Update Discourse data data [skip ci]

Author: precice-bot

assets/data/faq.json

@@ -1,6 +1,6 @@
 {
   "source": "preCICE Discourse (FAQ)",
-  "generated_at": "2025-11-22T06:22:54.048136",
+  "generated_at": "2025-11-23T06:24:01.725028",
   "topics": [
     {
       "id": 27,
@@ -9,7 +9,7 @@
       "url": "https://precice.discourse.group/t/can-precice-be-used-for-volume-coupling/27",
       "created_at": "2019-09-23T20:55:55.190Z",
       "last_posted_at": "2025-08-11T13:12:45.035Z",
-      "views": 3231,
+      "views": 3232,
       "posts_count": 9,
       "like_count": 2,
       "excerpt": "I read that you do surface coupling?\nDo you support volume coupling too?"
@@ -33,7 +33,7 @@
       "url": "https://precice.discourse.group/t/can-precice-be-used-with-moving-meshes/53",
       "created_at": "2019-10-14T12:30:50.463Z",
       "last_posted_at": "2024-06-06T02:01:13.798Z",
-      "views": 1449,
+      "views": 1450,
       "posts_count": 29,
       "like_count": 7,
       "excerpt": "What happens when the interface is moving?"
@@ -69,7 +69,7 @@
       "url": "https://precice.discourse.group/t/can-precice-be-used-with-gpus-or-other-accelerator-cards/822",
       "created_at": "2021-12-08T11:09:10.769Z",
       "last_posted_at": "2023-05-10T15:52:06.292Z",
-      "views": 884,
+      "views": 885,
       "posts_count": 6,
       "like_count": 4,
       "excerpt": "My target system features GPUs or other accelerator cards.\nCan preCICE use them to accelerate the simulation?"
@@ -141,7 +141,7 @@
       "url": "https://precice.discourse.group/t/3d-1d-coupling/388",
       "created_at": "2020-11-13T07:39:48.596Z",
       "last_posted_at": "2020-11-16T08:51:56.471Z",
-      "views": 1665,
+      "views": 1666,
       "posts_count": 4,
       "like_count": 1,
       "excerpt": "Hi!\nis there a way to couple a 1D simulation (OpenModelica) with a 3D simulation (OpenFoam)?\nthx"
@@ -189,7 +189,7 @@
       "url": "https://precice.discourse.group/t/why-should-i-pick-precice-over-other-coupling-software/31",
       "created_at": "2019-09-23T21:03:23.542Z",
       "last_posted_at": "2019-10-14T20:32:18.079Z",
-      "views": 1144,
+      "views": 1146,
       "posts_count": 4,
       "like_count": 0,
       "excerpt": "There are many other coupling solutions out there.\nMany research groups write their custom coupling framework.\nWhy should I use preCICE?"
@@ -225,10 +225,10 @@
       "url": "https://precice.discourse.group/t/does-partitioned-coupling-introduce-error/55",
       "created_at": "2019-10-14T12:36:10.314Z",
       "last_posted_at": "2019-10-14T12:36:26.189Z",
-      "views": 466,
+      "views": 467,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "I always hear that monolithic coupling is the only way to go, as partitioned coupling introduces error. Is this correct?"
+      "excerpt": ""
     },
     {
       "id": 54,
@@ -240,7 +240,7 @@
       "views": 507,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "Can the individual solvers run on two different platforms on two different machines in/out of a network?"
+      "excerpt": ""
     },
     {
       "id": 52,
@@ -252,7 +252,7 @@
       "views": 511,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "Which code is executing the coupling iterations given that preCICE does not really have a centralized engine to orchestrate the simulation?"
+      "excerpt": ""
     },
     {
       "id": 26,
@@ -264,7 +264,7 @@
       "views": 578,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "How do you test preCICE and its official adapters?\nCan I trust you?"
+      "excerpt": ""
     },
     {
       "id": 50,
@@ -276,7 +276,7 @@
       "views": 833,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "There are multiple OpenFOAM \u201cvariants\u201d, including openfoam.com, openfoam.org, and the early fork foam-extend. Which versions of them are compatible?"
+      "excerpt": ""
     },
     {
       "id": 43,
@@ -288,7 +288,7 @@
       "views": 1003,
       "posts_count": 3,
       "like_count": 0,
-      "excerpt": "Marta asked on the mailing list (March 28, 2019)\n\nI\u2019m using preCICE to couple two codes: the lattice Boltzmann code LUMIS and OpenFOAM. LUMIS has a time step 10 times smaller than OpenFOAM so during the coupling LUMIS subcycles before exchanging data\u2026"
+      "excerpt": ""
     },
     {
       "id": 29,
@@ -300,7 +300,7 @@
       "views": 810,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "My solver offers adaptive mesh refinement.\nCan I use this with preCICE?"
+      "excerpt": ""
     },
     {
       "id": 38,
@@ -312,7 +312,7 @@
       "views": 1115,
       "posts_count": 3,
       "like_count": 1,
-      "excerpt": "A preCICE developer told me to try a \u201cPR\u201d (Pull Request). What is this and how do I try it?"
+      "excerpt": ""
     },
     {
       "id": 44,
@@ -324,7 +324,7 @@
       "views": 1487,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "Alex started a good discussion on the mailing list (May 3, 2019) about best practices when writing a new adapter:\nI wanted to ask if there are some additional guidelines on how to write good adapters for preCICE. I have the feeling that I might think\u2026"
+      "excerpt": ""
     },
     {
       "id": 42,
@@ -336,7 +336,7 @@
       "views": 718,
       "posts_count": 7,
       "like_count": 0,
-      "excerpt": "We had a good discussion with Satish on the mailing list about the re-partitioning process and the connection to parallel data mapping in preCICE.\nSatish asked (July 24, 2019):\n\nIt seems to me that mappings can occur in parallel in preCICE. Is that c\u2026"
+      "excerpt": ""
     },
     {
       "id": 41,
@@ -348,7 +348,7 @@
       "views": 739,
       "posts_count": 2,
       "like_count": 2,
-      "excerpt": "Nikrouz asked on the mailing list (Sep 13, 2019):\n\nI am going to use OpenFoam-CalculiX for FSI simulations.\nAt this time, I am have technical question for preparing preCICE config file. The case I am going to run has very large deformations. Fortunat\u2026"
+      "excerpt": ""
     },
     {
       "id": 36,
@@ -360,7 +360,7 @@
       "views": 638,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": "The OpenFOAM adapter has the form of an OpenFOAM function object. This mechanism is commonly used only for post-processing, so a reasonable question is:\n\nDoes the OpenFOAM adapter also take care of the checkpointing? In other words, can a function ob\u2026"
+      "excerpt": ""
     }
   ]
 }

