Releases: p-chan5/EasyPulse
EasyPulse 1.3.1
Made with easyeffects =>8.1.2 They are expected to be compatible with future versions. In any case, see: Easy Effects Changelog or read HOW TO BUILD THEM.
WHAT'S NEW 🗞️
- Changes in the indie preset:
- Fixed Equalizer and Multiband Compressor numbers (#)
- Fixed Multiband Compressor On/Off
- Set Compressor Release Time to
0.00 ms
- Level Meter effect has been removed. This is because Autogain displays the same Loudness info. And it is only used for signal analysis (it does not affect the sound).
- Revert Limiter Mode to Herm thin in maximum latency presets.
- Revert Autogain Reference to Geometric mean (MSI)
- Set new Limiter Smooth control to
0.00 dB
EasyPulse 1.3.0
Made with easyeffects =>7.2.5 They are expected to be compatible with future versions. In any case, see: Easy Effects Changelog.
WHAT'S NEW 🗞
- Changes in the indie preset:
- Improved 1st/2nd Multiband Compressor settings.
- Maximizer was replaced by Limiter and Delay by Stereo Tools because they have more options.
- Limiter Knee set to
12.0 dB - Loudness effect has been removed. We will include it again in the next version as a separate preset.
- Presets are now packaged to operate at maximum (max) and minimum (min) latency.
- We now follow the new COMMUNITY PRESETS GUIDELINES.
EasyPulse 1.2.0
This release requires lsp-plugins-lv2 =>1.2.13 and is compatible with easyeffects =>7.1.3
WHAT'S NEW 🗞
- Added Filter. This effect applies a High-Pass filter that eliminates bass. Switch to Low-Pass to do the opposite.
- Minor fixes and enhancements:
- Limiter Mode revert to Herm Thin. Switch to Herm Wide to improve stereo separation at maximum latency.
- More optimizations to indie preset:
- Maximizer Release set to 100.00 ms
- Frequency range of 1st / 2nd Multiband Compressor changed to 116.54 Hz - 5274.04 Hz
- Surround mode is now split into simple (2nd Equalizer), soft (3rd Equalizer) and harsh (4th Equalizer). Pick your favorite!
HIGHER QUALITY, HIGHER LATENCY 💎️
You can get more quality in exchange for notable latency. Just follow the steps below:
- Select Loudness. Set the following values:
| FFT Size |
|---|
| 16384 |
- Select 1st / 2nd / 3rd / 4th Equalizer. Set the following values:
| X | Mode |
|---|---|
| Equalizer | SPM |
| Filter | (MT) |
- Select Filter. Set the following values:
| Mode | Equalizer Mode |
|---|---|
| LRX (MT) | SPM |
- Select 1st / 2nd Multiband Compressor. Set the following values:
| Operating Mode |
|---|
| Linear Phase |
Band Sidechain Options
| # | Lookahead |
|---|---|
| X | 20.00 ms |
- Select Compressor. Set the following values:
Sidechain
| Lookahead |
|---|
| 20.00 ms |
- Select Limiter. Set the following values:
| Mode | Lookahead | Attack | Release |
|---|---|---|---|
| Herm Wide | 20.00 ms | 20.00 ms | 20.00 ms |
EasyPulse 1.1.0
This release requires lsp-plugins-lv2 =>1.2.10 and is ONLY compatible with easyeffects =>7.1.1
- Added 2nd Multiband Compressor. This effect recreates a Sony 360 Reality Audio surround using dynamic L/R filters.
indiereceived improvements:- Limiter replaced by Maximizer
- Stereo Tools replaced by Delay
- Now you can get more quality in exchange for notable latency. Read HIGHER QUALITY, HIGHER LATENCY.
- Minor improvements to some effects.
- Optimized 2nd / 3rd Equalizer settings using Ladder-Pass filters.
- Stereo Split Mode enabled for Compressor and Multiband Compressor.
1.0.0
This release requires lsp-plugins-lv2 =>1.2.10 and is compatible with easyeffects =>7.1.0
WHAT'S NEW 🗞
- Added indie preset.
- Added Multiband Compressor.
- Improved Compressor, Crossfeed, Limiter and Reverberation settings.
- Now all presets are latency friendly. Therefore, they will require much less processing and give better results.
- Surround mode has been redesigned for better stereo splitting. Left graph (old) / Right graph (new).
0.12.0
0.11.0
This release requires lsp-plugins-lv2 1.2.8 or newer.
This is the latest maintenance release of PulseEffects. Future releases will go hand in hand with the stable branch of EasyEffects. With this, we hope to provide regular updates that will greatly benefit Arch Linux and Flatpak users.
WHAT'S NEW 🗞
- Added Compressor.
- Added Lever Meter.
- Configurable bass level for
edmandhifi - Maximizer replaced by Limiter due to ARL function fix.
- Fixed 2nd / 3rd Equalizer filter width.
- Removed
custom
COMPATIBILITY ⚠️
For EasyEffects =>7.0.7 and PulseEffects =>4.8.7 where => means equal or greater than...
If you have an older version, please read HOW TO BUILD THEM.
0.10.0
WHAT'S NEW 🗞
- Optimized 2nd / 3rd Equalizer 🧬 settings
- Delay replaced by Stereo Tools 👥️
COMPATIBILITY ⚠️
For EasyEffects =>7.0.0 and PulseEffects =>4.8.7 where => means equal or greater than...
If you have an older version, please read HOW TO BUILD THEM.
0.9.0
WHAT'S NEW 🗞
- Added support for Hi-Res Audio.
-
Optimized 1st Equalizer 🎲 settings.
-
Fixed Loudness 📢️ position.
-
podcast 🎙 moved to ARCHIVE (does not support Hi-Res).
HI-RES AUDIO ON LINUX 🐧
The equalizer has to do with this (in addition to the sample rate and bitrate). Since the filtering must be clean enough (free of artifacts) to achieve high definition sound in conventional audio systems.
The graph on the left shows hifi without hi-res and the one on the right with it:
For more information, read:
COMPATIBILITY ⚠️
For EasyEffects =>7.0.0 and PulseEffects =>4.8.7 where => means equal or greater than...
If you have an older version, please read HOW TO BUILD THEM.
0.8.0
So we had some time to release this version ahead of schedule :) Enjoy!
If you have a version older than the one maintained (either EE or PE) read HOW TO BUILD THEM as we DO NOT support old versions, ONLY the current stable branch for both.
- Maintained support for EasyEffects
=>7.0.0and PulseEffects=>4.8.7 - Added Bass Enhancer 💪
- Added 3rd Equalizer 🧬 (EE only).
- 2nd Equalizer 🧬 received improvements and bug fixes (EE only).
- A couple more fixes.