[nrf fromlist] arch:riscv: Support for Direct ISRs for RISCV targets #2888
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…n nrf54h20 Extend support in dt bindings and in the driver to allow use of AIN8 to AIN13 analog inputs. Signed-off-by: Krzysztof Chruściński <[email protected]> (cherry picked from commit f2e1ac0)
…onfiguration Add AIN9 pin in nrf54h20dk to verify AIN8-AIN13 inputs. Signed-off-by: Krzysztof Chruściński <[email protected]> (cherry picked from commit a5d023a)
…ection Selection of the LF clock source for the GRTC should be performed as early as possible, before starting GRTC. Upstream PR #: 87199 Signed-off-by: Adam Kondraciuk <[email protected]>
…GRTC Disable automatic LFCLK selection for GRTC during driver initialization. For Zephyr applications it is selected by `sys_clock_driver_init()` depending on configuration and DTS. Upstream PR #: 87199 Signed-off-by: Adam Kondraciuk <[email protected]>
Added configuration for new audio PLL service. Pull in new service implementation in new hal nordic. Signed-off-by: Łukasz Stępnicki <[email protected]> (cherry picked from commit 2bac5ee)
This fixes an issue where a subsequent Config Model Subscription Add message with the same virtual address UUID would result in a Config Model Subscription Status message with the Address field incorrectly set to 0. Signed-off-by: Pavel Vasilyev <[email protected]> (cherry picked from commit d3997c6)
…fset The offset value in the PSA ITS non-volatile space is dedicated to OpenThread key reference IDs. This offset must not overwrite any other ranges already in use within the PSA ITS non-volatile space. Signed-off-by: Arkadiusz Balys <[email protected]> (cherry picked from commit ba9f627)
This reverts commit f1f6bc0. Signed-off-by: Théo Battrel <[email protected]>
The BLE acronym is not an official description of Bluetooth LE, and the Bluetooth SIG only ever refers to it as Bluetooth Low Energy or Bluetooth LE, so Zephyr should as well. This commit does not change any board or vendor specific documentation, and the term BLE may still be used in those. It will be up to the vendors to update it if they want, since many of them are using the term BLE in their products. Signed-off-by: Emil Gydesen <[email protected]> (cherry picked from commit 571f26c)
Update Kconfig options for qualification: - Remove experimental on qualified feature. - Add experimental on unqualified feature. - BT_L2CAP_ECRED is not marked as experimental upstream and we qualify it downstream. Signed-off-by: Joakim Andersson <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Robert Lubos <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> Signed-off-by: Ingar Kulbrandstad <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Herman Berget <[email protected]> Signed-off-by: Tomasz Moń <[email protected]> Signed-off-by: Théo Battrel <[email protected]> (cherry picked from commit e92e87d)
…PSA key IDs We need to make sure that within Zephyr different users of the PSA APIs don't interfere with each other because of using the same numerical IDs for persistent assets. This takes care of the PSA key IDs when using persistent keys through the PSA Crypto API. See the comments in `<zephyr/psa/key_ids.h>` for more information. This removes the recently-introduced Kconfig options that allowed changing the base IDs subsystems were using for their persistent keys. Signed-off-by: Tomi Fontanilles <[email protected]> (cherry picked from commit 0c368e8)
…tions Commit removes weak attribute and renames some functions in crypto_psa.c since there is no centralized distribution of the PSA key ID in bsim tests and no necessity to reimplement native mesh approach. Signed-off-by: Aleksandr Khromykh <[email protected]> (cherry picked from commit acc752f)
Commit removes api prefix for static functions in crypto psa. Signed-off-by: Aleksandr Khromykh <[email protected]> (cherry picked from commit e075e08)
Commit removes centralized PSA key ID distribution in mesh bsim tests since secure storage is instantiated on every simulated device. Signed-off-by: Aleksandr Khromykh <[email protected]> (cherry picked from commit 6a9802e)