assets/data/news.json

@@ -1,5 +1,5 @@
 {
-  "generated_at": "2025-11-22T06:22:44.047495",
+  "generated_at": "2025-11-23T06:23:58.796840",
   "topics": [
     {
       "id": 217,
@@ -31,7 +31,7 @@
       "last_posted_at": "2025-11-04T12:39:39.274Z",
       "like_count": 5,
       "posts_count": 1,
-      "views": 71,
+      "views": 72,
       "description": "Imagine a full week of learning as much as possible about coupling simulations and having all the people you need to talk to in the same room. That\u2019s exactly how..."
     },
     {
@@ -108,7 +108,7 @@
       "last_posted_at": "2025-04-07T04:59:59.909Z",
       "like_count": 4,
       "posts_count": 4,
-      "views": 164,
+      "views": 166,
       "description": "Summary: We have been developing a JSON schema for preCICE adapters and tools improving interoperability and enabling tooling support. Find out more about the schema and what you can do..."
     },
     {
@@ -328,7 +328,7 @@
       "last_posted_at": "2021-10-01T11:19:03.881Z",
       "like_count": 8,
       "posts_count": 1,
-      "views": 887,
+      "views": 888,
       "description": "Dear preCICE community, after five years of software development since our 2016 first preCICE reference paper (with already 150 citations on Google scholar ), we are extremely happy to announce..."
     }
   ]