µpysweeper

pysweeper without a GUI

upysweeper.webm

Note: If the serial output dumps to screen and you get a green light then no light just turn your PSP over and with the power cable still plugged in turn on the PSP. It should autoboot into Despertar del Cementerio

Setup & Install

1. Make sure you have pyserial and pycryptodome installed.

   1. pip install -r requirements.txt

2. python3 ./upysweeper.py or ./upysweeper.py

Options:

./upysweeper.py -p SERIAL_PORT -bt BATTERY_TYPE

example:
    ./upysweeper.py -p /dev/ttyUSB0 -bt Autoboot 

Battery types

• "Service" which is 0xFFFFFFFF and set as default

• "Autoboot" which is 0x00000000

• "Normal" which is 0x34127856 (just random)

• "Custom" 0x12345678 or 12345678 allow custom serial to be used

Embedded flag

• -e if defined will just be set to true

• This is to tell upysweeper to not run a test for an echo it has been only tested on the Milk-V Duo with a custom image.

• PIN GP2 (RX) schematic(PIN 5)

• PIN GP3 (TX) schematic (PIN 4)

Milk-V DUO

LincheeRV Nano

Original work

• khubik2's pysweeper repo