add kamal deployment

.kamal/hooks/docker-setup.sample

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+echo "Docker set up on $KAMAL_HOSTS..."

.kamal/hooks/post-app-boot.sample

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+echo "Booted app version $KAMAL_VERSION on $KAMAL_HOSTS..."

.kamal/hooks/post-deploy.sample

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+# A sample post-deploy hook
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_ROLES (if set)
+# KAMAL_DESTINATION (if set)
+# KAMAL_RUNTIME
+
+echo "$KAMAL_PERFORMER deployed $KAMAL_VERSION to $KAMAL_DESTINATION in $KAMAL_RUNTIME seconds"

.kamal/hooks/post-proxy-reboot.sample

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+echo "Rebooted kamal-proxy on $KAMAL_HOSTS"

.kamal/hooks/pre-app-boot.sample

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+echo "Booting app version $KAMAL_VERSION on $KAMAL_HOSTS..."

.kamal/hooks/pre-build.sample

@@ -0,0 +1,51 @@
+#!/bin/sh
+
+# A sample pre-build hook
+#
+# Checks:
+# 1. We have a clean checkout
+# 2. A remote is configured
+# 3. The branch has been pushed to the remote
+# 4. The version we are deploying matches the remote
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_ROLES (if set)
+# KAMAL_DESTINATION (if set)
+
+if [ -n "$(git status --porcelain)" ]; then
+  echo "Git checkout is not clean, aborting..." >&2
+  git status --porcelain >&2
+  exit 1
+fi
+
+first_remote=$(git remote)
+
+if [ -z "$first_remote" ]; then
+  echo "No git remote set, aborting..." >&2
+  exit 1
+fi
+
+current_branch=$(git branch --show-current)
+
+if [ -z "$current_branch" ]; then
+  echo "Not on a git branch, aborting..." >&2
+  exit 1
+fi
+
+remote_head=$(git ls-remote $first_remote --tags $current_branch | cut -f1)
+
+if [ -z "$remote_head" ]; then
+  echo "Branch not pushed to remote, aborting..." >&2
+  exit 1
+fi
+
+if [ "$KAMAL_VERSION" != "$remote_head" ]; then
+  echo "Version ($KAMAL_VERSION) does not match remote HEAD ($remote_head), aborting..." >&2
+  exit 1
+fi
+
+exit 0

.kamal/hooks/pre-connect.sample

@@ -0,0 +1,47 @@
+#!/usr/bin/env ruby
+
+# A sample pre-connect check
+#
+# Warms DNS before connecting to hosts in parallel
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_ROLES (if set)
+# KAMAL_DESTINATION (if set)
+# KAMAL_RUNTIME
+
+hosts = ENV["KAMAL_HOSTS"].split(",")
+results = nil
+max = 3
+
+elapsed = Benchmark.realtime do
+  results = hosts.map do |host|
+    Thread.new do
+      tries = 1
+
+      begin
+        Socket.getaddrinfo(host, 0, Socket::AF_UNSPEC, Socket::SOCK_STREAM, nil, Socket::AI_CANONNAME)
+      rescue SocketError
+        if tries < max
+          puts "Retrying DNS warmup: #{host}"
+          tries += 1
+          sleep rand
+          retry
+        else
+          puts "DNS warmup failed: #{host}"
+          host
+        end
+      end
+
+      tries
+    end
+  end.map(&:value)
+end
+
+retries = results.sum - hosts.size
+nopes = results.count { |r| r == max }
+
+puts "Prewarmed %d DNS lookups in %.2f sec: %d retries, %d failures" % [ hosts.size, elapsed, retries, nopes ]

