Skip to content
Change the repository type filter

All

    Repositories list

    • The PCT2075 is a temperature-to-digital converter featuring ±1 °C accuracy over -25 °C to +100 °C range. It uses an on-chip band gap temperature sensor and Sigma-Delta A to D conversion technique with an overtemperature detection output
      C
      0000Updated Sep 12, 2025Sep 12, 2025
    • .github

      Public
      0000Updated Sep 10, 2025Sep 10, 2025
    • gs-scan

      Public
      This is a middleware software used to simplify CAN communication, it is easy to configure and provides simple sending and receiving functions and the format for transmitting data was specified. It has some defined commands such as reset, data transmission, OTA, Bluetooth settings, the users can extend these commands according to your needs.
      C
      0000Updated Sep 10, 2025Sep 10, 2025
    • This is a demo example of Wi-Fi connection using BLE on RT1170 EVKB using Wi-Fi module Murata 2EL.
      0000Updated Sep 9, 2025Sep 9, 2025
    • This application note introduces the power domains, power modes, highlight configurations, wake up, and low power and wakeup optimization of MCXA345/346. It provides different low power and wake up configurations through demo for user reference.
      C
      0000Updated Sep 9, 2025Sep 9, 2025
    • This demo shows how to use a FXLS8974CF accelerometer connected to the FRDM-RW612's MikroE port. Also, accelerometer measurements are sent over Bluetooth low energy so they can be seen with the IoT toolbox mobile application.
      C
      0000Updated Sep 8, 2025Sep 8, 2025
    • This demo project provides low-power sensors examples ported on FRDM-MCXW23. Additionally, the project contains several demo applications to showcase how to configure an accelerometer, magnetic switch sensor and pressure/altimeter sensor in various modes.
      C
      0100Updated Sep 4, 2025Sep 4, 2025
    • This demo shows how to use the HeartRate4Click Board with the FRDM-RW612 Board over BLE. The data from the sensor is sent over BLE so it can be seen with the IoT Toolbox mobile application.
      C
      0000Updated Sep 4, 2025Sep 4, 2025
    • This demo uses MikroE Oled C Click display with FRDM MCX boards using SPI CMSIS driver and GPIO component
      C
      0000Updated Sep 2, 2025Sep 2, 2025
    • This repository contains two MCUXpressoIDE projects for MCXN947 core0 and core1.Core0 initialize LPI2C3 as I2C Master, and do I2C read/write triggered by configured CTIMER. Core1 initialize LPI2C7 as I2C Slave and read/write SRAM by what it received.
      0000Updated Sep 2, 2025Sep 2, 2025
    • This application demonstrates BLE Throughput measurement on RT1170 using wireless module IW612.
      C
      0000Updated Aug 28, 2025Aug 28, 2025
    • AI Electric screwdriver auto-stop SD card recorder software for collecting dataset
      0000Updated Aug 21, 2025Aug 21, 2025
    • This is scripts package is used for KW45 secure boot, including generating keys, programming fuse, signing image, generating sb3 file, debugging authentication, advancing lifecycle.
      Batchfile
      0000Updated Aug 20, 2025Aug 20, 2025
    • This application demonstrates how to implement EtherCAT+ PMSM motor control on the iMX.RT1180.
      C
      0000Updated Aug 5, 2025Aug 5, 2025
    • This is demo code for PMSM sensorless one shunt FOC on MCX A
      C
      0000Updated Aug 1, 2025Aug 1, 2025
    • This is demo code for PMSM sensorless control on FRDM-MCXE247.
      C
      0000Updated Aug 1, 2025Aug 1, 2025
    • The RW612 FRDM example provides a baseline demonstration of a Matter dual-endpoint plus Thread OTBR application
      0000Updated Jul 31, 2025Jul 31, 2025
    • MCX W71 Light Switch Combo example provides a base line demonstration of a Matter dual-endpoint application
      0000Updated Jul 31, 2025Jul 31, 2025
    • This is the complementary project for [AN14434](https://www.nxp.com.cn/docs/en/application-note/AN14434.pdf), which demonstrates how implement usb to i3c demo on MCXN236.In the MCXN236 USB to I3C demo, the USB device uses USB CDC virtual com class to communicate with PC host. You can use terminal tool to send a serial data to control I3C interface.
      C
      1000Updated Jul 24, 2025Jul 24, 2025
    • This demo shows how to use and send the data from the built-in temperature sensor in the FRDM-RW612 board as well as the Accel 4 click and the HeartRate 4 click mikro-e boards over wifi to an http server that displays their information.
      C
      0000Updated Jul 23, 2025Jul 23, 2025
    • Software package for application note AN14729, it shows basic usage of MCX E24x EdgeLock Accelerator(CSEC).
      C
      0000Updated Jul 22, 2025Jul 22, 2025
    • This is the source code repository for AN14754 - Using MCXE247 QuadSPI Module.
      C
      0000Updated Jul 22, 2025Jul 22, 2025
    • The FlexTimer (FTM) module is an enhanced timer module that supports input capture, output compare, and the generation of PWM signals to control electric motor and power management applications. AN14617 is primarily focused on the features of the FTM module in MCXE24x product series
      C
      0000Updated Jul 22, 2025Jul 22, 2025
    • Time Series Studio powered, on-device learning Fan anomaly detection based on FRDM-MCXA156
      C
      0000Updated Jul 21, 2025Jul 21, 2025
    • On-device trainable anomaly detection base on MCX platform
      C
      31200Updated Jul 21, 2025Jul 21, 2025
    • C
      1100Updated Jul 21, 2025Jul 21, 2025
    • This demo demonstrates the AI capabilities of the mcxn947. It displays the image captured by the camera on the LCD screen and performs face detection.
      C
      31211Updated Jul 21, 2025Jul 21, 2025
    • Label the CIFAR10 images from the camera on FRDM-MCXN947
      C
      1000Updated Jul 21, 2025Jul 21, 2025
    • Toy doll recognition base on machine learning algorithm, power by MCXN-947.
      C
      0000Updated Jul 21, 2025Jul 21, 2025
    • This application note describes how to running RT-Thread with MCXUPressoIDE on FRDM-MCXC444.
      C
      0000Updated Jul 17, 2025Jul 17, 2025