Misc cleanup

cmake/pico_pre_load_toolchain.cmake

@@ -4,7 +4,7 @@ set(PICO_TOOLCHAIN_PATH "${PICO_TOOLCHAIN_PATH}" CACHE INTERNAL "")
 # Set a default build type if none was specified
 set(default_build_type "Release")
 
-list(APPEND CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_PREFIX_PATH)
+list(APPEND CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_PREFIX_PATH PICO_SDK_PATH)
 
 if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
     message(STATUS "Defaulting build type to '${default_build_type}' since not specified.")

pico_sdk_version.cmake

@@ -1,15 +1,17 @@
-# PICO_BUILD_DEFINE: PICO_SDK_VERSION_MAJOR, SDK major version number, type=int, default=Current SDK major version, group=pico_base
-# PICO_CMAKE_CONFIG: PICO_SDK_VERSION_MAJOR, SDK major version number, type=int, default=Current SDK major version, group=pico_base
-set(PICO_SDK_VERSION_MAJOR 2)
-# PICO_BUILD_DEFINE: PICO_SDK_VERSION_MINOR, SDK minor version number, type=int, default=Current SDK minor version, group=pico_base
-# PICO_CMAKE_CONFIG: PICO_SDK_VERSION_MINOR, SDK minor version number, type=int, default=Current SDK minor version, group=pico_base
-set(PICO_SDK_VERSION_MINOR 1)
-# PICO_BUILD_DEFINE: PICO_SDK_VERSION_REVISION, SDK version revision, type=int, default=Current SDK revision, group=pico_base
-# PICO_CMAKE_CONFIG: PICO_SDK_VERSION_REVISION, SDK version revision, type=int, default=Current SDK revision, group=pico_base
-set(PICO_SDK_VERSION_REVISION 2)
-# PICO_BUILD_DEFINE: PICO_SDK_VERSION_PRE_RELEASE_ID, Optional SDK pre-release version identifier, default=Current SDK pre-release identifier, type=string, group=pico_base
-# PICO_CMAKE_CONFIG: PICO_SDK_VERSION_PRE_RELEASE_ID, Optional SDK pre-release version identifier, default=Current SDK pre-release identifier, type=string, group=pico_base
-set(PICO_SDK_VERSION_PRE_RELEASE_ID develop)
+if (NOT DEFINED PICO_SDK_VERSION_MAJOR)
+    # PICO_BUILD_DEFINE: PICO_SDK_VERSION_MAJOR, SDK major version number, type=int, default=Current SDK major version, group=pico_base
+    # PICO_CMAKE_CONFIG: PICO_SDK_VERSION_MAJOR, SDK major version number, type=int, default=Current SDK major version, group=pico_base
+    set(PICO_SDK_VERSION_MAJOR 2)
+    # PICO_BUILD_DEFINE: PICO_SDK_VERSION_MINOR, SDK minor version number, type=int, default=Current SDK minor version, group=pico_base
+    # PICO_CMAKE_CONFIG: PICO_SDK_VERSION_MINOR, SDK minor version number, type=int, default=Current SDK minor version, group=pico_base
+    set(PICO_SDK_VERSION_MINOR 1)
+    # PICO_BUILD_DEFINE: PICO_SDK_VERSION_REVISION, SDK version revision, type=int, default=Current SDK revision, group=pico_base
+    # PICO_CMAKE_CONFIG: PICO_SDK_VERSION_REVISION, SDK version revision, type=int, default=Current SDK revision, group=pico_base
+    set(PICO_SDK_VERSION_REVISION 2)
+    # PICO_BUILD_DEFINE: PICO_SDK_VERSION_PRE_RELEASE_ID, Optional SDK pre-release version identifier, default=Current SDK pre-release identifier, type=string, group=pico_base
+    # PICO_CMAKE_CONFIG: PICO_SDK_VERSION_PRE_RELEASE_ID, Optional SDK pre-release version identifier, default=Current SDK pre-release identifier, type=string, group=pico_base
+    set(PICO_SDK_VERSION_PRE_RELEASE_ID develop)
+endif()
 