.kamal/hooks/pre-deploy.sample

@@ -0,0 +1,122 @@
+#!/usr/bin/env ruby
+
+# A sample pre-deploy hook
+#
+# Checks the Github status of the build, waiting for a pending build to complete for up to 720 seconds.
+#
+# Fails unless the combined status is "success"
+#
+# These environment variables are available:
+# KAMAL_RECORDED_AT
+# KAMAL_PERFORMER
+# KAMAL_VERSION
+# KAMAL_HOSTS
+# KAMAL_COMMAND
+# KAMAL_SUBCOMMAND
+# KAMAL_ROLES (if set)
+# KAMAL_DESTINATION (if set)
+
+# Only check the build status for production deployments
+if ENV["KAMAL_COMMAND"] == "rollback" || ENV["KAMAL_DESTINATION"] != "production"
+  exit 0
+end
+
+require "bundler/inline"
+
+# true = install gems so this is fast on repeat invocations
+gemfile(true, quiet: true) do
+  source "https://rubygems.org"
+
+  gem "octokit"
+  gem "faraday-retry"
+end
+
+MAX_ATTEMPTS = 72
+ATTEMPTS_GAP = 10
+
+def exit_with_error(message)
+  $stderr.puts message
+  exit 1
+end
+
+class GithubStatusChecks
+  attr_reader :remote_url, :git_sha, :github_client, :combined_status
+
+  def initialize
+    @remote_url = github_repo_from_remote_url
+    @git_sha = `git rev-parse HEAD`.strip
+    @github_client = Octokit::Client.new(access_token: ENV["GITHUB_TOKEN"])
+    refresh!
+  end
+
+  def refresh!
+    @combined_status = github_client.combined_status(remote_url, git_sha)
+  end
+
+  def state
+    combined_status[:state]
+  end
+
+  def first_status_url
+    first_status = combined_status[:statuses].find { |status| status[:state] == state }
+    first_status && first_status[:target_url]
+  end
+
+  def complete_count
+    combined_status[:statuses].count { |status| status[:state] != "pending"}
+  end
+
+  def total_count
+    combined_status[:statuses].count
+  end
+
+  def current_status
+    if total_count > 0
+      "Completed #{complete_count}/#{total_count} checks, see #{first_status_url} ..."
+    else
+      "Build not started..."
+    end
+  end
+
+  private
+    def github_repo_from_remote_url
+      url = `git config --get remote.origin.url`.strip.delete_suffix(".git")
+      if url.start_with?("https://github.com/")
+        url.delete_prefix("https://github.com/")
+      elsif url.start_with?("[email protected]:")
+        url.delete_prefix("[email protected]:")
+      else
+        url
+      end
+    end
+end
+
+
+$stdout.sync = true
+
+begin
+  puts "Checking build status..."
+
+  attempts = 0
+  checks = GithubStatusChecks.new
+
+  loop do
+    case checks.state
+    when "success"
+      puts "Checks passed, see #{checks.first_status_url}"
+      exit 0
+    when "failure"
+      exit_with_error "Checks failed, see #{checks.first_status_url}"
+    when "pending"
+      attempts += 1
+    end
+
+    exit_with_error "Checks are still pending, gave up after #{MAX_ATTEMPTS * ATTEMPTS_GAP} seconds" if attempts == MAX_ATTEMPTS
+
+    puts checks.current_status
+    sleep(ATTEMPTS_GAP)
+    checks.refresh!
+  end
+rescue Octokit::NotFound
+  exit_with_error "Build status could not be found"
+end

.kamal/hooks/pre-proxy-reboot.sample

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+echo "Rebooting kamal-proxy on $KAMAL_HOSTS..."

.kamal/secrets

@@ -0,0 +1,18 @@
+# Secrets defined here are available for reference under registry/password, env/secret, builder/secrets,
+# and accessories/*/env/secret in config/deploy.yml. All secrets should be pulled from either
+# password manager, ENV, or a file. DO NOT ENTER RAW CREDENTIALS HERE! This file needs to be safe for git.
+
+# Option 1: Read secrets from the environment
+KAMAL_REGISTRY_USERNAME=$KAMAL_REGISTRY_USERNAME
+KAMAL_REGISTRY_PASSWORD=$KAMAL_REGISTRY_PASSWORD
+
+# Option 2: Read secrets via a command
+RAILS_MASTER_KEY=$(cat config/credentials/production.key)
+
+# Option 3: Read secrets via kamal secrets helpers
+# These will handle logging in and fetching the secrets in as few calls as possible
+# There are adapters for 1Password, LastPass + Bitwarden
+#
+# SECRETS=$(kamal secrets fetch --adapter 1password --account my-account --from MyVault/MyItem KAMAL_REGISTRY_PASSWORD RAILS_MASTER_KEY)
+# KAMAL_REGISTRY_PASSWORD=$(kamal secrets extract KAMAL_REGISTRY_PASSWORD $SECRETS)
+# RAILS_MASTER_KEY=$(kamal secrets extract RAILS_MASTER_KEY $SECRETS)

Dockerfile

@@ -1,41 +1,40 @@
 # syntax=docker/dockerfile:1
 # check=error=true
 
+# This Dockerfile is designed for production, not development. Use with Kamal or build'n'run by hand:
+# docker build -t jumpstart .
+# docker run -d -p 80:80 -e RAILS_MASTER_KEY=<value from config/master.key> --name jumpstart jumpstart
+
+# For a containerized dev environment, see Dev Containers: https://guides.rubyonrails.org/getting_started_with_devcontainer.html
+
 # Make sure RUBY_VERSION matches the Ruby version in .ruby-version
 ARG RUBY_VERSION=3.4.4
-FROM quay.io/evl.ms/fullstaq-ruby:${RUBY_VERSION}-jemalloc-slim AS base
-
-LABEL fly_launch_runtime="rails"
+FROM registry.docker.com/library/ruby:$RUBY_VERSION-slim AS base
 
