[nrf fromtree] samples: tests: Add support to tests on nrf54l15 DK

samples/bluetooth/beacon/sample.yaml

@@ -8,13 +8,14 @@ tests:
       - qemu_x86
       - nrf51dk/nrf51822
       - nrf52dk/nrf52832
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf54l15pdk/nrf54l15/cpuapp
     tags: bluetooth
     integration_platforms:
       - qemu_cortex_m3
       - nrf51dk/nrf51822
       - nrf52dk/nrf52832
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
   sample.bluetooth.beacon-coex:
     extra_args:
       - CONF_FILE="prj-coex.conf"

tests/drivers/watchdog/wdt_error_cases/boards/nrf54l15pdk_nrf54l15_cpuapp.overlay → samples/bluetooth/hci_uart/boards/nrf54l15dk_nrf54l15_cpuapp.overlay

@@ -4,6 +4,9 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-&wdt31 {
+&uart20 {
+	compatible = "nordic,nrf-uarte";
+	current-speed = <1000000>;
 	status = "okay";
+	hw-flow-control;
 };

samples/bluetooth/hci_uart/boards/nrf54l15dk_nrf54l15_cpuapp_df.overlay

@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+&uart20 {
+	compatible = "nordic,nrf-uarte";
+	current-speed = <1000000>;
+	status = "okay";
+	hw-flow-control;
+};
+
+&radio {
+	status = "okay";
+	/* This is an example number of antennas that may be available
+	 * on antenna matrix board.
+	 */
+	dfe-antenna-num = <10>;
+	/* This is an example switch pattern that will be used to set an
+	 * antenna for Tx PDU (period before start of Tx CTE).
+	 */
+	dfe-pdu-antenna = <0x0>;
+
+	/* These are example GPIO pin numbers that are provided to
+	 * Radio peripheral. The pins will be acquired by Radio to
+	 * drive antenna switching when AoD is enabled.
+	 */
+	dfegpio0-gpios = <&gpio1 4 0>;
+	dfegpio1-gpios = <&gpio1 5 0>;
+	dfegpio2-gpios = <&gpio1 6 0>;
+	dfegpio3-gpios = <&gpio1 7 0>;
+};

samples/bluetooth/hci_uart/sample.yaml

@@ -68,6 +68,17 @@ tests:
       - uart
       - bluetooth
   sample.bluetooth.hci_uart.nrf54l15.all:
+    harness: bluetooth
+    platform_allow: nrf54l15dk/nrf54l15/cpuapp
+    integration_platforms:
+      - nrf54l15dk/nrf54l15/cpuapp
+    extra_args:
+      - OVERLAY_CONFIG=overlay-all-bt_ll_sw_split.conf
+      - DTC_OVERLAY_FILE=./boards/nrf54l15dk_nrf54l15_cpuapp_df.overlay
+    tags:
+      - uart
+      - bluetooth
+  sample.bluetooth.hci_uart.nrf54l15pdk.all:
     harness: bluetooth
     platform_allow: nrf54l15pdk/nrf54l15/cpuapp
     integration_platforms:

samples/bluetooth/peripheral_hr/sample.yaml

@@ -13,6 +13,7 @@ tests:
       - nrf52dk/nrf52832
       - nrf52840dk/nrf52840
       - nrf5340dk/nrf5340/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf54l15pdk/nrf54l15/cpuapp
     integration_platforms:
       - qemu_cortex_m3
@@ -22,7 +23,7 @@ tests:
       - nrf52dk/nrf52832
       - nrf52840dk/nrf52840
       - nrf5340dk/nrf5340/cpuapp
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     tags: bluetooth
   sample.bluetooth.peripheral_hr.minimal:
     harness: bluetooth

samples/boards/nordic/system_off/sample.yaml

@@ -8,7 +8,7 @@ tests:
     integration_platforms:
       - nrf52840dk/nrf52840
     platform_allow:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf52840dk/nrf52840
       - nrf52dk/nrf52832
       - nrf51dk/nrf51822
@@ -22,10 +22,10 @@ tests:
     extra_configs:
       - CONFIG_APP_USE_NRF_RETENTION=y
   sample.boards.nrf.system_off.retained_mem:
-    extra_args: DTC_OVERLAY_FILE="boards/nrf54l15pdk_nrf54l15_cpuapp_retained_mem.overlay"
+    extra_args: DTC_OVERLAY_FILE="boards/nrf54l15dk_nrf54l15_cpuapp_retained_mem.overlay"
     build_only: true
     platform_allow:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     extra_configs:
       - CONFIG_APP_USE_RETAINED_MEM=y
       - CONFIG_RETAINED_MEM=y