 # PICO_BUILD_DEFINE: PICO_SDK_VERSION_STRING, SDK version string, type=string, default=Current SDK version string, group=pico_base
 # PICO_CMAKE_CONFIG: PICO_SDK_VERSION_STRING, SDK version string, type=string, default=Current SDK version string, group=pico_base

src/boards/include/boards/amethyst_fpga.h

@@ -21,6 +21,8 @@ pico_board_cmake_set(PICO_PLATFORM, rp2350)
 // For board detection
 #define RASPBERRYPI_AMETHYST_FPGA
 
+#define RASPBERRYPI_FPGA 1
+
 #define PICO_NO_FPGA_CHECK 0
 
 // --- UART ---

src/cmake/rp2_common.cmake

@@ -63,14 +63,14 @@ pico_add_subdirectory(rp2_common/hardware_watchdog)
 pico_add_subdirectory(rp2_common/hardware_xip_cache)
 pico_add_subdirectory(rp2_common/hardware_xosc)
 
-if (PICO_RP2350 OR PICO_COMBINED_DOCS)
+if (PICO_COMBINED_DOCS OR NOT PICO_RP2040)
     pico_add_subdirectory(rp2_common/hardware_powman)
     # Note in spite of the name this is usable on Arm as well as RISC-V:
     pico_add_subdirectory(rp2_common/hardware_riscv_platform_timer)
     pico_add_subdirectory(rp2_common/hardware_sha256)
 endif()
 
-if (PICO_RP2350 OR PICO_COMBINED_DOCS)
+if (PICO_COMBINED_DOCS OR NOT PICO_RP2040)
     pico_add_subdirectory(rp2_common/hardware_dcp)
     pico_add_subdirectory(rp2_common/hardware_rcp)
 endif()
@@ -108,7 +108,7 @@ if (NOT PICO_BARE_METAL)
     pico_add_subdirectory(rp2_common/pico_printf)
     pico_add_subdirectory(rp2_common/pico_rand)
 
-    if (PICO_RP2350 OR PICO_COMBINED_DOCS)
+    if (PICO_COMBINED_DOCS OR NOT PICO_RP2040)
         pico_add_subdirectory(rp2_common/pico_sha256)
     endif()
 

src/rp2040/hardware_regs/include/hardware/platform_defs.h

@@ -46,6 +46,15 @@
 
 #define HAS_SIO_DIVIDER 1
 #define HAS_RP2040_RTC  1
+
+#ifndef FPGA_CLK_SYS_HZ
+#define FPGA_CLK_SYS_HZ (48 * MHZ)
+#endif
+
+#ifndef FPGA_CLK_REF_HZ
+#define FPGA_CLK_REF_HZ (12 * MHZ)
+#endif
+
 // PICO_CONFIG: XOSC_HZ, Crystal oscillator frequency in Hz, type=int, default=12000000, advanced=true, group=hardware_base
 // NOTE:  The system and USB clocks are generated from the frequency using two PLLs.
 // If you override this define, or SYS_CLK_HZ/USB_CLK_HZ below, you will *also* need to add your own adjusted PLL set-up defines to

src/rp2350/hardware_regs/include/hardware/platform_defs.h

@@ -73,6 +73,16 @@
 #define HAS_POWMAN_TIMER 1
 #define HAS_RP2350_TRNG 1
 #define HAS_HSTX 1
+#define HAS_PADS_BANK0_ISOLATION 1
+#define __RISCV_PMP_CHECKED 1
+
+#ifndef FPGA_CLK_SYS_HZ
+#define FPGA_CLK_SYS_HZ (48 * MHZ)
+#endif
+
+#ifndef FPGA_CLK_REF_HZ
+#define FPGA_CLK_REF_HZ (12 * MHZ)
+#endif
 
 // PICO_CONFIG: XOSC_HZ, Crystal oscillator frequency in Hz, type=int, default=12000000, advanced=true, group=hardware_base
 // NOTE:  The system and USB clocks are generated from the frequency using two PLLs.

src/rp2_common/boot_bootrom_headers/include/boot/bootrom_constants.h

@@ -255,11 +255,11 @@ typedef int (*bootrom_api_callback_generic_t)(uint32_t r0, uint32_t r1, uint32_t
 #define BOOTROM_NS_API_get_b_partition 7
 #define BOOTROM_NS_API_COUNT 8
 
