2026.03.28-2140

Update README.md

2026.03.28-0845 (C-Life-XG1 MT7915 Fix 12)

mt7915: Reset WTBL ADM COUNTS every 5 seconds.
this might eliminate rate bias from firmware level.

2026.03.28-0549 (C-Life-XG1 MT7915: Fix 11)

Disable AMSDU .
This is a significant change that will help to reduce CPU usage a lot (i.e, soft-aggregations), this will only use hardware AMPDU (M1) Therefore, the rate will be increased more..

2026.03.28-0316 (MT7915: Fix 10)

RPS binds with CPU0,1,3 too
Remove /etc/init.d/ksoft_monitor

2026.03.26-2117 (C-Life-XG1 MT7915: Fix 10)

mt7915: binding cpu0/1/3 to napi-workq & increases the ring size

最优性能：CPU 0/1/3 总共3核并行处理协议栈， CPU 2负责TX聚合和MT715硬中断

2026.03.26-0020 (C-Life-XG1 MT7915: Fix 9)

mt7915: optimize MPDU buf_zie / desnsity more kindly for WIFI5 dev.

2026.03.25-1142 (C-Life-XG1 MT7915 Fix 8)

mt7915: optimize parameters

1. irq_delay: 0x00080008 (TX:8us/RX:8us)
2. max_mcu_poll_cnt: 4 (mt7915_poll_tx: napi_schedule max 4 loops)
3. always setting target_mask = 0 in procd: ksoft-monitor