[lldb-dap] Migrate attach to typed RequestHandler.

lldb/tools/lldb-dap/DAP.cpp

@@ -675,12 +675,11 @@ lldb::SBTarget DAP::CreateTarget(lldb::SBError &error) {
   // enough information to determine correct arch and platform (or ELF can be
   // omitted at all), so it is good to leave the user an opportunity to specify
   // those. Any of those three can be left empty.
-  auto target = this->debugger.CreateTarget(
-      configuration.program.value_or("").data(),
-      configuration.targetTriple.value_or("").data(),
-      configuration.platformName.value_or("").data(),
-      true, // Add dependent modules.
-      error);
+  auto target = this->debugger.CreateTarget(configuration.program.data(),
+                                            configuration.targetTriple.data(),
+                                            configuration.platformName.data(),
+                                            true, // Add dependent modules.
+                                            error);
 
   return target;
 }
@@ -1192,7 +1191,7 @@ bool SendEventRequestHandler::DoExecute(lldb::SBDebugger debugger,
 }
 
 void DAP::ConfigureSourceMaps() {
-  if (configuration.sourceMap.empty() && !configuration.sourcePath)
+  if (configuration.sourceMap.empty() && configuration.sourcePath.empty())
     return;
 
   std::string sourceMapCommand;
@@ -1203,8 +1202,8 @@ void DAP::ConfigureSourceMaps() {
     for (const auto &kv : configuration.sourceMap) {
       strm << "\"" << kv.first << "\" \"" << kv.second << "\" ";
     }
-  } else if (configuration.sourcePath) {
-    strm << "\".\" \"" << *configuration.sourcePath << "\"";
+  } else if (!configuration.sourcePath.empty()) {
+    strm << "\".\" \"" << configuration.sourcePath << "\"";
   }
 
   RunLLDBCommands("Setting source map:", {sourceMapCommand});
@@ -1213,12 +1212,13 @@ void DAP::ConfigureSourceMaps() {
 void DAP::SetConfiguration(const protocol::Configuration &config,
                            bool is_attach) {
   configuration = config;
+  stop_at_entry = config.stopOnEntry;
   this->is_attach = is_attach;
 
-  if (configuration.customFrameFormat)
-    SetFrameFormat(*configuration.customFrameFormat);
-  if (configuration.customThreadFormat)
-    SetThreadFormat(*configuration.customThreadFormat);
+  if (!configuration.customFrameFormat.empty())
+    SetFrameFormat(configuration.customFrameFormat);
+  if (!configuration.customThreadFormat.empty())
+    SetThreadFormat(configuration.customThreadFormat);
 }
 
 void DAP::SetFrameFormat(llvm::StringRef format) {

lldb/tools/lldb-dap/Handler/AttachRequestHandler.cpp

@@ -9,203 +9,135 @@
 #include "DAP.h"
 #include "EventHelper.h"
 #include "JSONUtils.h"
+#include "LLDBUtils.h"
+#include "Protocol/ProtocolRequests.h"
 #include "RequestHandler.h"
 #include "lldb/API/SBListener.h"
+#include "lldb/lldb-defines.h"
+#include "llvm/Support/Error.h"
 #include "llvm/Support/FileSystem.h"
 
+using namespace llvm;
+using namespace lldb_dap::protocol;
+
 namespace lldb_dap {
 
