-
-
Notifications
You must be signed in to change notification settings - Fork 458
Charging Station Compatibility
Kaldanetus edited this page Jan 28, 2026
·
102 revisions
This list keeps track of which charging stations work (and which don't) with SteVe.
If you tested SteVe, with a charging station not on this list, please add the result or contact us so we can do it. We need the following details: Charging station manufacturer, charging station model, charging station firmware version (if known), SteVe version, OCPP version used (e.g. OCPP1.5S), status (fully working, partially working, not working).
| Charging Station Manufacturer | Model | Firmware | SteVe | OCPP | Status |
|---|---|---|---|---|---|
| EBG ComplEo | HEADd 41 | ? | 2.0.6 | OCPP1.2S | working |
| Delta Electronics | "AC Mini" EVMU3015MWS | v04.04.30.03 | 3.0.1 @bad5736 | OCPP1.6J | working (partially tested) |
| Keba | KeContact P30 x-series Master with Slave | V3.09.14 | 3.0.2 | OCPP1.5 | fully working |
| Alfen | ICU Eve Mini with card reader | 3.4.0-2990 | 3.0.2 | occp1.6J | working (partially tested) |
| NewMotion | docile-charge-point | 0.3.0 | 668c470 | OCPP1.6J | working |
| ENSTO | Chago EVF200 | 4.21-3390 | 3.0.2 | OCPP1.6J | working(partially tested |
| TRITIUM | Veefil-RT | v2.1.7 | 3.2.0 | OCPP1.6J | working |
| SETEC Power | SET450-40B and SET450-100Y | v2.05 | 3.2.0 | OCPP1.5S | Fully working |
| ABL | eMH3 - eichrechtskonform | 1.8 | 3.4.8 | OCPP1.6S | Fully working |
| ABL | eMH2 / eMH3 | 1.6p2 | 3.4.2 | OCPP1.5S, OCPP1.6S | working |
| Alfen BV | NG910-60023 | ---------- | 3.4.1 | OCPP1.6J | working (partially tested) |
| EVB | BDC180-D | 1.1.17 | 3.9.0 - 3.10.0 | OCPP1.6J | Fully working |
| chargebyte (formerly in-tech) | ---------- | ---------- | 3.4.1 | OCPP1.6J | working (partially tested) |
| DEKRA | Virtual Charger OCTT | OCA (Not Listed) | 3.4.1 | OCPP1.6J | working (partially tested) |
| System Level Solution | ---------- | ---------- | 3.4.1 | OCPP1.6J | working (partially tested) |
| Mennekes | ---------- | ---------- | 3.4.1 | OCPP1.6J | working (partially tested) |
| EVTEC | "&charge"-family | 3.x | 3.4.1 | OCPP1.5, OCPP1.6 | working (partially tested) |
| Detas EVchargers | SIRIUS DC | 1.08.708 | 3.4.2 | OCPP1.6J | working (partially tested) |
| Efacec | QC40B | ---------- | 3.4.3 | OCPP1.5S | working (partially tested) |
| Efacec | QC90B | ---------- | 3.4.3 | OCPP1.6J | working (partially tested) |
| Efacec | QC150B | ---------- | 3.4.3 | OCPP1.5S | working (partially tested) |
| ABB | Terra 54HV | ---------- | 3.4.3 | OCPP1.6J | working (partially tested) |
| NANJING POWERCORE TECH | AC002 43kw | ? | 3.3.0 | ? | working |
| NANJING POWERCORE TECH | AC003T27 | 4.6.0 | 3.5.0 | OCPP1.6J | working |
