lichee-nano
This docker image contains a system that is ready to build the lichee-nano firmware.

Getting started

Pull the image

 docker pull jacklan/licheepi_nano

Get the source code

cd && mkdir lichee-code && cd lichee-code
git clone --single-branch --branch nano-v2018.01 https://github.com/Lichee-Pi/u-boot.git
git clone --single-branch --branch f1c100s-480272lcd-test https://github.com/Icenowy/linux.git    

Running the container

Mount the source code directories and run interactive:

docker run -it -v ~/lichee-code:/opt/lichee jacklan/licheepi_nano /bin/bash

You can give the container access to the device like this:

docker run -it -v ~/lichee-code:/opt/lichee --privileged -v /dev/bus/usb:/dev/bus/usb jacklan/licheepi_nano /bin/bash

Make sure the name of the device matches your system.

Building

U-Boot

First configure:

cd /opt/lichee/u-boot
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- licheepi_nano_spiflash_defconfig
make ARCH=arm menuconfig

Then build it:

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- -j8

Linux

make ARCH=arm menuconfig
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- -j4