samples/drivers/adc/adc_dt/sample.yaml

@@ -15,7 +15,7 @@ tests:
       - stm32h735g_disco
       - nrf51dk/nrf51822
       - nrf52840dk/nrf52840
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf54h20dk/nrf54h20/cpuapp
       - mec172xevb_assy6906
       - gd32f350r_eval

samples/drivers/adc/adc_sequence/sample.yaml

@@ -9,7 +9,7 @@ tests:
       - cy8cproto_063_ble
       - cy8cproto_062_4343w
       - nrf52840dk/nrf52840
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf54h20dk/nrf54h20/cpuapp
       - ucans32k1sic
     integration_platforms:

samples/drivers/mbox/remote/boards/nrf54l15dk_nrf54l15_cpuflpr_xip.overlay

@@ -0,0 +1,24 @@
+/*
+ * Copyright 2024 Nordic Semiconductor ASA
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/ {
+	mbox-consumer {
+		compatible = "vnd,mbox-consumer";
+		mboxes = <&cpuflpr_vevif_rx 21>, <&cpuflpr_vevif_tx 20>;
+		mbox-names = "rx", "tx";
+	};
+};
+
+&cpuflpr_vevif_rx {
+	status = "okay";
+};
+
+&cpuflpr_vevif_tx {
+	status = "okay";
+};
+
+&uart30 {
+	/delete-property/ hw-flow-control;
+};

samples/drivers/mbox/sample.yaml

@@ -85,9 +85,9 @@ tests:
 
   sample.drivers.mbox.nrf54l15:
     platform_allow:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     integration_platforms:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     extra_args:
       mbox_SNIPPET=nordic-flpr
     sysbuild: true
@@ -96,14 +96,14 @@ tests:
       type: multi_line
       ordered: false
       regex:
-        - "Ping \\(on channel 16\\)"
-        - "Pong \\(on channel 15\\)"
+        - "Ping \\(on channel 21\\)"
+        - "Pong \\(on channel 20\\)"
 
   sample.drivers.mbox.nrf54l15_no_multithreading:
     platform_allow:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     integration_platforms:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     extra_args:
       mbox_SNIPPET=nordic-flpr
       mbox_CONFIG_MULTITHREADING=n
@@ -114,14 +114,14 @@ tests:
       type: multi_line
       ordered: false
       regex:
-        - "Ping \\(on channel 16\\)"
-        - "Pong \\(on channel 15\\)"
+        - "Ping \\(on channel 21\\)"
+        - "Pong \\(on channel 20\\)"
 
   sample.drivers.mbox.nrf54l15_remote_no_multithreading:
     platform_allow:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     integration_platforms:
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
     extra_args:
       mbox_SNIPPET=nordic-flpr
       remote_CONFIG_MULTITHREADING=n
@@ -131,5 +131,5 @@ tests:
       type: multi_line
       ordered: false
       regex:
-        - "Ping \\(on channel 16\\)"
-        - "Pong \\(on channel 15\\)"
+        - "Ping \\(on channel 21\\)"
+        - "Pong \\(on channel 20\\)"

samples/sensor/qdec/sample.yaml

@@ -41,12 +41,12 @@ tests:
     platform_allow:
       - nrf52840dk/nrf52840
       - nrf5340dk/nrf5340/cpuapp
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf54h20dk/nrf54h20/cpuapp
     integration_platforms:
       - nrf52840dk/nrf52840
       - nrf5340dk/nrf5340/cpuapp
-      - nrf54l15pdk/nrf54l15/cpuapp
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf54h20dk/nrf54h20/cpuapp
     harness_config:
       fixture: gpio_loopback

samples/subsys/fs/fs_sample/boards/nrf54l15dk_nrf54l15_cpuapp.conf

@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2024 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+CONFIG_DISK_DRIVERS=y
+CONFIG_DISK_DRIVER_FLASH=y
+# There may be no files on internal SoC flash, so this Kconfig
+# options has ben enabled to create some if listing does not
+# find in the first place.
+CONFIG_FS_SAMPLE_CREATE_SOME_ENTRIES=y