-#define OTP_CMD_ROW_BITS                    0x0000ffffu
+#define OTP_CMD_ROW_BITS                    _u(0x0000ffff)
 #define OTP_CMD_ROW_LSB                     _u(0)
-#define OTP_CMD_WRITE_BITS                  0x00010000u
+#define OTP_CMD_WRITE_BITS                  _u(0x00010000)
 #define OTP_CMD_WRITE_LSB                   _u(16)
-#define OTP_CMD_ECC_BITS                    0x00020000u
+#define OTP_CMD_ECC_BITS                    _u(0x00020000)
 #define OTP_CMD_ECC_LSB                     _u(17)
 
 #ifndef __ASSEMBLER__

src/rp2_common/hardware_clocks/clocks.c

@@ -283,12 +283,12 @@ static const uint8_t gpin0_src[CLK_COUNT] = {
     CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0,    // CLK_REF
     CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0,    // CLK_SYS
     CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0,   // CLK_PERI
-#if !PICO_RP2040
+#if HAS_HSTX
     CLOCKS_CLK_HSTX_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0,   // CLK_HSTX
 #endif
     CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0,    // CLK_USB
     CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0,    // CLK_ADC
-#if PICO_RP2040
+#if HAS_RP2040_RTC
     CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0,    // CLK_RTC
 #endif
 };

src/rp2_common/hardware_gpio/gpio.c

@@ -46,7 +46,7 @@ void gpio_set_function(uint gpio, gpio_function_t fn) {
     // Zero all fields apart from fsel; we want this IO to do what the peripheral tells it.
     // This doesn't affect e.g. pullup/pulldown, as these are in pad controls.
     io_bank0_hw->io[gpio].ctrl = fn << IO_BANK0_GPIO0_CTRL_FUNCSEL_LSB;
-#if !PICO_RP2040
+#if HAS_PADS_BANK0_ISOLATION
     // Remove pad isolation now that the correct peripheral is in control of the pad
     hw_clear_bits(&pads_bank0_hw->io[gpio], PADS_BANK0_GPIO0_ISO_BITS);
 #endif

src/rp2_common/hardware_rtc/include/hardware/rtc.h

@@ -8,7 +8,9 @@
 #define _HARDWARE_RTC_H
 
 #include "pico.h"
+#if HAS_RP2040_RTC
 #include "hardware/structs/rtc.h"
+#endif
 
 /** \file hardware/rtc.h
  *  \defgroup hardware_rtc hardware_rtc

src/rp2_common/pico_bit_ops/CMakeLists.txt

@@ -19,9 +19,10 @@ if (NOT TARGET pico_bit_ops)
             ${CMAKE_CURRENT_LIST_DIR}/bit_ops_aeabi.S
             )
 
-    target_link_libraries(pico_bit_ops_pico INTERFACE pico_bootrom pico_bit_ops_headers)
+    target_link_libraries(pico_bit_ops_pico INTERFACE pico_bit_ops_headers)
 
-    if (NOT PICO_RP2350)
+    if (PICO_RP2040)
+        target_link_libraries(pico_bit_ops_pico INTERFACE pico_bootrom)
         # gcc
         pico_wrap_function(pico_bit_ops_pico __clzsi2)
         pico_wrap_function(pico_bit_ops_pico __clzsi2)

src/rp2_common/pico_bit_ops/bit_ops_aeabi.S

@@ -5,7 +5,9 @@
  */
 
 #include "pico/asm_helper.S"
+#if PICO_RP2040
 #include "pico/bootrom.h"
+#endif
 #include "pico/runtime_init.h"
 
 pico_default_asm_setup

src/rp2_common/pico_bootrom/bootrom.c

@@ -113,7 +113,7 @@ int rom_add_flash_runtime_partition(uint32_t start_offset, uint32_t size, uint32
 }
 
 int rom_pick_ab_update_partition(uint32_t *workarea_base, uint32_t workarea_size, uint partition_a_num) {
-#if PICO_RP2350
+#if !PICO_RP2040
     // Generated from adding the following code into the bootrom
     // scan_workarea_t* scan_workarea = (scan_workarea_t*)workarea;
     // printf("VERSION_DOWNGRADE_ERASE_ADDR %08x\n", &(always->zero_init.version_downgrade_erase_flash_addr));

src/rp2_common/pico_bootrom/include/pico/bootrom.h

@@ -173,7 +173,7 @@ __force_inline static void *rom_hword_as_ptr(uint16_t rom_address) {
 
