dts: rp1: Disable DMA usage for UART0

Some recent DMA changes have led to data loss in UART0 on Pi 5. It also
seems that even prior to these changes there was a problem with aborted
transfers.

As this is the only RP1 UART configured for DMA, it is better to remove
the DMA usage until it is shown to be reliable.

Link: #6365

Signed-off-by: Phil Elwell <[email protected]>

Author: pelwell

arch/arm64/boot/dts/broadcom/rp1.dtsi

@@ -65,9 +65,9 @@
 			interrupts = <RP1_INT_UART0 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
 			clock-names = "uartclk", "apb_pclk";
-			dmas = <&rp1_dma RP1_DMA_UART0_TX>,
-			       <&rp1_dma RP1_DMA_UART0_RX>;
-			dma-names = "tx", "rx";
+			// dmas = <&rp1_dma RP1_DMA_UART0_TX>,
+			//        <&rp1_dma RP1_DMA_UART0_RX>;
+			// dma-names = "tx", "rx";
 			pinctrl-names = "default";
 			arm,primecell-periphid = <0x00341011>;
 			uart-has-rtscts;