… runner is used The logic to detect the default JLink location was placed at the top of the script, executing whenever the script was imported. The west extension command framework loads all runners when initializing, and so this logic was being executed even when using another runner. Move the logic to a function that is only executed when the JLink runner is selected, to avoid executing it at all times. Signed-off-by: Carles Cufi <[email protected]> (cherry picked from commit 4c12a8c)
…cutable Instead of hardcoding a set of paths and trying to find the JLink executable in them, use the corresponding Windows registry to locate it: `HKEY_CURRENT_USER\\Software\\SEGGER\\J-Link` Signed-off-by: Carles Cufi <[email protected]> (cherry picked from commit bb1794b)
During raw scan, Need to disable NRF_WIFI_MGMT_BUFF_OFFLOAD. UMAC will send beacon and probe responses directly to the host, regardless of the mgmt_buff_offload flag's value. Host needs to resubmit buffers to LMAC. Signed-off-by: Kapil Bhatt <[email protected]> (cherry picked from commit 1179014)
…uffers For different values of reorder buffer throughputs are consistent, Setting reorder buffer size to half of the RX buffers configured. Signed-off-by: Kapil Bhatt <[email protected]> (cherry picked from commit 9f7307f)
Sidewalk becomes NCS Add-on. There is no need to trigger Sidewalk tests. Signed-off-by: Tomasz Tyzenhauz <[email protected]>
Added common overlay for nRF54L20 cores. Upstream PR #: 87388 Signed-off-by: Michał Stasiak <[email protected]>
…54l15_cpuflpr Add overlay for nrf54l15dk_nrf54l15_cpuflpr target. Signed-off-by: Krzysztof Chruściński <[email protected]> (cherry picked from commit bec4a84)
Add printing reset reason at the beginning of the sample. Makes it easier to determine if sample correctly wakes up from LP mode. Signed-off-by: Bartlomiej Buczek <[email protected]> (cherry picked from commit c08edf7)
This reverts commit 7d44195. Signed-off-by: Michał Stasiak <[email protected]>
Add TDM support for nRF54H20 and nRF54L20 Upstream PR #: 82144 Signed-off-by: Adam Kondraciuk <[email protected]>
Added missing comparator node to nRF54L20 devicetree. Upstream PR #: 87352 Signed-off-by: Michał Stasiak <[email protected]>
P1.7 used for led 0 was not passing gpio_api_1pin test (probably shortened with another pin in the test setup. Use different pin that passes the gpio_api_1pin test. At current stage this PDK is 'virtual' so this pin is not attached to any LED and it can be changed. Signed-off-by: Krzysztof Chruściński <[email protected]> (cherry picked from commit b298faa)
This reverts commit 8a64a2e. We shouldn't have noups to fix things that can and should be fixed elsewhere/differently. Signed-off-by: Tomi Fontanilles <[email protected]>
This reverts commit fcb4238. We shouldn't have noups to fix things that can and should be fixed elsewhere/differently. Signed-off-by: Tomi Fontanilles <[email protected]>
…ofile TF-M small profile does not support secure storage (know as Protected storage), this commit add filter for tfm test case to pass it incase of small profile been set, see tf-m profiles in below link https://tf-m-user-guide.trustedfirmware.org/configuration/profiles/index.html Signed-off-by: Sadik Ozer <[email protected]> (cherry picked from commit 6932885) Signed-off-by: Tomi Fontanilles <[email protected]>
…nabled scenarios Explicitly set the TF-M profile to not rely on the build system defaults which might differ. Signed-off-by: Tomi Fontanilles <[email protected]> (cherry picked from commit 62fe34d) Signed-off-by: Tomi Fontanilles <[email protected]>
With introduction of OSAL wrapper for memory allocation, usage of zephyr's native malloc calls need to be removed. When NRF70 driver is not enabled, OSAL needs to be built explicitly. Signed-off-by: Ravi Dondaputi <[email protected]> (cherry picked from commit 208e686)
Some file names are changed, fix file names in doxygen comments. Signed-off-by: Kapil Bhatt <[email protected]> (cherry picked from commit 46829bb)
With recent code restructuring file name and path has been changed in nrf_wifi lib. Signed-off-by: Kapil Bhatt <[email protected]> (cherry picked from commit 9285344)
… info Pull in change to include reg chan info along with reg domain in the GET_REG_DOMAIN event for the radio test and offloaded raw TX modes. Signed-off-by: Sachin D Kulkarni <[email protected]> (cherry picked from commit a34198b)
Pull in fix for CI failure in Offloaded raw TX mode caused due to commit 0cd3bb2291a7dd22f4cdb1a4cd935a213c2bbfab in nrf_wifi Signed-off-by: Sachin D Kulkarni <[email protected]> (cherry picked from commit 69ce6af)
