rk3506-ubuntu

Ubuntu 24.04.3 OS image builder for various RK3506 SBC

(based off the Luckfox Lyra SDK when it could still build Ubuntu 22.04 OS Images but further modified to include updated Ubuntu 24.04.3 OS and support for the later Luckfox Lyra SBC boards with ability to run luckfox-config)

BOARD	Tested OK with luckfox-config
Luckfox Lyra	Yes
Luckfox Lyra PLUS	Yes
Luckfox Lyra Zero W	Yes
Luckfox Lyra Pi W emmc	Yes
ArmSoM Forge 1	Still need to modify luckfox-config for the availabe RM_IO gpio for this board - see below *

Supported Boards

Board Name	SD/EMMC	Defconfig
Luckfox Lyra	SDCard	4. luckfox_lyra_ubuntu_sdmmc
Luckfox Lyra PLUS	SDCard	3. luckfox_lyra_plus_ubuntu_sdmmc
Luckfox Lyra Ultra W	eMMC	5. luckfox_lyra_ultra-w_ubuntu_emmc
Luckfox Zero W	SDCard	6. luckfox_lyra_zero-w_ubuntu_sdmmc
Luckfox Lyra Pi W	SDCard	2. luckfox_lyra_pi-w_ubuntu_sdmmc
Luckfox Lyra Pi W	eMMC	1. luckfox_lyra_pi-w_ubuntu_emmc
ArmSom Forge (BPI Forge1)	SDCard	7. rk3506-armsom-forge1_ubuntu_sdmmc

Default User Login Credentials

User:     root
Password: root

User:     lyra
Password: luckfox

ADB shell requires no password and can be used to set or change existing passwords

IMPORTANT NOTE FOR LYRA BOARDS WITH WIFI

adb shell "cd /home/lyra/aic800/ && make install; reboot"

#test
adb shell nmcli dev wifi list

#connect
nmtui

Luckfox Lyra boards Specifications

Luckfox Lyra pinout

https://wiki.luckfox.com/Luckfox-Lyra/Pinout/

Forge1 RM_IO pinout

Board cator more for CanBus/Flexibus use than RM_IO gpio

Key: Green=GPIO, Blue=RM_IO, Red=Power, Black=GND

root@forge1:~# cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 0-31, parent: platform/ff940000.gpio, gpio0:
 gpio-1   (                    |vcc3v3-lcd0-n       ) out hi 
 gpio-3   (                    |cd                  ) in  lo IRQ ACTIVE LOW
 gpio-24  (                    |hp-det              ) in  lo IRQ 

gpiochip1: GPIOs 32-63, parent: platform/ff870000.gpio, gpio1:
 gpio-54  (                    |spk-con             ) out lo 
 gpio-56  (                    |vcc5v0-otg1-regulato) out hi 

gpiochip2: GPIOs 64-95, parent: platform/ff1c0000.gpio, gpio2:

gpiochip3: GPIOs 96-127, parent: platform/ff1d0000.gpio, gpio3:

gpiochip4: GPIOs 128-159, parent: platform/ff1e0000.gpio, gpio4:
 gpio-139 (                    |rockchip:work_led:sy) out lo

cat /sys/firmware/devicetree/base/model
Rockchip RK3506J(BGA) ArmSoM Forge1

gpiodetect 
gpiochip0 [gpio0] (32 lines)
gpiochip1 [gpio1] (32 lines)
gpiochip2 [gpio2] (32 lines)
gpiochip3 [gpio3] (32 lines)
gpiochip4 [gpio4] (32 lines)

