MMM-WH2600

This is a module for the MagicMirror².

A Module for MagicMirror² designed to integrate with a WH2600 System. Dependent on your configuration it can display several statistics.

• Temperature and humidity for all registered sensors
• Wind data
• UV index
• Rain data

Installation

Go to your MagicMirror folder and run the following commands:

cd modules
git clone https://github.com/st3v0rr/MMM-WH2600.git
cd MMM-WH2600
npm i

Wait until npm has finished.

Update

Go to your MagicMirror folder and run the following commands:

cd modules/MMM-WH2600
git pull
npm i

Using the module

To use this module, add the following configuration block to the modules array in the config/config.js file:

Basic config

{
    module: 'MMM-WH2600',
    position: 'upper_third',
    config: {
        ipWH2600: "XX.XX.XX.XX" //IP of the WH2600 data logger
    }
}

Advanced config with additional sensors registered

{
    module: 'MMM-WH2600',
    position: 'upper_third',
    config: {
        ipWH2600: "XX.XX.XX.XX", //IP of the WH2600 data logger
        locationInfo: "Mystreet 1, 1234 Mylocation", //Some additional informations to the location of the WH2600
        locationMetersAboveSeaLevel: 300, //Nice to have for correct calcluation of the atmospheric pressure
        indoorSensors: [ //all your indoor temperature  sensors
          { //default
            label: "entrance", //place a useful location info
            temp: "intemp", //is the default indoor sensor
            humid: "inhumid", //is the default indoor humidity
            ventilation: false //calculate and display ventilation recommendation
          },
          { //optional: additional sensors
            label: "living room", //place a useful explanation e. g. "living room"
            temp: "temp1", //it's always "temp+channelnumber" up to 8
            humid: "humid1", //it's always "humid+channelnumber" up to 8
            ventilation: true //calculate and display ventilation recommendation
          },
        ],
        outdoorSensors: [ //all your outdoor temperature  sensors
          { //default
            label: "garden", //place a useful location info
            temp: "outtemp", //is the default indoor sensor
            humid: "outhumid" //is the default indoor humidity
          },
          { //optional: additional sensors
            label: "garage", //place a useful explanation e. g. "living room"
            temp: "temp2", //it's always "temp+channelnumber" up to 8
            humid: "humid2" //it's always "humid+channelnumber" up to 8
          },
        ]
    }
}

Configuration options

Option	Description
ipWH2600	Required IP of the WH2600 data logger
portWH2600	Optional Port of the WH2600 data logger
locationInfo	Optional Some additional informations to the location of the WH2600
locationMetersAboveSeaLevel	Optional Nice to have for correct calcluation of the atmospheric pressure
tempSwitchInterval	Optional Time between switching the temp sensors (default is 5 seconds)
indoorSensors	Optional Show additional indoor sensors (see advanced config)
outdoorSensors	Optional Show additional outdoor sensors (see advanced config)

Samples