Skip to content

Update getting-started.adoc #4174

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 1 commit into from
Sep 25, 2025
Merged

Update getting-started.adoc #4174

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion documentation/asciidoc/microcontrollers/debug-probe/getting-started.adoc
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -14,7 +14,7 @@ Connect the following:
** Debug Probe `TX` connected to Pico H `RX` pin
** Debug Probe `GND` connected to Pico H `GND` pin

NOTE: If you have a non-H Pico or Pico W (without a JST-SH connector) you can still connect it to a Debug Probe. Solder a male connector to the `SWCLK`, `GND`, and `SWDIO` header pins on the board. Using the alternate 3-pin JST-SH connector to 0.1-inch header (female) cable included with the Debug Probe, connect to the Debug Probe "D" port. Connect `SWCLK`, `GND`, and `SWDIO` on the Pico or Pico W to the `SC`, `GND`, and `SD` pins on the Debug Probe, respectively.
NOTE: If you have a non-H Pico or Pico W (without a JST-SH connector) you can still connect it to a Debug Probe. Solder a male connector to the `SWCLK`, `GND`, and `SWDIO` header pins on the board. Using the alternate 3-pin JST-SH connector to 0.1-inch header (female) cable included with the Debug Probe, connect to the Debug Probe "D" port. Connect `SWCLK`, `GND`, and `SWDIO` on the Pico or Pico W to the `SC` (orange wire), `GND` (black wire), and `SD` (yellow wire) pins on the Debug Probe, respectively.

image:images/wiring.png[width="70%"]