gpioinfo 
gpiochip0 - 32 lines:
        line   0:      unnamed       unused   input  active-high 
        line   1:      unnamed "vcc3v3-lcd0-n" output active-high [used]
        line   2:      unnamed       unused   input  active-high 
        line   3:      unnamed         "cd"   input   active-low [used]
        line   4:      unnamed       unused   input  active-high 
        line   5:      unnamed       unused   input  active-high 
        line   6:      unnamed       unused   input  active-high 
        line   7:      unnamed       unused   input  active-high 
        line   8:      unnamed       unused   input  active-high 
        line   9:      unnamed       unused   input  active-high 
        line  10:      unnamed       unused   input  active-high 
        line  11:      unnamed       unused   input  active-high 
        line  12:      unnamed       unused   input  active-high 
        line  13:      unnamed       unused   input  active-high 
        line  14:      unnamed       unused   input  active-high 
        line  15:      unnamed       unused   input  active-high 
        line  16:      unnamed       unused   input  active-high 
        line  17:      unnamed       unused   input  active-high 
        line  18:      unnamed       unused  output  active-high 
        line  19:      unnamed       unused   input  active-high 
        line  20:      unnamed       unused   input  active-high 
        line  21:      unnamed       unused   input  active-high 
        line  22:      unnamed       unused   input  active-high 
        line  23:      unnamed       unused   input  active-high 
        line  24:      unnamed     "hp-det"   input  active-high [used]
        line  25:      unnamed       unused   input  active-high 
        line  26:      unnamed       unused   input  active-high 
        line  27:      unnamed       unused   input  active-high 
        line  28:      unnamed       unused   input  active-high 
        line  29:      unnamed       unused   input  active-high 
        line  30:      unnamed       unused   input  active-high 
        line  31:      unnamed       unused   input  active-high 
gpiochip1 - 32 lines:
        line   0:      unnamed       unused   input  active-high 
        line   1:      unnamed       unused   input  active-high 
        line   2:      unnamed       unused   input  active-high 
        line   3:      unnamed       unused   input  active-high 
        line   4:      unnamed       unused   input  active-high 
        line   5:      unnamed       unused   input  active-high 
        line   6:      unnamed       unused   input  active-high 
        line   7:      unnamed       unused   input  active-high 
        line   8:      unnamed       unused   input  active-high 
        line   9:      unnamed       unused   input  active-high 
        line  10:      unnamed       unused   input  active-high 
        line  11:      unnamed       unused   input  active-high 
        line  12:      unnamed       unused   input  active-high 
        line  13:      unnamed       unused   input  active-high 
        line  14:      unnamed       unused   input  active-high 
        line  15:      unnamed       unused   input  active-high 
        line  16:      unnamed       unused   input  active-high 
        line  17:      unnamed       unused   input  active-high 
        line  18:      unnamed       unused   input  active-high 
        line  19:      unnamed       unused   input  active-high 
        line  20:      unnamed       unused   input  active-high 
        line  21:      unnamed       unused   input  active-high 
        line  22:      unnamed    "spk-con"  output  active-high [used]
        line  23:      unnamed       unused  output  active-high 
        line  24:      unnamed "vcc5v0-otg1-regulator" output active-high [used]
        line  25:      unnamed       unused   input  active-high 
        line  26:      unnamed       unused   input  active-high 
        line  27:      unnamed       unused   input  active-high 
        line  28:      unnamed       unused   input  active-high 
        line  29:      unnamed       unused   input  active-high 
        line  30:      unnamed       unused   input  active-high 
        line  31:      unnamed       unused   input  active-high 
gpiochip2 - 32 lines:
        line   0:      unnamed       unused   input  active-high 
        line   1:      unnamed       unused   input  active-high 
        line   2:      unnamed       unused   input  active-high 
        line   3:      unnamed       unused   input  active-high 
        line   4:      unnamed       unused   input  active-high 
        line   5:      unnamed       unused   input  active-high 
        line   6:      unnamed       unused   input  active-high 
        line   7:      unnamed       unused   input  active-high 
        line   8:      unnamed       unused   input  active-high 
        line   9:      unnamed       unused   input  active-high 
        line  10:      unnamed       unused   input  active-high 
        line  11:      unnamed       unused   input  active-high 
        line  12:      unnamed       unused   input  active-high 
        line  13:      unnamed       unused   input  active-high 
        line  14:      unnamed       unused   input  active-high 
        line  15:      unnamed       unused   input  active-high 