-// "AttachRequest": {
-//   "allOf": [ { "$ref": "#/definitions/Request" }, {
-//     "type": "object",
-//     "description": "Attach request; value of command field is 'attach'.",
-//     "properties": {
-//       "command": {
-//         "type": "string",
-//         "enum": [ "attach" ]
-//       },
-//       "arguments": {
-//         "$ref": "#/definitions/AttachRequestArguments"
-//       }
-//     },
-//     "required": [ "command", "arguments" ]
-//   }]
-// },
-// "AttachRequestArguments": {
-//   "type": "object",
-//   "description": "Arguments for 'attach' request.\nThe attach request has no
-//   standardized attributes."
-// },
-// "AttachResponse": {
-//   "allOf": [ { "$ref": "#/definitions/Response" }, {
-//     "type": "object",
-//     "description": "Response to 'attach' request. This is just an
-//     acknowledgement, so no body field is required."
-//   }]
-// }
-void AttachRequestHandler::operator()(const llvm::json::Object &request) const {
-  dap.is_attach = true;
-  llvm::json::Object response;
-  lldb::SBError error;
-  FillResponse(request, response);
-  lldb::SBAttachInfo attach_info;
-  const int invalid_port = 0;
-  const auto *arguments = request.getObject("arguments");
-  const lldb::pid_t pid =
-      GetInteger<uint64_t>(arguments, "pid").value_or(LLDB_INVALID_PROCESS_ID);
-  const auto gdb_remote_port =
-      GetInteger<uint64_t>(arguments, "gdb-remote-port").value_or(invalid_port);
-  const auto gdb_remote_hostname =
-      GetString(arguments, "gdb-remote-hostname").value_or("localhost");
-  if (pid != LLDB_INVALID_PROCESS_ID)
-    attach_info.SetProcessID(pid);
-  const auto wait_for = GetBoolean(arguments, "waitFor").value_or(false);
-  attach_info.SetWaitForLaunch(wait_for, false /*async*/);
-  dap.configuration.initCommands = GetStrings(arguments, "initCommands");
-  dap.configuration.preRunCommands = GetStrings(arguments, "preRunCommands");
-  dap.configuration.postRunCommands = GetStrings(arguments, "postRunCommands");
-  dap.configuration.stopCommands = GetStrings(arguments, "stopCommands");
-  dap.configuration.exitCommands = GetStrings(arguments, "exitCommands");
-  dap.configuration.terminateCommands =
-      GetStrings(arguments, "terminateCommands");
-  auto attachCommands = GetStrings(arguments, "attachCommands");
-  llvm::StringRef core_file = GetString(arguments, "coreFile").value_or("");
-  const uint64_t timeout_seconds =
-      GetInteger<uint64_t>(arguments, "timeout").value_or(30);
-  dap.stop_at_entry = core_file.empty()
-                          ? GetBoolean(arguments, "stopOnEntry").value_or(false)
-                          : true;
-  const llvm::StringRef debuggerRoot =
-      GetString(arguments, "debuggerRoot").value_or("");
-  dap.configuration.enableAutoVariableSummaries =
-      GetBoolean(arguments, "enableAutoVariableSummaries").value_or(false);
-  dap.configuration.enableSyntheticChildDebugging =
-      GetBoolean(arguments, "enableSyntheticChildDebugging").value_or(false);
-  dap.configuration.displayExtendedBacktrace =
-      GetBoolean(arguments, "displayExtendedBacktrace").value_or(false);
-  dap.configuration.commandEscapePrefix =
-      GetString(arguments, "commandEscapePrefix").value_or("`");
-  dap.configuration.program = GetString(arguments, "program");
-  dap.configuration.targetTriple = GetString(arguments, "targetTriple");
-  dap.configuration.platformName = GetString(arguments, "platformName");
-  dap.SetFrameFormat(GetString(arguments, "customFrameFormat").value_or(""));
-  dap.SetThreadFormat(GetString(arguments, "customThreadFormat").value_or(""));
+/// The `attach` request is sent from the client to the debug adapter to attach
+/// to a debuggee that is already running.
+///
+/// Since attaching is debugger/runtime specific, the arguments for this request
+/// are not part of this specification.
+Error AttachRequestHandler::Run(const AttachRequestArguments &args) const {
+  dap.SetConfiguration(args.configuration, true);
+  if (!args.coreFile.empty())
+    dap.stop_at_entry = true;
+
+  // If both pid and port numbers are specified.
+  if ((args.pid != LLDB_INVALID_PROCESS_ID) &&
+      (args.gdbRemotePort != LLDB_DAP_INVALID_PORT))
+    return make_error<DAPError>(
+        "pid and gdb-remote-port are mutually exclusive");
 
   PrintWelcomeMessage();
 
   // This is a hack for loading DWARF in .o files on Mac where the .o files
-  // in the debug map of the main executable have relative paths which require
-  // the lldb-dap binary to have its working directory set to that relative
-  // root for the .o files in order to be able to load debug info.
-  if (!debuggerRoot.empty())
-    llvm::sys::fs::set_current_path(debuggerRoot);
+  // in the debug map of the main executable have relative paths which
+  // require the lldb-dap binary to have its working directory set to that
+  // relative root for the .o files in order to be able to load debug info.
+  if (!dap.configuration.debuggerRoot.empty())
+    sys::fs::set_current_path(dap.configuration.debuggerRoot);
 