 #ifdef __riscv
 static __force_inline bool rom_size_is_64k(void) {
-#ifdef RASPBERRYPI_AMETHYST_FPGA
+#if RASPBERRYPI_FPGA
     return *(uint16_t*)0x14 >= 0x8000;
 #else
     return false;

src/rp2_common/pico_btstack/CMakeLists.txt

@@ -6,7 +6,7 @@ endif ()
 
 set(BTSTACK_TEST_PATH "src/bluetooth.h")
 if (NOT PICO_BTSTACK_PATH)
-    set(PICO_BTSTACK_PATH ${PROJECT_SOURCE_DIR}/lib/btstack)
+    set(PICO_BTSTACK_PATH ${PICO_SDK_PATH}/lib/btstack)
     if (PICO_CYW43_SUPPORTED AND NOT EXISTS ${PICO_BTSTACK_PATH}/${BTSTACK_TEST_PATH})
         message(WARNING "btstack submodule has not been initialized; Pico W BLE support will be unavailable.
             hint: try 'git submodule update --init' from your SDK directory (${PICO_SDK_PATH}).")

src/rp2_common/pico_fix/rp2040_usb_device_enumeration/rp2040_usb_device_enumeration.c

@@ -5,6 +5,7 @@
  */
 
 #include "pico.h"
+#if PICO_RP2040_B0_SUPPORTED || PICO_RP2040_B1_SUPPORTED
 #include "pico/time.h"
 #include "hardware/structs/usb.h"
 #include "hardware/gpio.h"
@@ -17,7 +18,6 @@
 #define LS_K   0b10
 #define LS_SE1 0b11
 
-#if PICO_RP2040_B0_SUPPORTED || PICO_RP2040_B1_SUPPORTED
 static void hw_enumeration_fix_wait_se0(void);
 static void hw_enumeration_fix_force_ls_j(void);
 static void hw_enumeration_fix_finish(void);

src/rp2_common/pico_lwip/CMakeLists.txt

@@ -6,7 +6,7 @@ endif ()
 
 set(LWIP_TEST_PATH "src/Filelists.cmake")
 if (NOT PICO_LWIP_PATH)
-    set(PICO_LWIP_PATH ${PROJECT_SOURCE_DIR}/lib/lwip)
+    set(PICO_LWIP_PATH ${PICO_SDK_PATH}/lib/lwip)
     if (PICO_CYW43_SUPPORTED AND NOT EXISTS ${PICO_LWIP_PATH}/${LWIP_TEST_PATH})
         message(WARNING "LWIP submodule has not been initialized; Pico W wireless support will be unavailable
 #hint: try 'git submodule update --init' from your SDK directory (${PICO_SDK_PATH}).")

src/rp2_common/pico_mbedtls/CMakeLists.txt

@@ -6,7 +6,7 @@ endif()
 
 set(MBEDTLS_TEST_PATH "library/aes.c")
 if (NOT PICO_MBEDTLS_PATH)
-    set(PICO_MBEDTLS_PATH ${PROJECT_SOURCE_DIR}/lib/mbedtls)
+    set(PICO_MBEDTLS_PATH ${PICO_SDK_PATH}/lib/mbedtls)
 elseif (NOT EXISTS ${PICO_MBEDTLS_PATH}/${MBEDTLS_TEST_PATH})
     message(WARNING "PICO_MBEDTLS_PATH specified but content not present.")
 endif()

src/rp2_common/pico_multicore/multicore.c

@@ -14,7 +14,7 @@
 #include "hardware/structs/scb.h"
 #endif
 #include "hardware/structs/sio.h"
-#include "hardware/regs/psm.h"
+#include "hardware/structs/psm.h"
 #include "hardware/claim.h"
 