        line  16:      unnamed       unused   input  active-high 
        line  17:      unnamed       unused   input  active-high 
        line  18:      unnamed       unused   input  active-high 
        line  19:      unnamed       unused   input  active-high 
        line  20:      unnamed       unused   input  active-high 
        line  21:      unnamed       unused   input  active-high 
        line  22:      unnamed       unused   input  active-high 
        line  23:      unnamed       unused   input  active-high 
        line  24:      unnamed       unused   input  active-high 
        line  25:      unnamed       unused   input  active-high 
        line  26:      unnamed       unused   input  active-high 
        line  27:      unnamed       unused   input  active-high 
        line  28:      unnamed       unused   input  active-high 
        line  29:      unnamed       unused   input  active-high 
        line  30:      unnamed       unused   input  active-high 
        line  31:      unnamed       unused   input  active-high 
gpiochip3 - 32 lines:
        line   0:      unnamed       unused   input  active-high 
        line   1:      unnamed       unused   input  active-high 
        line   2:      unnamed       unused   input  active-high 
        line   3:      unnamed       unused   input  active-high 
        line   4:      unnamed       unused   input  active-high 
        line   5:      unnamed       unused   input  active-high 
        line   6:      unnamed       unused   input  active-high 
        line   7:      unnamed       unused   input  active-high 
        line   8:      unnamed       unused   input  active-high 
        line   9:      unnamed       unused   input  active-high 
        line  10:      unnamed       unused   input  active-high 
        line  11:      unnamed       unused   input  active-high 
        line  12:      unnamed       unused   input  active-high 
        line  13:      unnamed       unused   input  active-high 
        line  14:      unnamed       unused   input  active-high 
        line  15:      unnamed       unused   input  active-high 
        line  16:      unnamed       unused   input  active-high 
        line  17:      unnamed       unused   input  active-high 
        line  18:      unnamed       unused   input  active-high 
        line  19:      unnamed       unused   input  active-high 
        line  20:      unnamed       unused   input  active-high 
        line  21:      unnamed       unused   input  active-high 
        line  22:      unnamed       unused   input  active-high 
        line  23:      unnamed       unused   input  active-high 
        line  24:      unnamed       unused   input  active-high 
        line  25:      unnamed       unused   input  active-high 
        line  26:      unnamed       unused   input  active-high 
        line  27:      unnamed       unused   input  active-high 
        line  28:      unnamed       unused   input  active-high 
        line  29:      unnamed       unused   input  active-high 
        line  30:      unnamed       unused   input  active-high 
        line  31:      unnamed       unused   input  active-high 
gpiochip4 - 32 lines:
        line   0:      unnamed       unused   input  active-high 
        line   1:      unnamed       unused   input  active-high 
        line   2:      unnamed       unused   input  active-high 
        line   3:      unnamed       unused   input  active-high 
        line   4:      unnamed       unused   input  active-high 
        line   5:      unnamed       unused   input  active-high 
        line   6:      unnamed       unused   input  active-high 
        line   7:      unnamed       unused   input  active-high 
        line   8:      unnamed       unused   input  active-high 
        line   9:      unnamed       unused   input  active-high 
        line  10:      unnamed       unused   input  active-high 
        line  11:      unnamed "rockchip:work_led:system" output active-high [used]
        line  12:      unnamed       unused   input  active-high 
        line  13:      unnamed       unused   input  active-high 
        line  14:      unnamed       unused   input  active-high 
        line  15:      unnamed       unused   input  active-high 
        line  16:      unnamed       unused   input  active-high 
        line  17:      unnamed       unused   input  active-high 
        line  18:      unnamed       unused   input  active-high 
        line  19:      unnamed       unused   input  active-high 
        line  20:      unnamed       unused   input  active-high 
        line  21:      unnamed       unused   input  active-high 
        line  22:      unnamed       unused   input  active-high 
        line  23:      unnamed       unused   input  active-high 
        line  24:      unnamed       unused   input  active-high 
        line  25:      unnamed       unused   input  active-high 
        line  26:      unnamed       unused   input  active-high 
        line  27:      unnamed       unused   input  active-high 
        line  28:      unnamed       unused   input  active-high 
        line  29:      unnamed       unused   input  active-high 
        line  30:      unnamed       unused   input  active-high 
        line  31:      unnamed       unused   input  active-high