   // Run any initialize LLDB commands the user specified in the launch.json
-  if (llvm::Error err = dap.RunInitCommands()) {
-    response["success"] = false;
-    EmplaceSafeString(response, "message", llvm::toString(std::move(err)));
-    dap.SendJSON(llvm::json::Value(std::move(response)));
-    return;
-  }
+  if (llvm::Error err = dap.RunInitCommands())
+    return err;
 
-  SetSourceMapFromArguments(*arguments);
+  dap.ConfigureSourceMaps();
 
-  lldb::SBError status;
-  dap.SetTarget(dap.CreateTarget(status));
-  if (status.Fail()) {
-    response["success"] = llvm::json::Value(false);
-    EmplaceSafeString(response, "message", status.GetCString());
-    dap.SendJSON(llvm::json::Value(std::move(response)));
-    return;
-  }
+  lldb::SBError error;
+  lldb::SBTarget target = dap.CreateTarget(error);
+  if (error.Fail())
+    return ToError(error);
+
+  dap.SetTarget(target);
 
   // Run any pre run LLDB commands the user specified in the launch.json
-  if (llvm::Error err = dap.RunPreRunCommands()) {
-    response["success"] = false;
-    EmplaceSafeString(response, "message", llvm::toString(std::move(err)));
-    dap.SendJSON(llvm::json::Value(std::move(response)));
-    return;
-  }
+  if (Error err = dap.RunPreRunCommands())
+    return err;
 
-  if ((pid == LLDB_INVALID_PROCESS_ID || gdb_remote_port == invalid_port) &&
-      wait_for) {
+  if ((args.pid == LLDB_INVALID_PROCESS_ID ||
+       args.gdbRemotePort == LLDB_DAP_INVALID_PORT) &&
+      args.waitFor) {
     char attach_msg[256];
     auto attach_msg_len = snprintf(attach_msg, sizeof(attach_msg),
                                    "Waiting to attach to \"%s\"...",
                                    dap.target.GetExecutable().GetFilename());
-    dap.SendOutput(OutputType::Console,
-                   llvm::StringRef(attach_msg, attach_msg_len));
+    dap.SendOutput(OutputType::Console, StringRef(attach_msg, attach_msg_len));
   }
-  if (attachCommands.empty()) {
+
+  if (args.attachCommands.empty()) {
     // No "attachCommands", just attach normally.
     // Disable async events so the attach will be successful when we return from
     // the launch call and the launch will happen synchronously
     dap.debugger.SetAsync(false);
-    if (core_file.empty()) {
-      if ((pid != LLDB_INVALID_PROCESS_ID) &&
-          (gdb_remote_port != invalid_port)) {
-        // If both pid and port numbers are specified.
-        error.SetErrorString("The user can't specify both pid and port");
-      } else if (gdb_remote_port != invalid_port) {
+    if (args.coreFile.empty()) {
+      if (args.gdbRemotePort != LLDB_DAP_INVALID_PORT) {
         // If port is specified and pid is not.
         lldb::SBListener listener = dap.debugger.GetListener();
 
         // If the user hasn't provided the hostname property, default localhost
         // being used.
         std::string connect_url =
-            llvm::formatv("connect://{0}:", gdb_remote_hostname);
-        connect_url += std::to_string(gdb_remote_port);
-        dap.target.ConnectRemote(listener, connect_url.c_str(), "gdb-remote",
+            llvm::formatv("connect://{0}:", args.gdbRemoteHostname);
+        connect_url += std::to_string(args.gdbRemotePort);
+        dap.target.ConnectRemote(listener, connect_url.data(), "gdb-remote",
                                  error);
       } else {
         // Attach by process name or id.
+        lldb::SBAttachInfo attach_info;
+        if (!args.configuration.program.empty())
+          attach_info.SetExecutable(args.configuration.program.data());
+        if (args.pid != LLDB_INVALID_PROCESS_ID)
+          attach_info.SetProcessID(args.pid);
+        attach_info.SetWaitForLaunch(args.waitFor, false /*async*/);
         dap.target.Attach(attach_info, error);
       }
     } else
-      dap.target.LoadCore(core_file.data(), error);
+      dap.target.LoadCore(args.coreFile.data(), error);
     // Reenable async events
     dap.debugger.SetAsync(true);
   } else {
     // We have "attachCommands" that are a set of commands that are expected
     // to execute the commands after which a process should be created. If there
     // is no valid process after running these commands, we have failed.
-    if (llvm::Error err = dap.RunAttachCommands(attachCommands)) {
-      response["success"] = false;
-      EmplaceSafeString(response, "message", llvm::toString(std::move(err)));
-      dap.SendJSON(llvm::json::Value(std::move(response)));
-      return;
-    }
+    if (llvm::Error err = dap.RunAttachCommands(args.attachCommands))
+      return err;
+
     // The custom commands might have created a new target so we should use the
     // selected target after these commands are run.
     dap.target = dap.debugger.GetSelectedTarget();
 
