Install instructions

DISCLAIMER: The halogenOS software is provided "as is", without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement. IN NO EVENT SHALL THE AUTHORS OR THE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. You are responsible for what you do with your own device. With great freedom comes great responsibility.

Now to the installation instructions.

Requirements

• 3.2 Firmware (currently tested NOS V3.2-250917-1451)

Instructions

1. Download the boot.img, vendor_boot.img and recovery.img provided in the release
2. Use fastboot or your preferred way to flash. (fastboot flash boot boot.img && fastboot flash vendor_boot vendor_boot.img && fastboot flash recovery recovery.img).
3. Reboot into recovery (do not change the slot before rebooting)
4. If this is your first time flashing halogenOS, it's highly recommended to wipe data (factory reset) in recovery now. Upgrading from 15.2 is supported. Testes upgrade path is 14 -> 15 -> 15.1 -> 15.2 -> 16.0.
5. Apply update -> Apply from ADB
6. Sideload the ZIP form the release (adb sideload halogenOS_Pong-...)