#pin)): The pin for the data line of the light.
-- **clock_pin** (**Required**, [Pin](/guides/configuration-types#pin)): The pin for the clock line of the light, for two-wire lights.
-- **data_pin** (**Required**, [Pin](/guides/configuration-types#pin)): The pin for the data line of the light, for two-wire lights.
+- **pin** (*Optional*, [Pin](/guides/configuration-types#pin)): The pin for the data line of the light.
+- **clock_pin** (*Optional*, [Pin](/guides/configuration-types#pin)): The pin for the clock line of the light, for two-wire lights.
+- **data_pin** (*Optional*, [Pin](/guides/configuration-types#pin)): The pin for the data line of the light, for two-wire lights.
 
 - All other options from [Light](/components/light#config-light).
 

src/content/docs/components/light/rp2040_pio_led_strip.mdx

@@ -23,7 +23,7 @@ light:
 - **num_leds** (**Required**, int): The number of LEDs in the strip.
 - **pio** (**Required**, int): The PIO peripheral to use. If using multiple strips, you can use up to 4 strips per PIO. Must be one of `0` or `1`.
 
-- **chipset** (**Required**, enum): The chipset to apply known timings from.
+- **chipset** (*Optional*, enum): The chipset to apply known timings from.
   - `WS2812`
   - `WS2812B`
   - `SK6812`

src/content/docs/components/media_player/speaker.mdx

@@ -158,8 +158,8 @@ on_...:
 Configuration variables:
 
 - **media_file** (**Required**, [ID](/guides/configuration-types#id)): The ID of the media file.
-- **announcement** (*Optional*, boolean): Whether to play back the file as an announcement or media stream. Defaults to `false`.
-- **enqueue** (*Optional*, boolean): Whether to add the media file to the end of the pipeline's internal playlist. Defaults to `false`.
+- **announcement** (*Optional*, boolean, [templatable](/automations/templates)): Whether to play back the file as an announcement or media stream. Defaults to `false`.
+- **enqueue** (*Optional*, boolean, [templatable](/automations/templates)): Whether to add the media file to the end of the pipeline's internal playlist. Defaults to `false`.
 
 <span id="media_player-speaker-performance"></span>
 

src/content/docs/components/speaker/index.mdx

@@ -51,7 +51,7 @@ on_...:
 Configuration variables:
 
 - **id** (*Optional*, [ID](/guides/configuration-types#id)): The speaker to control. Defaults to the only one in YAML.
-- **data** (**Required**, list of bytes): The raw audio data to play.
+- **data** (**Required**, list of bytes, [templatable](/automations/templates)): The raw audio data to play.
 
 <span id="speaker-stop"></span>
 

src/content/docs/components/speaker/mixer.mdx

@@ -57,8 +57,8 @@ on_...:
 
 Configuration variables:
 
-- **decibel_reduction** (**Required**, int, templatable): The reduction of the media stream in decibels. Must be between 0 and 50.
-- **duration** (*Optional*, [Time](/guides/configuration-types#time), templatable): The length of time to transition between the current reduction level and the new reduction level. Defaults to `0s`.
+- **decibel_reduction** (**Required**, int, [templatable](/automations/templates)): The reduction of the media stream in decibels. Must be between 0 and 50.
+- **duration** (*Optional*, [Time](/guides/configuration-types#time), [templatable](/automations/templates)): The length of time to transition between the current reduction level and the new reduction level. Defaults to `0s`.
 
 ## See Also
 

src/content/docs/components/update/index.mdx

@@ -52,7 +52,7 @@ This action allows you to trigger the update entity to start the update process.
 Configuration variables:
 
 - **id** (**Required**, [ID](/guides/configuration-types#id)): The ID of the update entity.
-- **force_update** (*Optional*, boolean): Perform the update even if the device is already running the same version.
+- **force_update** (*Optional*, boolean, [templatable](/automations/templates)): Perform the update even if the device is already running the same version.
   Defaults to `false`.
 
 ### `update.check` Action

src/content/docs/components/valve/index.mdx

@@ -166,9 +166,9 @@ on_...:
 Configuration variables:
 
 - **id** (**Required**, [ID](/guides/configuration-types#id)): The valve to control.
-- **stop** (*Optional*, boolean): Whether to stop the valve.
-- **state** (*Optional*, string): The state to set the valve to - one of `OPEN` or `CLOSE`.
-- **position** (*Optional*, float): The valve position to set.
+- **stop** (*Optional*, boolean, [templatable](/automations/templates)): Whether to stop the valve.
+- **state** (*Optional*, string, [templatable](/automations/templates)): The state to set the valve to - one of `OPEN` or `CLOSE`.
+- **position** (*Optional*, float, [templatable](/automations/templates)): The valve position to set.
 
   - `0.0` = `0%` = `CLOSED`
   - `1.0` = `100%` = `OPEN`