config-nacos (This is a community driven project)

中文

Nacos as config centre for service governance.

Usage

Basic

Server

package main

import (
	"context"
	"log"

	"github.com/cloudwego/kitex-examples/kitex_gen/api"
	"github.com/cloudwego/kitex-examples/kitex_gen/api/echo"
	"github.com/cloudwego/kitex/pkg/klog"
	"github.com/cloudwego/kitex/pkg/rpcinfo"
	"github.com/cloudwego/kitex/server"
	"github.com/kitex-contrib/config-nacos/nacos"
	nacosserver "github.com/kitex-contrib/config-nacos/server"
)

var _ api.Echo = &EchoImpl{}

// EchoImpl implements the last service interface defined in the IDL.
type EchoImpl struct{}

// Echo implements the Echo interface.
func (s *EchoImpl) Echo(ctx context.Context, req *api.Request) (resp *api.Response, err error) {
	klog.Info("echo called")
	return &api.Response{Message: req.Message}, nil
}

func main() {
	nacosClient, err := nacos.NewClient(nacos.Options{})
	if err != nil {
		panic(err)
	}
	serviceName := "ServiceName" // your server-side service name
	svr := echo.NewServer(
		new(EchoImpl),
		server.WithServerBasicInfo(&rpcinfo.EndpointBasicInfo{ServiceName: serviceName}),
		server.WithSuite(nacosserver.NewSuite(serviceName, nacosClient)),
	)
	if err := svr.Run(); err != nil {
		log.Println("server stopped with error:", err)
	} else {
		log.Println("server stopped")
	}
}

Client

package main

import (
	"context"
	"log"

	"github.com/cloudwego/kitex-examples/kitex_gen/api"
	"github.com/cloudwego/kitex-examples/kitex_gen/api/echo"
	"github.com/cloudwego/kitex/client"
	"github.com/cloudwego/kitex/pkg/klog"
	nacosclient "github.com/kitex-contrib/config-nacos/client"
	"github.com/kitex-contrib/config-nacos/nacos"
	"github.com/nacos-group/nacos-sdk-go/vo"
)

type configLog struct{}

func (cl *configLog) Apply(opt *utils.Options) {
	fn := func(cp *vo.ConfigParam) {
		klog.Infof("nacos config %v", cp)
	}
	opt.NacosCustomFunctions = append(opt.NacosCustomFunctions, fn)
}

func main() {
	nacosClient, err := nacos.NewClient(nacos.Options{})
	if err != nil {
		panic(err)
	}

    cl := &configLog{}
	serviceName := "ServiceName" // your server-side service name
	clientName := "ClientName"   // your client-side service name
	client, err := echo.NewClient(
		serviceName,
		client.WithHostPorts("0.0.0.0:8888"),
		client.WithSuite(nacosclient.NewSuite(serviceName, clientName, nacosClient, cl)),
	)
	if err != nil {
		log.Fatal(err)
	}
	for {
		req := &api.Request{Message: "my request"}
		resp, err := client.Echo(context.Background(), req)
		if err != nil {
			klog.Errorf("take request error: %v", err)
		} else {
			klog.Infof("receive response %v", resp)
		}
	}
}

Nacos Configuration

The client is initialized according to the parameters of Options and connects to the nacos server. After the connection is established, the suite subscribes the appropriate configuration based on Group, ServerDataIDFormat and ClientDataIDFormat to updates its own policy dynamically. See the Options variables below for specific parameters.

The configuration format supports json and yaml. You can use the SetParser function to customise the format parsing method, and the CustomFunction function to customise the format of the subscription function during NewSuite.

CustomFunction

Provide the mechanism to custom the nacos parameter vo.ConfigParam.

Options Variable

Variable Name	Default Value	Introduction
Address	127.0.0.1	Nacos server address, may use the environment of serverAddr
Port	8848	Nacos server port, may use the environment of serverPort
NamespaceID		The namespaceID of Nacos, may use the environment of namespace
ClientDataIDFormat	{{.ClientServiceName}}.{{.ServerServiceName}}.{{.Category}}	Use go template syntax rendering to generate the appropriate ID, and use ClientServiceName ServiceName Category three metadata that can be customised
ServerDataIDFormat	{{.ServerServiceName}}.{{.Category}}	Use go template syntax rendering to generate the appropriate ID, and use ServiceName Category two metadatas that can be customised
Group	DEFAULT_GROUP	Use fixed values or dynamic rendering. Usage is the same as configDataId.

Governance Policy

The configDataId and configGroup in the following example use default values, the service name is ServiceName and the client name is ClientName.

Rate Limit Category=limit

Currently, current limiting only supports the server side, so ClientServiceName is empty.

JSON Schema

Variable	Introduction
connection_limit	Maximum concurrent connections
qps_limit	Maximum request number every 100ms

Example:

configDataID: ServiceName.limit

{
  "connection_limit": 100,
  "qps_limit": 2000
}

Note:

• The granularity of the current limit configuration is server global, regardless of client or method.
• Not configured or value is 0 means not enabled.
• connection_limit and qps_limit can be configured independently, e.g. connection_limit = 100, qps_limit = 0

Retry Policy Category=retry

JSON Schema

Variable	Introduction
type	0: failure_policy 1: backup_policy
failure_policy.backoff_policy	Can only be set one of fixed none random

Example：

configDataId: ClientName.ServiceName.retry

{
    "*": {  
        "enable": true,
        "type": 0,                 
        "failure_policy": {
            "stop_policy": {
                "max_retry_times": 3,
                "max_duration_ms": 2000,
                "cb_policy": {
                    "error_rate": 0.5
                }
            },
            "backoff_policy": {
                "backoff_type": "fixed", 
                "cfg_items": {
                    "fix_ms": 50
                }
            },
            "retry_same_node": false
        }
    },
    "echo": { 
        "enable": true,
        "type": 1,                 
        "backup_policy": {
            "retry_delay_ms": 100,
            "retry_same_node": false,
            "stop_policy": {
                "max_retry_times": 2,
                "max_duration_ms": 300,
                "cb_policy": {
                    "error_rate": 0.2
                }
            }
        }
    }
}

Note: retry.Container has built-in support for specifying the default configuration using the * wildcard (see the getRetryer method for details).

RPC Timeout Category=rpc_timeout

JSON Schema

Example：

configDataId: ClientName.ServiceName.rpc_timeout

{
  "*": {
    "conn_timeout_ms": 100,
    "rpc_timeout_ms": 3000
  },
  "echo": {
    "conn_timeout_ms": 50,
    "rpc_timeout_ms": 1000
  }
}

Note: The circuit breaker implementation of kitex does not currently support changing the global default configuration (see initServiceCB for details).

Circuit Break: Category=circuit_break

JSON Schema

Variable	Introduction
min_sample	Minimum statistical sample number

Example：

The echo method uses the following configuration (0.3, 100) and other methods use the global default configuration (0.5, 200)

configDataId: ClientName.ServiceName.circuit_break

{
  "echo": {
    "enable": true,
    "err_rate": 0.3, 
    "min_sample": 100 
  }
}

Degradation: Category=degradation

JSON Schema

Variable	Introduction
enable	Whether to enable degradation
percentage	The percentage of dropped requests

Example：

The all requests uses the following configuration (true, 50)

configDataId: ClientName.ServiceName.degradation

{
  "enable": true,
  "percentage": 50
}

More Info

Refer to example for more usage.

Note

Do not delete the config in nacos, otherwise the nacos sdk may produce a large warning log.

Compatibility

This Package use Nacos1.x client. The Nacos2.0 and Nacos1.0 Server are fully compatible with it. see

maintained by: whalecold