Apply prettier to config files; Update readme

.editorconfig

@@ -9,8 +9,5 @@ charset = utf-8
 trim_trailing_whitespace = true
 insert_final_newline = true
 
-[*.html]
-indent_size = 4
-
 [*.md]
 max_line_length = off

README.md

@@ -1,69 +1,72 @@
 # Split Flap Display Firmware
+
 Firmware for the modular Split Flap Display created by [Morgan Manly](https://github.com/ManlyMorgan/Split-Flap-Display)
 
 - [Instructables](https://www.instructables.com/Split-Flap-Display-3D-Printed-Modular-Compact-Encl/) ( original )
 - [Print Files](https://makerworld.com/en/models/1116618#profileId-1114192) ( original )
 - [Original firmware](https://github.com/ManlyMorgan/Split-Flap-Display)
 
 ## Features
+
 - Fully 3D Printed Modular Split Flap Display with 37 Characters Per Module
 - Small Size, 8 Modules are 320mm, 3 Modules are 130mm Wide. 80mm Tall
 - Fully configurable and controllable via Web Interface
     - Switch Between Operation Modes, modes include custom input, date mode, and time mode
     - Configure WiFi, Timezone, and hardware settings
-
-## Future features ( help wanted )
-- Additional board support
-- Pre-built firmware releases with web-based firmware update via [esptool-js](https://espressif.github.io/esptool-js/docs/index.html)
-- Optional basic json API endpoint to update display remotely
-- [ESPHome](https://esphome.io) support
-- Support multi-character modules ( each I/O expander board can drive up to 3 motor / sensor pairs )
-- Support multiple i2c busses
-- Support for i2c multiplexer expansion
-- Option to have messages complete at the same time ( delayed start )
+- MQTT Support
+- OTA Firmware / Filesystem updating
 
 ## Supported boards
+
 | Environment          | Processor     | Tested Boards                                                |
 | -------------------- | ------------- | ------------------------------------------------------------ |
 | `esp32_c3` (default) | ESP32-C3FN4   | Teyleten Robot ESP32-C3-SuperMini<br>Waveshare ESP32-C3-Zero |
-| `esp32_s3`           | ESP32-S3FH4R2 | Waveshare ESP32-S3-Zero<sup>*</sup>                          |
+| `esp32_s3`           | ESP32-S3FH4R2 | Waveshare ESP32-S3-Zero<sup>\*</sup>                         |
 
-<sub>* Requires manually resetting the board into firmware upload mode by holding BOOT, pressing & releasing RESET, then releasing BOOT prior to upload. After uploading is successful, either press & release RESET or power cycle the board to put it in normal operation mode.</sub>
+<sub>\* Requires manually resetting the board into firmware upload mode by holding BOOT, pressing & releasing RESET, then releasing BOOT prior to upload. After uploading is successful, either press & release RESET or power cycle the board to put it in normal operation mode.</sub>
 
 ## Setup Instructions
 
 1. Install dependencies
-    * [PlatformIO Core CLI](https://platformio.org/install/cli)
-    * [Node Version Mananger](https://github.com/nvm-sh/nvm)
-    * [ClangFormat](https://clang.llvm.org/docs/ClangFormat.html) (Only required if contributing code)
+    - [PlatformIO Core CLI](https://platformio.org/install/cli)
+    - [Node Version Mananger](https://github.com/nvm-sh/nvm)
+    - [ClangFormat](https://clang.llvm.org/docs/ClangFormat.html) (Only required if contributing code)
 1. [Download](https://github.com/jhoff/Split-Flap-Display/archive/refs/heads/main.zip) or clone this [git repository](https://github.com/jhoff/Split-Flap-Display).
 1. Open a terminal and `cd` to the project root
 1. Install required version of npm for the project - `nvm install`
 1. Install build dependencies - `npm install`
 1. Connect the ESP32 to your computer using a USB cable.
 1. Build everything and upload to the board - `npm run build`
-  * Automatically formats all source code ( `npm run format` - if needed )
-  * Compiles and minifies all frontend assets ( `npm run assets` )
-  * Downloads all required arduino / esp32 libraries
-  * Compiles and uploads the esp32 firmware ( `npm run pio:firmware` or `pio run -t upload -e <environment>` )
-  * Compiles and uploads the littlefs filesystem ( `npm run pio:filesystem` or `pio run -t uploadfs -e <environment>` )
+
+- Automatically formats all source code ( `npm run format` - if needed )
+- Compiles and minifies all frontend assets ( `npm run assets` )
+- Downloads all required arduino / esp32 libraries
+- Compiles and uploads the esp32 firmware ( `npm run pio:firmware` or `pio run -t upload -e <environment>` )
+- Compiles and uploads the littlefs filesystem ( `npm run pio:filesystem` or `pio run -t uploadfs -e <environment>` )
+
 1. Enjoy!
 
 ## Contributing
 
 ### Setup
+
 1. Create a GitHub account if necessary and login.
 1. [Fork](https://github.com/jhoff/Split-Flap-Display/fork) this repository.
 1. Clone your forked repository to your local machine.
-  * `git clone https://github.com/your-username/Split-Flap-Display.git`
+
+- `git clone https://github.com/your-username/Split-Flap-Display.git`
+
 1. Install the dependencies listed in [Setup Instructions](#setup-instructions)
 1. Skip step 2, complete the setup and use `npm run build` to test and upload your changes.
 
 ### Create your feature
+
 1. Start a new branch with a descriptive name.
 1. Compile and upload your changes
-  * `npm run pio:firmware` or `pio run -t upload -e <environment>` to compile firmware and upload
-  * `npm run pio:filesystem` or `pio run -t uploadfs -e <environment>` to compile the filesystem from `src/web` and upload
-  * You can do both together using `npm run pio` or `pio run -t upload -t uploadfs -e <environment>`
+
+- `npm run pio:firmware` or `pio run -t upload -e <environment>` to compile firmware and upload
+- `npm run pio:filesystem` or `pio run -t uploadfs -e <environment>` to compile the filesystem from `src/web` and upload
+- You can do both together using `npm run pio` or `pio run -t upload -t uploadfs -e <environment>`
+
 1. When ready, commit and push your changes to your forked repository.
 1. Open a pull request to this repository.