 # Rails app lives here
 WORKDIR /rails
 
-# Update gems and bundler
-RUN gem update --system --no-document && \
-    gem install -N bundler
-
 # Install base packages
 RUN apt-get update -qq && \
-    apt-get install --no-install-recommends -y curl sqlite3 && \
+    apt-get install --no-install-recommends -y curl libjemalloc2 libvips sqlite3 postgresql-client && \
     rm -rf /var/lib/apt/lists /var/cache/apt/archives
 
 # Set production environment
-ENV BUNDLE_DEPLOYMENT="1" \
+ENV RAILS_ENV="production" \
+    BUNDLE_DEPLOYMENT="1" \
     BUNDLE_PATH="/usr/local/bundle" \
-    BUNDLE_WITHOUT="development:test" \
-    RAILS_ENV="production"
-
+    BUNDLE_WITHOUT="development"
 
 # Throw-away build stage to reduce size of final image
 FROM base AS build
 
 # Install packages needed to build gems and node modules
 RUN apt-get update -qq && \
-    apt-get install --no-install-recommends -y build-essential git libyaml-dev node-gyp pkg-config python-is-python3 && \
+    apt-get install --no-install-recommends -y build-essential git libpq-dev libyaml-dev node-gyp pkg-config python-is-python3 imagemagick libvips libvips-dev libvips-tools poppler-utils && \
     rm -rf /var/lib/apt/lists /var/cache/apt/archives
 
-# Install Node.js
-ARG NODE_VERSION=20.10.0
+# Install JavaScript dependencies
+ARG NODE_VERSION=22.11.0
 ARG PNPM_VERSION=10.8.0
 ENV PATH=/usr/local/node/bin:$PATH
 RUN curl -sL https://github.com/nodenv/node-build/archive/master.tar.gz | tar xz -C /tmp/ && \
@@ -44,14 +43,14 @@ RUN curl -sL https://github.com/nodenv/node-build/archive/master.tar.gz | tar xz
     rm -rf /tmp/node-build-master
 
 # Install application gems
-COPY Gemfile Gemfile.lock ./
+COPY Gemfile Gemfile.lock ./.ruby-version vendor ./
 RUN bundle install && \
     rm -rf ~/.bundle/ "${BUNDLE_PATH}"/ruby/*/cache "${BUNDLE_PATH}"/ruby/*/bundler/gems/*/.git && \
     bundle exec bootsnap precompile --gemfile
 
 # Install node modules
-COPY package.json ./
-RUN pnpm install
+COPY package.json pnpm-lock.yaml ./
+RUN pnpm install --frozen-lockfile
 
 # Copy application code
 COPY . .
@@ -66,25 +65,18 @@ RUN SECRET_KEY_BASE_DUMMY=1 ./bin/rails assets:precompile
 # Final stage for app image
 FROM base
 
-
-# Copy built artifacts: gems, application
-COPY --from=build "${BUNDLE_PATH}" "${BUNDLE_PATH}"
-COPY --from=build /rails /rails
-
 # Run and own only the runtime files as a non-root user for security
 RUN groupadd --system --gid 1000 rails && \
-    useradd rails --uid 1000 --gid 1000 --create-home --shell /bin/bash && \
-    mkdir /data && \
-    chown -R 1000:1000 db log storage tmp /data
+    useradd rails --uid 1000 --gid 1000 --create-home --shell /bin/bash
 USER 1000:1000
 
-# Deployment options
-ENV DATABASE_URL="sqlite3:///data/production.sqlite3"
+# Copy built artifacts: gems, application
+COPY --chown=rails:rails --from=build "${BUNDLE_PATH}" "${BUNDLE_PATH}"
+COPY --chown=rails:rails --from=build /rails /rails
 
 # Entrypoint prepares the database.
 ENTRYPOINT ["/rails/bin/docker-entrypoint"]
 
-# Start the server by default, this can be overwritten at runtime
-EXPOSE 3000
-VOLUME /data
-CMD ["./bin/rails", "server"]
+# Start server via Thruster by default, this can be overwritten at runtime
+EXPOSE 80
+CMD ["./bin/thrust", "./bin/rails", "server"]

Gemfile

@@ -39,6 +39,9 @@ gem "tzinfo-data", platforms: %i[mingw mswin x64_mingw jruby]
 # Reduces boot times through caching; required in config/boot.rb
 gem "bootsnap", require: false
 
+# Add HTTP asset caching/compression and X-Sendfile acceleration to Puma [https://github.com/basecamp/thruster/]
+gem "thruster", require: false
+
 # Use Sass to process CSS
 # gem "sassc-rails"
 
@@ -82,3 +85,5 @@ gem "pry", "0.15.2"
 gem "tailwind_merge", "~> 1.3.1"
 
 gem "rouge", "~> 4.6"
+
+gem "kamal", github: "basecamp/kamal", branch: "main"