[BUG] LA Labels not correctly aligned

[Philipp-3]

Hi, I run v0.6.2 on a DHO924S. Such a nice improvement to the original firmware.
I found a small bug on the labeling of the LA channels: they are not aligned correct, particularly dramatic when size is set to small or in fullscreen-mode. (Was the same with v0.5.1)
Maybe this could be fixed in future versions?

[mriscoc]

Hi, all those channels are in"0" ? could you set some of them to "1"? Could you check if the original application has the same issue?

[Philipp-3]

Hello Miguel, original application didn't have this issue, checked on a original firmware scope at work.
Just a guess, it could have something to do with the fact that the “taskbar” has become narrower.
In Picture below D3 is on probe-cal-signal, D8 and D10 are high, rest is low. The red channel is D15 (there is allways one in red, the one which was selected.)
I use an own build LA-adapter with a pcb from an ebay guy called "atomicfrenzy", he sold the naked pcb for a really fair price to me. If you have no LA-adapter, for emulation you can just put 100Ohms between pins 1 an 2 on the LA-connector. (Schematics are also on ebay)

[mriscoc]

I have a DHO804 so it is not possible for me to do the proper tests, but I will check how to solve the issue, please post if it is possible for you, the same signals configuration but with the original application.

[Philipp-3]

Hi, yes sure, I'll post images of this conifg on the original app. Please give me a week, then I can do the test on a second oszi and don't have to downgrade mine. I'll take a several screenshots of different configs, small and medium size, and with testsignal on D15, that you have the full range of the used area for D0-D15.