 #if !PICO_RP2040

src/rp2_common/pico_printf/printf_none.S

@@ -5,7 +5,6 @@
  */
 
 #include "pico/asm_helper.S"
-#include "pico/bootrom/sf_table.h"
 
 pico_default_asm_setup
 

src/rp2_common/pico_rand/CMakeLists.txt

@@ -7,8 +7,13 @@ target_sources(pico_rand INTERFACE
 target_include_directories(pico_rand_headers SYSTEM INTERFACE ${CMAKE_CURRENT_LIST_DIR}/include)
 
 pico_mirrored_target_link_libraries(pico_rand INTERFACE
-        pico_unique_id
         hardware_clocks
         hardware_timer
         hardware_sync
 )
+
+if (TARGET pico_unique_id)
+    pico_mirrored_target_link_libraries(pico_rand INTERFACE
+            pico_unique_id
+    )
+endif()

src/rp2_common/pico_rand/rand.c

@@ -25,11 +25,15 @@
 */
 
 #include "pico/rand.h"
+#if PICO_RAND_SEED_ENTROPY_SRC_BOARD_ID
 #include "pico/unique_id.h"
+#endif
 #include "pico/time.h"
 #include "hardware/clocks.h"
 #include "hardware/structs/rosc.h"
+#if PICO_RAND_SEED_ENTROPY_SRC_BUS_PERF_COUNTER || PICO_RAND_ENTROPY_SRC_BUS_PERF_COUNTER
 #include "hardware/structs/busctrl.h"
+#endif
 #include "hardware/sync.h"
 
 static bool rng_initialised = false;

src/rp2_common/pico_runtime_init/CMakeLists.txt

@@ -13,7 +13,13 @@ pico_mirrored_target_link_libraries(pico_runtime_init INTERFACE
 )
 
 if (TARGET hardware_clocks)
-    pico_mirrored_target_link_libraries(pico_runtime_init INTERFACE hardware_clocks hardware_timer hardware_vreg)
+    pico_mirrored_target_link_libraries(pico_runtime_init INTERFACE hardware_clocks)
+endif()
+if (TARGET hardware_timer)
+    pico_mirrored_target_link_libraries(pico_runtime_init INTERFACE hardware_timer)
+endif()
+if (TARGET hardware_vreg)
+    pico_mirrored_target_link_libraries(pico_runtime_init INTERFACE hardware_vreg)
 endif()
 
 # pico/runtime_init.h includes pico/runtime.h

src/rp2_common/pico_runtime_init/runtime_init_clocks.c

@@ -41,10 +41,10 @@ void __weak runtime_init_clocks(void) {
     // Note: These need setting *before* the ticks are started
     if (running_on_fpga()) {
         for (uint i = 0; i < CLK_COUNT; i++) {
-            clock_set_reported_hz(i, 48 * MHZ);
+            clock_set_reported_hz(i, FPGA_CLK_SYS_HZ);
         }
         // clk_ref is 12MHz in both RP2040 and RP2350 FPGA
-        clock_set_reported_hz(clk_ref, 12 * MHZ);
+        clock_set_reported_hz(clk_ref, FPGA_CLK_REF_HZ);
         // RP2040 has an extra clock, the rtc
 #if HAS_RP2040_RTC
         clock_set_reported_hz(clk_rtc, RTC_CLOCK_FREQ_HZ);

src/rp2_common/pico_runtime_init/runtime_init_stack_guard.c

@@ -32,7 +32,7 @@ void runtime_init_per_core_install_stack_guard(void *stack_bottom) {
                    | 0x10000000; // XN = disable instruction fetch; no other bits means no permissions
 
 #elif defined(__riscv)
-    #if !PICO_RP2350
+#if !__RISCV_PMP_CHECKED
 #error "Check PMP configuration for new platform"
 #endif
     // RISC-V PMP, RP2350 configuration of Hazard3: 8 non-hardwired regions,