Example Hardware running DSI 5" 720x1280 display and Luckfox Lyra Pi

Front

Back

Display https://www.waveshare.com/5-dsi-touch-a.htm

XFCE4 Desktop

SDK Usage

[prepare]
Use either a docker Ubuntu 22.04 or Ubuntu 22.04 environment

Install dependency packages.

sudo apt update

sudo apt-get update && sudo apt-get install git ssh make gcc libssl-dev \
liblz4-tool expect expect-dev g++ patchelf chrpath gawk texinfo chrpath \
diffstat binfmt-support qemu-user-static live-build bison flex fakeroot \
cmake gcc-multilib g++-multilib unzip device-tree-compiler ncurses-dev \
libgucharmap-2-90-dev bzip2 expat gpgv2 cpp-aarch64-linux-gnu libgmp-dev \
libmpc-dev bc python-is-python3 python2 

sudo ln -sf /usr/bin/python2 /usr/bin/python 

[build instructions]
git clone https://github.com/markbirss/rk3506-ubuntu.git

cd rk3506-ubuntu/device/rockchip/.chips/rk3506
ln -s .chips/rk3506 ../../rk3506
ln -s .chips/rk3506 ../../.chip
cd ../../../../

#sha256sum
#d6f58545b0b9c679665a8ff58dd2a7a75aa2b2648871e4be5a2c2288b4261545  ubuntu_24.04.3.tar.gz

git clone https://github.com/markbirss/ubuntu_24.04.3.git
cd ubuntu_24.04.3
rm -fr .git
7z x ubuntu_24.04.3.7z.001
sha256sum ubuntu_24.04.3.tar.gz

rm -f ubuntu_24.04.3.7z.*

mv ubuntu_24.04.3.tar.gz ../
cd ../
mkdir ubuntu
mv ubuntu_24.04.3.tar.gz ubuntu

#./build.sh lunch
# sudo ./build.sh
# sudo ./rkflash.sh update

Docker Notes

mkdir ~/sdk

docker run --platform linux/amd64 -it -v ~/sdk:/sdk --rm ubuntu:22.04 bash

apt update;

apt -y dist-upgrade;

apt-get -y install git ssh make gcc libssl-dev \
liblz4-tool expect expect-dev g++ patchelf chrpath gawk texinfo chrpath \
diffstat binfmt-support qemu-user-static live-build bison flex fakeroot \
cmake gcc-multilib g++-multilib unzip device-tree-compiler ncurses-dev \
libgucharmap-2-90-dev bzip2 expat gpgv2 cpp-aarch64-linux-gnu libgmp-dev \
libmpc-dev bc python-is-python3 python2 rsync sudo bsdmainutils nano;

ln -sf /usr/bin/python2 /usr/bin/python

#1. Africa
#Geographic area: 1

#25. Johannesburg
#Time zone: 24

adduser user

usermod -aG sudo user
su user

Support my work and consider buying me a coffee

https://buymeacoffee.com/mark.birss

Name		Name	Last commit message	Last commit date
Latest commit History 48 Commits
app		app
buildroot		buildroot
device/rockchip		device/rockchip
docs		docs
external		external
hal		hal
kernel-6.1		kernel-6.1
prebuilts/gcc/linux-x86/arm		prebuilts/gcc/linux-x86/arm
rkbin		rkbin
rtos		rtos
tools		tools
u-boot		u-boot
yocto		yocto
Makefile		Makefile
README.md		README.md
build.sh		build.sh
kernel		kernel
rkflash.sh		rkflash.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

rk3506-ubuntu

IMPORTANT NOTE FOR LYRA BOARDS WITH WIFI

About

Uh oh!

Releases

Packages

Languages

markbirss/rk3506-ubuntu

Folders and files

Latest commit

History

Repository files navigation

rk3506-ubuntu

IMPORTANT NOTE FOR LYRA BOARDS WITH WIFI

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages