[nrf fromtree] samples: drivers: Add spis_wakeup sample

samples/boards/nordic/spis_wakeup/CMakeLists.txt

@@ -0,0 +1,18 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+# SPDX-License-Identifier: Apache-2.0
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+
+if(NOT SYSBUILD)
+	message(FATAL_ERROR
+		" This is a multi-image application that should be built using sysbuild.\n"
+		" Add --sysbuild argument to west build command to prepare all the images.")
+endif()
+
+project(spis_wakeup)
+
+target_sources(app PRIVATE src/main.c)

samples/boards/nordic/spis_wakeup/README.rst

@@ -0,0 +1,73 @@
+.. zephyr:code-sample:: spis-wakeup
+   :name: SPIS wake up
+   :relevant-api: spi_interface
+
+   Reduce current consumption by handling the wake line while using an SPIS.
+
+Overview
+********
+
+Sample showing how to use the additional wake line in nrf-spis driver. The application, configured
+as a SPIS, is put to sleep while waiting for an SPI transmission. An external device (other core in
+this sample) working as a SPIM and also handling the wake line wakes the application up just before
+the transmission starts. To simulate two separate devices the Nordic Semiconductor nRF54H20 DK has
+been used and SPIS / SPIM drivers are controlled by two independent cores:
+
+- nrf54h20dk/nrf54h20/cpuapp works as a SPIS controller device
+- nrf54h20dk/nrf54h20/cpurad works as a SPIM controller device
+
+
+Requirements
+************
+
+This sample can be run on multicore SoCs like nRF54H20 and requires additional wiring as below.
+
+Wiring
+******
+
+Wires (jumpers) for connecting SPIS and SPIM devices are needed:
+
+- SPIS WAKE <-> WAKE SPIM
+- SPIS CS <-----> CS SPIM
+- SPIS SCK <---> SCK SPIM
+- SPIS MOSI <-> MOSI SPIM
+- SPIS MISO <-> MISO SPIM
+
+Building and Running
+********************
+
+The code can be found in :zephyr_file:`samples/boards/nordic/spis_wakeup`.
+
+To build and flash the application:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/boards/nordic/spis_wakeup
+   :board: nrf54h20dk/nrf54h20/cpuapp
+   :goals: build flash
+   :compact:
+
+Sample Output
+=============
+
+nrf54h20/cpuapp:
+
+.. code-block:: console
+
+    [00:00:00.272,217] <inf> spi_wakeup: Hello world from [email protected]/nrf54h20/cpuapp
+    [00:00:00.272,241] <inf> spi_wakeup: SPIS: waiting for SPI transfer; going to sleep...
+    [00:00:02.274,192] <inf> spi_wakeup: SPIS: woken up by nrf54h20/cpurad
+    [00:00:02.274,215] <inf> spi_wakeup: SPIS: will be active for 500ms after transfer
+
+nrf54h20/cpurad:
+
+.. code-block:: console
+
+    [00:00:00.272,195] <inf> spi_wakeup: Hello world from [email protected]/nrf54h20/cpurad
+    [00:00:00.272,219] <inf> spi_wakeup: SPIM: going to sleep for 1.5s...
+    [00:00:01.772,352] <inf> spi_wakeup: SPIM: will be active for 500ms before transfer
+    [00:00:02.273,456] <inf> spi_wakeup: SPIM: transferring the CONFIG_BOARD_QUALIFIERS: 'nrf54h20/cpurad'
+
+References
+**********
+
+:zephyr_file:`dts/bindings/spi/nordic,nrf-spi-common.yaml`

samples/boards/nordic/spis_wakeup/boards/nrf54h20dk_nrf54h20_cpuapp.overlay

@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2025 Nordic Semiconductor ASA
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/ {
+	aliases {
+		led = &led0;
+		spis = &spi130;
+		/delete-property/ led1;
+		/delete-property/ sw0;
+		/delete-property/ sw1;
+		/delete-property/ sw2;
+		/delete-property/ sw3;
+	};
+	/delete-node/ buttons;
+};
+
+/delete-node/ &led1;
+
+&exmif {
+	status = "disabled";
+};
+
+&gpiote130 {
+	status = "okay";
+	owned-channels = <0>;
+};
+
+&pinctrl {
+	spi130_default_alt: spi130_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 0, 0)>,
+				<NRF_PSEL(SPIS_MOSI, 0, 6)>,
+				<NRF_PSEL(SPIS_MISO, 0, 8)>,
+				<NRF_PSEL(SPIS_CSN, 0, 10)>;
+		};
+	};
+
+	spi130_sleep_alt: spi130_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIS_SCK, 0, 0)>,
+				<NRF_PSEL(SPIS_MOSI, 0, 6)>,
+				<NRF_PSEL(SPIS_MISO, 0, 8)>,
+				<NRF_PSEL(SPIS_CSN, 0, 10)>;
+			low-power-enable;
+		};
+	};
+};
+
+&spi130 {
+	compatible = "nordic,nrf-spis";
+	status = "okay";
+	def-char = <0x00>;
+	pinctrl-0 = <&spi130_default_alt>;
+	pinctrl-1 = <&spi130_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	wake-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	memory-regions = <&cpuapp_dma_region>;
+	/delete-property/rx-delay-supported;
+	/delete-property/rx-delay;
+};
+
+&uart136 {
+	zephyr,pm-device-runtime-auto;
+};

samples/boards/nordic/spis_wakeup/prj.conf

@@ -0,0 +1,13 @@
+CONFIG_SPI=y
+CONFIG_SPI_SLAVE=y
+CONFIG_GPIO=y
+
+CONFIG_PM=y
+CONFIG_PM_S2RAM=y
+CONFIG_PM_S2RAM_CUSTOM_MARKING=y
+CONFIG_PM_DEVICE=y
+CONFIG_PM_DEVICE_RUNTIME=y
+
+CONFIG_ASSERT=y
+
+CONFIG_LOG=y

samples/boards/nordic/spis_wakeup/sample.yaml

@@ -0,0 +1,22 @@
+common:
+  sysbuild: true
+  depends_on: spi
+
+sample:
+  name: SPI wakeup sample
+tests:
+  sample.drivers.spis.wakeup:
+    tags:
+      - spi
+    platform_allow:
+      - nrf54h20dk/nrf54h20/cpuapp
+    integration_platforms:
+      - nrf54h20dk/nrf54h20/cpuapp
+    harness: console
+    harness_config:
+      fixture: spi_loopback
+      type: multi_line
+      ordered: true
+      regex:
+        - ".*SPIS: waiting for SPI transfer"
+        - ".*SPIS: woken up by"

samples/boards/nordic/spis_wakeup/src/main.c

@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2025 Nordic Semiconductor ASA
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/drivers/spi.h>
+#include <zephyr/drivers/gpio.h>
+
+#define BUF_SIZE 32
+static const struct device *spis_dev = DEVICE_DT_GET(DT_ALIAS(spis));
+static const struct spi_config spis_config = {.operation = SPI_OP_MODE_SLAVE | SPI_WORD_SET(8)};
+
+static const struct gpio_dt_spec led = GPIO_DT_SPEC_GET(DT_ALIAS(led), gpios);
+
+LOG_MODULE_REGISTER(spi_wakeup);
+
+int main(void)
+{
+	bool status;
+	static char rx_buffer[BUF_SIZE];
+	struct spi_buf rx_spi_bufs = {.buf = rx_buffer, .len = sizeof(rx_buffer)};
+	struct spi_buf_set rx_spi_buf_set = {.buffers = &rx_spi_bufs, .count = 1};
+
+	LOG_INF("Hello world from %s", CONFIG_BOARD_TARGET);
+
+	status = gpio_is_ready_dt(&led);
+	__ASSERT(status, "Error: GPIO Device not ready");
+
+	status = gpio_pin_configure_dt(&led, GPIO_OUTPUT_ACTIVE);
+	__ASSERT(status == 0, "Could not configure led GPIO");
+
+	status = device_is_ready(spis_dev);
+	__ASSERT(status, "Error: SPI device is not ready");
+
+	while (1) {
+		memset(rx_buffer, 0x00, sizeof(rx_buffer));
+		LOG_INF("SPIS: waiting for SPI transfer; going to sleep...");
+		gpio_pin_set_dt(&led, 0);
+		spi_read(spis_dev, &spis_config, &rx_spi_buf_set);
+		gpio_pin_set_dt(&led, 1);
+		LOG_INF("SPIS: woken up by %s", rx_buffer);
+		LOG_INF("SPIS: will be active for 500ms after transfer");
+		k_busy_wait(500000);
+	}
+
+	return 0;
+}

samples/boards/nordic/spis_wakeup/sysbuild.cmake

@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+# SPDX-License-Identifier: Apache-2.0
+#
+
+if(SB_CONFIG_SOC_NRF54H20)
+  # Add remote project
+  ExternalZephyrProject_Add(
+    APPLICATION wakeup_trigger
+    SOURCE_DIR ${APP_DIR}/wakeup_trigger
+    BOARD ${SB_CONFIG_BOARD}/${SB_CONFIG_SOC}/cpurad
+    BOARD_REVISION ${BOARD_REVISION}
+  )
+endif()

samples/boards/nordic/spis_wakeup/wakeup_trigger/CMakeLists.txt

@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2025 Nordic Semiconductor ASA
+# SPDX-License-Identifier: Apache-2.0
+#
+
+cmake_minimum_required(VERSION 3.20.0)
+
+find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
+
+project(wakeup_trigger)
+
+target_sources(app PRIVATE src/main.c)

samples/boards/nordic/spis_wakeup/wakeup_trigger/boards/nrf54h20dk_nrf54h20_cpurad.overlay

@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2025 Nordic Semiconductor
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/ {
+	aliases {
+		led = &led1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1: led_1 {
+			gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+			label = "Green LED 1";
+		};
+	};
+};
+
+&gpiote130 {
+	status = "okay";
+	owned-channels = <1>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio9 {
+	status = "okay";
+};
+
+&pinctrl {
+	spi131_default_alt: spi131_default_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 0, 1)>,
+				<NRF_PSEL(SPIM_MOSI, 0, 7)>,
+				<NRF_PSEL(SPIM_MISO, 0, 9)>;
+		};
+	};
+
+	spi131_sleep_alt: spi131_sleep_alt {
+		group1 {
+			psels = <NRF_PSEL(SPIM_SCK, 0, 1)>,
+				<NRF_PSEL(SPIM_MOSI, 0, 7)>,
+				<NRF_PSEL(SPIM_MISO, 0, 9)>;
+			low-power-enable;
+		};
+	};
+};
+
+&spi131 {
+	compatible = "nordic,nrf-spim";
+	status = "okay";
+	pinctrl-0 = <&spi131_default_alt>;
+	pinctrl-1 = <&spi131_sleep_alt>;
+	pinctrl-names = "default", "sleep";
+	overrun-character = <0x00>;
+	cs-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+	zephyr,pm-device-runtime-auto;
+	memory-regions = <&cpurad_dma_region>;
+	spim_dt: spi-device@0 {
+		compatible = "vnd,spi-device";
+		reg = <0>;
+		spi-max-frequency = <DT_FREQ_M(8)>;
+	};
+};
+
+&uart135 {
+	zephyr,pm-device-runtime-auto;
+};

samples/boards/nordic/spis_wakeup/wakeup_trigger/prj.conf

@@ -0,0 +1,13 @@
+CONFIG_SPI=y
+CONFIG_SPI_NRFX_WAKE_TIMEOUT_US=500
+CONFIG_GPIO=y
+
+CONFIG_PM=y
+CONFIG_PM_S2RAM=y
+CONFIG_PM_S2RAM_CUSTOM_MARKING=y
+CONFIG_PM_DEVICE=y
+CONFIG_PM_DEVICE_RUNTIME=y
+
+CONFIG_ASSERT=y
+
+CONFIG_LOG=y