Introduction

• Open source design for racing quad. You can download and modify the designs to your liking.
• DXF files are also available in dxf/ - these are the files you send if you want to get them cut out of carbon (list of services are coming soon).
• Join our slack channel
• 3D Preview
• Facebook page

Features

• stretched X - X=140 Y=180mm wheelbase: 228mm (more control on the roll axis)
• Lots of space, the idea is to have no zip ties and nothing attached to the top plate for easy servicing
• Compatible with 5.1" Props
• Weight: 80g
• Arms can be easily swapped without unscrewing the stack
• Both 20x20 and 30.5x30.5 Stack mounting options are supported
• All screws are accessible even after complete build
• Easy stack access - large 6mm holes on the bottom plate allows you to insert/remove screws that hold your stack without any hassle
• 28.5x45mm hole pattern on the top plate to add Gopro mounts or any other 3d Printed add-ons
• CNC Millable with 3mm bit

Recommendations

• Use a three level stack: ESC, FC, and the last level should contain your VTX and RX
• If you use a buzzer get a small 9*5.5mm one
• UFL or MMCX VTX antenna
• there are no zip tie slots for a reason
• Nothing should be mounted on the top plate unless its a stand alone component like an HD camera.

Carbon parts

• BASE plate - 2mm
• BOTTOM plate - 2mm
• TOP plate - 2mm
• ARM - 4mm

Bill of materials

• 4x 25mm Aluminium, standoffs Banggood
• 8x 13-14mm M3 screws (arms) Banggood
• 8x 6mm M3 screws (standoffs) Banggood
• 8x M3 nylon insert nuts (arms) Banggood
• 1x Buzzer Banggood
• 1x XT60 Banggood

3D printable parts

(You can find all 3d printables under accessories/3D/)

• Camera mount (micro)

• XT60 mount

Builds

Latest Render