Mounting

Introduction

To mount None you can use fsfatmount.

There is support for the following back-ends:

• Dokan library
• fuse
• OSXFuse

To build fsfatmount see Building.

If you get the error:

No sub system to mount FSFAT.

That means fuse was not detected when building the fsfattools, check if you have fuse-dev installed and if ./configure is able to detect it. The last part of the ./configure output shows you this in an overview.

Why is /mnt/fuse not accessible as root

By default fuse prevents root access to the mount point when None is mounted. To enable this functionality first check the fuse documentation.

Make sure the fuse configuration file:

/etc/fuse.conf

Contains:

user_allow_other

Pass "allow_root" to the fuse sub system using the fsfatmount -X option:

fsfatmount -X allow_root None /mnt/fuse

Unmounting

You can unmount /mnt/fuse using umount:

umount /mnt/fuse

Or fusermount:

fusermount -u /mnt/fuse

Windows

At the moment terminate the process running in the console.

Troubleshooting

First of all make sure to check the output of configure. If you're seeing something like the following output configure was unable to detect an usable fuse.

Building:
   ...
   FUSE support:                                    no

On Mac OS X:

• make sure that you only have OSXFuse installed and not another variant, like MacFuse, besides it.
• try adding the C pre processor flags that set the fuse API version, e.g.

CPPFLAGS=-DFUSE_USE_VERSION=26 ./configure

• if all else fails; file a support issue and attach config.log

On Ubuntu:

fusermount – failed to open /etc/fuse.conf – Permission denied

Make sure you're part of the group fuse:

sudo addgroup <username> fuse

If fusermount keeps complaining it cannot open fuse.conf:

sudo chmod o+r /etc/fuse.conf