Add prompt to Kconfig NRF70_SYSTEM_WITH_RAW_MODES. It is assigned in a configuration file, but is not directly user-configurable (has no prompt). It gets its value indirectly from other symbols. Signed-off-by: Kapil Bhatt <[email protected]> (cherry picked from commit 3ef187d)
…ents Fix doxygen comments of arguments. Signed-off-by: Kapil Bhatt <[email protected]> (cherry picked from commit 5f3bd5d)
nRF70 driver now uses a separate heap, so, no need to explicitly configure the kernel heap. Signed-off-by: Chaitanya Tata <[email protected]> (cherry picked from commit 0b8601c)
nRF70 now by default uses variale buffers. Signed-off-by: Chaitanya Tata <[email protected]> (cherry picked from commit 8fe1df6)
Fine-tune the heap to get peak UDP (TX and RX) results but with minimal heap consumption. Signed-off-by: Chaitanya Tata <[email protected]> (cherry picked from commit be4c79b)
This uses the network packet as is without the need for a copy all the way till the packet is handed over to RPU. Signed-off-by: Chaitanya Tata <[email protected]> (cherry picked from commit 5119f9c)
Now that nRF70 by default uses zero-copy fine-tune the configuration to get optimal memory while getting peak throughputs. Signed-off-by: Chaitanya Tata <[email protected]> (cherry picked from commit e33d9ee)
… address packets The RFC1122 section 3.3.6 says we SHOULD drop the packets if L2 address is brodcast but L3 address is unicast, but we had seen some Wi-Fi access points in the field not conforming to that, and DHCP offer is dropped due to this and causes Wi-Fi connectivity issues. As the RFC saus it's SHOULD and not a MUST, add a config option to allow such packets, disabled by default. Signed-off-by: Chaitanya Tata <[email protected]> (cherry picked from commit 4cd6654)
Add new Ethernet driver config option, ETHERNET_CONFIG_TYPE_EXTRA_TX_PKT_HEADROOM, which allows Ethernet drivers to inform L2 about the extra net_pkt headroom they need to be allocated. This is only supported when CONFIG_NET_L2_ETHERNET_RESERVE_HEADER is enabled, so that it's possible to fit entire packet into a single net_buf, which is needed for zero-copy transmission. Signed-off-by: Robert Lubos <[email protected]> (cherry picked from commit 78c3996)
It seems that this change was solely added to address issues with old TCP stack, which blindly queued packets intended for TX for potential further retransmission, expecting that the packet would remain intact during transmission. I think this assumption was wrong, as it's natural that lower layers append respective headers to the packet, and this "header stripping" behavior was specific for Ethernet L2 only. If an upper layer expects that the packet would need to be retransmitted at some point, it should clone it instead. Therefore, remove the L2 header stripping from the Ethernet L2 to avoid any potential issues in zero-copy case. Signed-off-by: Robert Lubos <[email protected]> (cherry picked from commit 21b7122)
Fix linking errors by using the Zephyr flags for libary too. Upstream PR #: 87835 Signed-off-by: Kapil Bhatt <[email protected]>
…it failures Reconfigure DATA heap sizes to fix the driver init failures. Upstream PR #: 87979 Signed-off-by: Ravi Dondaputi <[email protected]>
Add a debug shell to the driver to provide advanced debug support such as reading/writing to RPU memory and registers etc. Upstream PR #: 87823 Signed-off-by: Sachin D Kulkarni <[email protected]>
Move the wifi_util to the newly created nrf70 shell as a sub-shell. Upstream PR #: 87823 Signed-off-by: Sachin D Kulkarni <[email protected]>
Added binding and node for audio clock on nRF54L20 with fixed frequency of 24 MHz. Upstream PR #: 87105 Signed-off-by: Michał Stasiak <[email protected]>
…s on nRF54 Added support for audio clock for nRF54L20 and AudioPLL for nRF54H20 in DMIC PDM driver. Upstream PR #: 87105 Signed-off-by: Michał Stasiak <[email protected]>
Add option to use direct ISR. Signed-off-by: Krzysztof Chruściński <[email protected]>
Added support for Direct ISRs in the multithreaded enviroment Signed-off-by: Rafal Dyla <[email protected]>
This was referenced May 19, 2025
For test only. Remove it later Signed-off-by: Rafal Dyla <[email protected]>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Added support for Direct ISRs in the multithreaded enviroment