samples/subsys/fs/fs_sample/boards/nrf54l15dk_nrf54l15_cpuapp.overlay

@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/* Because FAT FS needs at least 64kiB partition and default
+ * storage_partition is 36kiB for this board, we need to reorganize
+ * partitions to get at least 64KiB.
+ */
+/delete-node/ &slot0_partition;
+/delete-node/ &slot1_partition;
+/delete-node/ &slot0_ns_partition;
+/delete-node/ &slot1_ns_partition;
+/delete-node/ &storage_partition;
+
+&cpuapp_rram {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		slot0_partition: parition@10000 {
+			reg = <0x00010000 DT_SIZE_K(300)>;
+		};
+		slot1_partition: partition@5b000 {
+			reg = <0x0005b000 DT_SIZE_K(300)>;
+		};
+
+		storage_partition: partition@a6000 {
+			label = "storage";
+			reg = <0x000a6000 DT_SIZE_K(128)>;
+		};
+	};
+};
+
+/ {
+	msc_disk0 {
+		status="okay";
+		compatible = "zephyr,flash-disk";
+		partition = <&storage_partition>;
+		disk-name = "SD";
+		cache-size = <512>;
+	};
+};

samples/subsys/fs/fs_sample/sample.yaml

@@ -58,6 +58,9 @@ tests:
   sample.filesystem.fat_fs.nrf54l15pdk:
     build_only: true
     platform_allow: nrf54l15pdk/nrf54l15/cpuapp
+  sample.filesystem.fat_fs.nrf54l15dk:
+    build_only: true
+    platform_allow: nrf54l15dk/nrf54l15/cpuapp
   sample.filesystem.fat_fs.nrf52840dk_nrf52840.qspi:
     build_only: true
     platform_allow: nrf52840dk/nrf52840

samples/subsys/fs/littlefs/sample.yaml

@@ -24,6 +24,7 @@ tests:
       - stm32f746g_disco
       - stm32h747i_disco/stm32h747xx/m7
       - stm32h750b_dk
+      - nrf54l15dk/nrf54l15/cpuapp
       - nrf54l15pdk/nrf54l15/cpuapp
       - frdm_ke17z
       - frdm_ke17z512

samples/subsys/ipc/ipc_service/icmsg/CMakeLists.txt

@@ -11,6 +11,7 @@ find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
 if(NOT CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP AND
     NOT CONFIG_BOARD_NRF5340BSIM_NRF5340_CPUAPP AND
     NOT CONFIG_BOARD_STM32H747I_DISCO AND
+    NOT CONFIG_BOARD_NRF54L15DK_NRF54L15_CPUAPP AND
     NOT CONFIG_BOARD_NRF54L15PDK_NRF54L15_CPUAPP)
   message(FATAL_ERROR "${BOARD} is not supported for this sample")
 endif()

samples/subsys/ipc/ipc_service/icmsg/Kconfig.sysbuild

@@ -9,4 +9,5 @@ string
 	default "nrf5340dk/nrf5340/cpunet" if $(BOARD) = "nrf5340dk"
 	default "nrf5340bsim/nrf5340/cpunet" if $(BOARD) = "nrf5340bsim"
 	default "nrf54l15pdk/nrf54l15/cpuflpr" if $(BOARD) = "nrf54l15pdk"
+	default "nrf54l15dk/nrf54l15/cpuflpr" if $(BOARD) = "nrf54l15dk"
 	default "stm32h747i_disco/stm32h747xx/m4" if $(BOARD) = "stm32h747i_disco"

samples/subsys/ipc/ipc_service/icmsg/boards/nrf54l15dk_nrf54l15_cpuapp.overlay

@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/ {
+	soc {
+		reserved-memory {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			sram_rx: memory@20018000 {
+				reg = <0x20018000 0x0800>;
+			};
+
+			sram_tx: memory@20020000 {
+				reg = <0x20020000 0x0800>;
+			};
+		};
+	};
+
+	ipc {
+		ipc0: ipc0 {
+			compatible = "zephyr,ipc-icmsg";
+			tx-region = <&sram_tx>;
+			rx-region = <&sram_rx>;
+			mboxes = <&cpuapp_vevif_rx 20>, <&cpuapp_vevif_tx 21>;
+			mbox-names = "rx", "tx";
+			status = "okay";
+		};
+	};
+};
+
+&cpuapp_vevif_rx {
+	status = "okay";
+};
+
+&cpuapp_vevif_tx {
+	status = "okay";
+};

samples/subsys/ipc/ipc_service/icmsg/boards/nrf54l15pdk_nrf54l15_cpuapp_icbmsg.overlay → samples/subsys/ipc/ipc_service/icmsg/boards/nrf54l15dk_nrf54l15_cpuapp_icbmsg.overlay

@@ -27,7 +27,7 @@
 			rx-region = <&sram_rx>;
 			tx-blocks = <16>;
 			rx-blocks = <18>;
-			mboxes = <&cpuapp_vevif_rx 15>, <&cpuapp_vevif_tx 16>;
+			mboxes = <&cpuapp_vevif_rx 20>, <&cpuapp_vevif_tx 21>;
 			mbox-names = "rx", "tx";
 			status = "okay";
 		};