arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances

In AM69 SoC there are 4 instances of the 4 lane SERDES. So in
"serdes_ln_ctrl" node there are total 16 entries in "mux-reg-mask"
property. But "idle-states" is defined only for the lanes of first two
SERDES instances. SERDES lane mapping is left at its reset state of
"zero" for all four lanes of SERDES2 and SERDES4. The reset state of
"zero" corresponds to the following configuration:

Lanes 0 and 1 of SERDES2 are unused
CPSW MAC Ports 1 and 2 mapped to lanes 2 and 3 of SERDES2
EDP Lanes 0, 1, 2 and 3 mapped to lanes 0, 1, 2 and 3 of SERDES4

For completeness, define the "idle-states" for the lanes of remaining
SERDES instances.

Signed-off-by: Hrushikesh Salunke <[email protected]>
Reviewed-by: Siddharth Vadapalli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vignesh Raghavendra <[email protected]>

Author: hrushikesh221

arch/arm64/boot/dts/ti/k3-am69-sk.dts

@@ -1306,8 +1306,12 @@
 &serdes_ln_ctrl {
 	idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
 		      <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>,
-			<J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
-			<J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>;
+		      <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+		      <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+		      <J784S4_SERDES2_LANE0_IP2_UNUSED>, <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+		      <J784S4_SERDES2_LANE2_QSGMII_LANE1>, <J784S4_SERDES2_LANE3_QSGMII_LANE2>,
+		      <J784S4_SERDES4_LANE0_EDP_LANE0>, <J784S4_SERDES4_LANE1_EDP_LANE1>,
+		      <J784S4_SERDES4_LANE2_EDP_LANE2>, <J784S4_SERDES4_LANE3_EDP_LANE3>;
 };
 
 &serdes_wiz0 {