arm64: dts: qcom: msm8916-wiko-chuppito: add initial devicetree

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -1730,6 +1730,8 @@ patternProperties:
     description: Winsen Corp.
   "^winstar,.*":
     description: Winstar Display Corp.
+  "^wiko,.*":
+    description: Wiko SAS
   "^wirelesstag,.*":
     description: Wireless Tag (qiming yunduan)
   "^wits,.*":

arch/arm64/boot/dts/qcom/Makefile

@@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-vivo-y21l.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wiko-chuppito.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86518.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt86528.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb

arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts

@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+	model = "Wiko Pulp 4G";
+	compatible = "wiko,chuppito", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8916_pwm 0 100000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&button_backlight_default>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+		reset-gpios = <&tlmm 120 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&mag_reset_default>;
+		pinctrl-names = "default";
+		mount-matrix = "1",  "0", "0",
+			       "0", "1", "0",
+			       "0",  "0", "1";
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3310"; // is it 3310?
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&proximity_int_default>;
+		pinctrl-names = "default";
+	};
+
+	imu@68 {
+		compatible = "invensense,mpu6880";
+		reg = <0x68>;
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&imu_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "0",  "-1", "0",
+			       "-1", "0", "0",
+			       "0",  "0", "-1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	rmi4@39 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x39>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-1 = <&touchscreen_suspend>;
+		pinctrl-names = "default"; //, "suspend";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		syna,startup-delay-ms = <100>;
+		syna,reset-delay-ms = <160>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	panel@0 {
+		compatible = "wiko,chuppito-ili9881c";
+		reg = <0x0>;
+		backlight = <&backlight>;
+		reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&panel_default>;
+		pinctrl-1 = <&panel_suspend>;
+		pinctrl-names = "default", "suspend";
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	qcom,dsi-phy-regulator-ldo-mode;
+};
+
+&pm8916_l6 {
+	regulator-always-on;
+};
+
+&pm8916_pwm {
+	pinctrl-0 = <&pwm_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+		regulator-always-on;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	button_backlight_default: button-backlight-default-state {
+		pins = "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	// button_backlight_off: button-backlight-off-state {
+	//	pins = "gpio119";
+	//	function = "gpio";
+	//	drive-strength = <2>;
+	//	bias-disable;
+	//	output-low;
+	// };
+
+	panel_default: panel-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	panel_suspend: panel-suspend-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+		output-low;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	proximity_int_default: proximity-int-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	imu_int_default: imu-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio120";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	proximity_int_default: proximity-int-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	touchscreen_suspend: touchscreen-suspend-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&pm8916_mpps {
+	pwm_out: mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+		power-source = <PM8916_MPP_VPH>;
+		output-low;
+		qcom,dtest = <1>;
+	};
+};