Board Assembly Guide

##Instructions for each available board

###1. SEN0177 To make your own BLE sensor node using SEN0177, you will need the following items:

Part	Description
SEN0177 PCB	The PSoC BLE Node PCB for SEN0177, follow these instructions to order or make one
PSoC BLE Module	You will need one PSoC BLE module. The boards are compatible CY5671, to use other similar modules you will need to change the PSoC Creator project settings.
SEN0177	A Laser-based dust sensor you can find here.
USB Module	A micro USB breakout board that will be used to power the board, you can order one here.
Pin Headers	You need a 6-pin 2.54mm female header and 2.54mm double headers.
LEDs	You will need two 3mm LEDs at any color of your choice.
Resistors	You will need two 680Ω resistors.

After gathering the above follow these steps to assemble your board (the bottom layer of your PCB is marked with blue):

Step	Board	Part
1. Solder the 2x10 & 2x12 headers	[[ images/assembly/SEN0177/1.PNG	width = 150px ]]
2. Solder the single 6-pin female header	[[ images/assembly/SEN0177/2.PNG	width = 150px ]]
3. Solder the 3mm LEDs	[[ images/assembly/SEN0177/3.PNG	width = 150px ]]
4. Solder the resistors	[[ images/assembly/SEN0177/4.PNG	width = 150px ]]
5. Solder the micro USB Module	[[ images/assembly/SEN0177/6.PNG	width = 150px ]]
6. Connect the programmed BLE Module to the matching headers	[[ images/assembly/SEN0177/5.PNG	width = 150px ]]
7. Connect the sensor	[[ images/assembly/SEN0177/2.PNG	width = 150px ]]

###2. SDS011 To make your own BLE sensor node using SDS011, you will need the following items:

Part	Description
SDS011 PCB	The PSoC BLE Node PCB for SDS011, follow these instructions to order or make one
PSoC BLE Module	You will need one PSoC BLE module. The boards are compatible CY5671, to use other similar modules you will need to change the PSoC Creator project settings.
SDS011	A Laser-based dust sensor you can find here.
USB Module	A micro USB breakout board that will be used to power the board, you can order one here.
Pin Headers	You need 2.54mm single headers and 2.54mm double headers.
LEDs	You will need two 3mm LEDs at any color of your choice.
Resistors	You will need two 680Ω resistors.
###3. PPD42
To make your own BLE sensor node using PPD42, you will need the following items:

Part	Description
PPD42 PCB	The PSoC BLE Node PCB for PPD42, follow these instructions to order or make one
PSoC BLE Module	You will need one PSoC BLE module. The boards are compatible CY5671, to use other similar modules you will need to change the PSoC Creator project settings.
PPD42	An LED-based dust sensor you can find here.
USB Module	A micro USB breakout board that will be used to power the board, you can order one here.
Pin Headers	You need 2.54mm single headers and 2.54mm double headers.
LEDs	You will need two 3mm LEDs at any color of your choice.
Resistors	You will need two 680Ω resistors.
###4. GP2Y1010AU0F
To make your own BLE sensor node using GP2Y1010AU0F, you will need the following items:

Part	Description
GP2Y1010AU0F PCB	The PSoC BLE Node PCB for GP2Y1010AU0F, follow these instructions to order or make one
PSoC BLE Module	You will need one PSoC BLE module. The boards are compatible CY5671, to use other similar modules you will need to change the PSoC Creator project settings.
GP2Y1010AU0F	An LED-based dust sensor you can find here.
USB Module	A micro USB breakout board that will be used to power the board, you can order one here.
Pin Headers	You need 2.54mm single headers and 2.54mm double headers.
LEDs	You will need two 3mm LEDs at any color of your choice.
Resistors	You will need one 150Ω and two 680Ω resistors.
Capacitors	You will need one 220uF capacitor.
###5. DN7C3CA006
To make your own BLE sensor node using DN7C3CA006 , you will need the following items:

Part	Description
DN7C3CA006 PCB	The PSoC BLE Node PCB for DN7C3CA006, follow these instructions to order or make one
PSoC BLE Module	You will need one PSoC BLE module. The boards are compatible CY5671, to use other similar modules you will need to change the PSoC Creator project settings.
DN7C3CA006	A laser based dust sensor you can find here.
USB Module	A micro USB breakout board that will be used to power the board, you can order one here.
Pin Headers	You need 2.54mm single headers and 2.54mm double headers.
LEDs	You will need two 3mm LEDs at any color of your choice.
Resistors	You will need one 150Ω and two 680Ω resistors.
Capacitors	You will need one 220uF capacitor.