sync dumpling asserts

* taken from https://github.com/LineageOS/android_device_oneplus_dumpling/blob/9842f9ab9ad623f572fa936610e3c5772ecedda4/BoardConfig.mk#L14

Signed-off-by: SirRGB <[email protected]>

Author: SirRGB

openandroidinstaller/assets/configs/coral.yaml

@@ -39,7 +39,7 @@ steps:
       content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
   boot_recovery:
-    - type: confirm_button 
+    - type: confirm_button
       content: >
         Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
         adapting and repairing of the operating system.
@@ -53,11 +53,11 @@ steps:
     - type: call_button
       content: >
         When you are in the bootloder, install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
+
         Note : If you have not selected additional partitions it will do nothing and is save to continue.
       command: fastboot_flash_additional_partitions
     - type: call_button
       img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/crownlte.yaml

@@ -1,19 +1,19 @@
 metadata:
   maintainer: Tobias Sterbak (tsterbak)
-  device_name: Samsung Galaxy Note 9 
+  device_name: Samsung Galaxy Note 9
   is_ab_device: false
-  device_code: crownlte 
+  device_code: crownlte
   supported_device_codes:
-    - crownlte 
+    - crownlte
 requirements:
   android: 10
 steps:
   unlock_bootloader:
   boot_recovery:
     - type: call_button
       content: >
-        As a first step, you need to boot into the bootloader. A bootloader is the piece of software, 
-        that tells your phone how to start and run an operating system (like Android). Your device should be turned on. 
+        As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
+        that tells your phone how to start and run an operating system (like Android). Your device should be turned on.
         Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -24,6 +24,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Bixby* + *Power button*.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Bixby* + *Power button*.

openandroidinstaller/assets/configs/d1.yaml

@@ -2,9 +2,9 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Samsung Galaxy Note 10
   is_ab_device: false
-  device_code: d1 
+  device_code: d1
   supported_device_codes:
-    - d1 
+    - d1
 requirements:
   android: 12
 steps:
@@ -27,7 +27,7 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on. 
+        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on.
         Then press 'Confirm and run' to reboot into download mode. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -37,6 +37,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Bixby* + *Power button*.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Bixby* + *Power button*.

openandroidinstaller/assets/configs/d2s.yaml

@@ -2,7 +2,7 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Samsung Galaxy Note 10+
   is_ab_device: false
-  device_code: d2s 
+  device_code: d2s
   supported_device_codes:
     - d2s
 requirements:
@@ -27,7 +27,7 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on. 
+        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on.
         Then press 'Confirm and run' to reboot into download mode. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -38,6 +38,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Bixby* + *Power button*.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Bixby* + *Power button*.

openandroidinstaller/assets/configs/dreamlte.yaml

@@ -13,8 +13,8 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        As a first step, you need to boot into the bootloader. A bootloader is the piece of software, 
-        that tells your phone how to start and run an operating system (like Android). Your device should be turned on. 
+        As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
+        that tells your phone how to start and run an operating system (like Android). Your device should be turned on.
         Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -25,5 +25,5 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds 
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds
         until the screen turns black to reboot  & release the buttons immediately when it does, then immediately hold *Volume Up* + *Bixby* + *Power button* until you are in recovery mode.

openandroidinstaller/assets/configs/dumpling.yaml

@@ -6,6 +6,7 @@ metadata:
   supported_device_codes:
     - dumpling
     - OnePlus5T
+    - oneplus5t
   twrp-link: cheeseburger_dumpling
 requirements:
   android: 10