src/rp2_common/pico_stdio_uart/stdio_uart.c

@@ -128,13 +128,13 @@ void stdio_uart_deinit_full(struct uart_inst *uart, int tx_pin, int rx_pin) {
     uart_instance = uart;
     stdio_set_driver_enabled(&stdio_uart, false);
     uart_deinit(uart_instance);
-#if PICO_RP2040
+#if HAS_PADS_BANK0_ISOLATION
+// Leave pads isolated
+    if (tx_pin >= 0) hw_set_bits(&pads_bank0_hw->io[tx_pin], PADS_BANK0_GPIO0_ISO_BITS);
+if (rx_pin >= 0) hw_set_bits(&pads_bank0_hw->io[rx_pin], PADS_BANK0_GPIO0_ISO_BITS);
+#else
     ((void)tx_pin);
     ((void)rx_pin);
-#else
-    // Leave pads isolated
-    if (tx_pin >= 0) hw_set_bits(&pads_bank0_hw->io[tx_pin], PADS_BANK0_GPIO0_ISO_BITS);
-    if (rx_pin >= 0) hw_set_bits(&pads_bank0_hw->io[rx_pin], PADS_BANK0_GPIO0_ISO_BITS);
 #endif
 }
 

src/rp2_common/tinyusb/CMakeLists.txt

@@ -4,15 +4,19 @@ if (DEFINED ENV{PICO_TINYUSB_PATH} AND (NOT PICO_TINYUSB_PATH))
     message("Using PICO_TINYUSB_PATH from environment ('${PICO_TINYUSB_PATH}')")
 endif ()
 
-set(TINYUSB_TEST_PATH "src/portable/raspberrypi/rp2040")
+set(TINYUSB_TEST_PATH "hw/bsp/rp2040")
 if (NOT PICO_TINYUSB_PATH)
-    set(PICO_TINYUSB_PATH ${PROJECT_SOURCE_DIR}/lib/tinyusb)
+    set(PICO_TINYUSB_PATH ${PICO_SDK_PATH}/lib/tinyusb)
     if (NOT EXISTS ${PICO_TINYUSB_PATH}/${TINYUSB_TEST_PATH})
-        message(WARNING "TinyUSB submodule has not been initialized; USB support will be unavailable
+        if (EXISTS "${PICO_TINYUSB_PATH}/LICENSE")
+            message(WARNING "TinyUSB submodule has been initialized, but does not contain ${TINYUSB_TEST_PATH}; USB support will be unavailable")
+        else()
+            message(WARNING "TinyUSB submodule has not been initialized; USB support will be unavailable
 hint: try 'git submodule update --init' from your SDK directory (${PICO_SDK_PATH}).")
+        endif()
     endif()
 elseif (NOT EXISTS ${PICO_TINYUSB_PATH}/${TINYUSB_TEST_PATH})
-    message(WARNING "PICO_TINYUSB_PATH specified but content not present.")
+    message(WARNING "PICO_TINYUSB_PATH specified, but does not contain ${TINYUSB_TEST_PATH}; USB support will be unavailable")
 endif()
 
 if (EXISTS ${PICO_TINYUSB_PATH}/${TINYUSB_TEST_PATH})
@@ -35,14 +39,18 @@ if (EXISTS ${PICO_TINYUSB_PATH}/${TINYUSB_TEST_PATH})
         PICO_RP2040_USB_DEVICE_UFRAME_FIX=1
     )
 
-    # unmarked version used by stdio USB
-    target_link_libraries(tinyusb_device_unmarked INTERFACE tinyusb_common pico_fix_rp2040_usb_device_enumeration tinyusb_device_base)
+    if (TARGET tinyusb_device_base)
+        # unmarked version used by stdio USB
+        target_link_libraries(tinyusb_device_unmarked INTERFACE tinyusb_common pico_fix_rp2040_usb_device_enumeration tinyusb_device_base)
 
-    pico_add_library(tinyusb_device)
-    target_link_libraries(tinyusb_device INTERFACE tinyusb_device_unmarked)
+        pico_add_library(tinyusb_device)
+        target_link_libraries(tinyusb_device INTERFACE tinyusb_device_unmarked)
+    endif()
 
-    pico_add_library(tinyusb_host)
-    target_link_libraries(tinyusb_host INTERFACE tinyusb_host_base tinyusb_common)
+    if (TARGET tinyusb_host_base)
+        pico_add_library(tinyusb_host)
+        target_link_libraries(tinyusb_host INTERFACE tinyusb_host_base tinyusb_common)
+    endif()
 
     pico_add_library(tinyusb_board)
     target_include_directories(tinyusb_board INTERFACE ${CMAKE_CURRENT_LIST_DIR}/include)