     // Make sure the process is attached and stopped before proceeding as the
     // the launch commands are not run using the synchronous mode.
-    error = dap.WaitForProcessToStop(std::chrono::seconds(timeout_seconds));
+    error = dap.WaitForProcessToStop(dap.configuration.timeout);
   }
 
-  if (error.Success() && core_file.empty()) {
-    auto attached_pid = dap.target.GetProcess().GetProcessID();
-    if (attached_pid == LLDB_INVALID_PROCESS_ID) {
-      if (attachCommands.empty())
-        error.SetErrorString("failed to attach to a process");
-      else
-        error.SetErrorString("attachCommands failed to attach to a process");
-    }
-  }
+  if (error.Fail())
+    return ToError(error);
 
-  if (error.Fail()) {
-    response["success"] = llvm::json::Value(false);
-    EmplaceSafeString(response, "message", std::string(error.GetCString()));
-  } else {
-    dap.RunPostRunCommands();
-  }
+  if (args.coreFile.empty() && !dap.target.GetProcess().IsValid())
+    return make_error<DAPError>("failed to attach to process");
 
-  dap.SendJSON(llvm::json::Value(std::move(response)));
-  if (error.Success()) {
+  dap.RunPostRunCommands();
+
+  return Error::success();
+}
+
+void AttachRequestHandler::PostRun() const {
+  if (dap.target.GetProcess().IsValid()) {
     SendProcessEvent(dap, Attach);
-    dap.SendJSON(CreateEventObject("initialized"));
   }
+
+  dap.SendJSON(CreateEventObject("initialized"));
 }
 
 } // namespace lldb_dap

lldb/tools/lldb-dap/Handler/InitializeRequestHandler.cpp

@@ -277,7 +277,7 @@ static void EventThreadFunction(DAP &dap) {
 }
 
 /// Initialize request; value of command field is 'initialize'.
-llvm::Expected<InitializeResponseBody> InitializeRequestHandler::Run(
+llvm::Expected<InitializeResponse> InitializeRequestHandler::Run(
     const InitializeRequestArguments &arguments) const {
   dap.clientFeatures = arguments.supportedFeatures;
 

lldb/tools/lldb-dap/Handler/LaunchRequestHandler.cpp

@@ -24,7 +24,6 @@ namespace lldb_dap {
 Error LaunchRequestHandler::Run(const LaunchRequestArguments &arguments) const {
   dap.SetConfiguration(arguments.configuration, /*is_attach=*/false);
   dap.last_launch_request = arguments;
-  dap.stop_at_entry = arguments.stopOnEntry;
 
   if (!arguments.launchCommands.empty() && arguments.runInTerminal)
     return make_error<DAPError>(
@@ -36,9 +35,8 @@ Error LaunchRequestHandler::Run(const LaunchRequestArguments &arguments) const {
   // in the debug map of the main executable have relative paths which
   // require the lldb-dap binary to have its working directory set to that
   // relative root for the .o files in order to be able to load debug info.
-  const std::string debugger_root = dap.configuration.debuggerRoot.value_or("");
-  if (!debugger_root.empty())
-    sys::fs::set_current_path(debugger_root);
+  if (!dap.configuration.debuggerRoot.empty())
+    sys::fs::set_current_path(dap.configuration.debuggerRoot);
 
   // Run any initialize LLDB commands the user specified in the launch.json.
   // This is run before target is created, so commands can't do anything with