| Mennekes | SMART 22 | 0.0.4 Build 3482 | 3.4.3 | OCPP1.5S | working |
| Mennekes | Professional 22 | 5.12.0-10901 | 3.4.4 | OCPP1.6J | working |
| Mennekes | Premium 11 | 0.0.4 Build 3585 | 3.4.4 | OCPP1.6J | working |
| Webasto | Live | ? | 3.4.3 | OCPP1.6J | working |
| EVBox | Elvi (11kWh) | ? | 3.4.4 | OCPP1.6J | working |
| Compleo (formerly innogy) | eBox smart | 2.6.1 | 3.9.0 | OCPP1.6J | working |
| ArduinoOcpp | matth-x/ArduinoOcpp | ---------- | 3.4.4 | OCPP1.6J | working |
| OpenEVSE | matth-x/ArduinoOcpp | ESP32 v4.1.0+ | 3.4.4 | OCPP1.6J | working |
| Alpitronic | hypercharger HYC_150 | hyc_v1.3.0 | 3.4.3 | ocpp1.6J | working (partially tested) |
| United Chargers | GRIZZL-E GRS-14-24-P | 05.41 | 3.4.5 | ocpp1.6J | working (partially tested) |
| TELLUS POWER | 4120 | ? | 3.4.5 | OCPP1.6J | working |
| Wall Box Chargers | CMX2-0-2-2 (Commander 2) | 5.2.8 | 3.4.5 | OCPP1.6J | working (partially tested) |
| Wall Box Chargers | PLP1-0-2-2 (Pulsar Plus) | 5.3.19 | 3.4.5 | OCPP1.6J | working (partially tested) |
| Hager | Witty Park | 1.0.7.4/4.1.2.4 | 3.4.5 | OCPP1.5S | working (partially tested) |
| Joint | EVC10 (c8) | V00.00.40 | 3.4.5 | OCPP1.6J | working (partially tested) |
| Bender Charge Controller | cc612 | 4.53-5444-a66730dde | 3.4.8 | OCPP1.6J | working (partially tested) |
| Entratek Power Dot Eco | EN+ | 37 | 3.4.8 | OCPP1.6J | working (partially tested) |
| ArkTech | AKEV22 | ARK-0111000-20211206 | 3.4.9 | OCCP1.6J | working (partially tested) |
| ArkTech | eFlex 40DC | 2.1.3-6-LAN | 3.4.9 | OCCP1.6J | working (partially tested) |
| ROLEC | QUANTUM | Unknown | ver. 3.4.9 | OCCP1.6J | working |
| ROLEC | Wallpod | Unknown | ver. 3.4.9 | OCCP1.6J | working |
| Wallbox Spain | Commander 2 | Unknown | 3.4.9 | OCCP1.6J | working (partially tested) |
| Wallbox Spain | Copper SB | Unknown | 3.4.9 | OCCP1.6J | working (partially tested) |
| Schneider Electric | EVlink Smart Wallbox EVB1A22P4RI | ver. 3.4 RUN 4 | 3.4.9 | OCCP1.6J | working (partially tested) |
| WEG | WEMOB G2 | ---------- | ——————- | OCPP1.6J | working |
| Zaptec | PRO | 3.2.5.3 | 3.4.9 | ocpp1.6J | working (partially tested) |
| Go-e | Go-e Charger V3 | 054.7 | 3.4.9 | OCPP v1.6 | working (partially tested) |
| Go-e | Go-e Charger Gemini | 054.7 | 3.4.9 | OCPP v1.6 | working |
| ABB | TAC W22-T-R-C-0 | V1.5.2 | 3.4.9 | OCCP1.6J | partially working |
| Homecharge | HC11L | 1.0.8 | 3.4.9 | OCPP v1.6 | working (partially tested) |
| ETREL | INCH PRO G-PC1Z5BY40 | V5.0.1 | 3.4.9 | OCCP1.6J | working (partially tested) |
| Juice Technology | Juice Charger me | 5.20.0-12975 | 3.4.9 | OCCP1.6J | working |
| Phoenix Contact | CHARX SEC-3000 | 1.2.3 | 3.5.0 | OCCP1.6J | working |
| Wallbe | Pro Plus | SL-01.04.21 | ? | OCCP1.6J | working |
| SCHRACK | i-CHARGE CION Pro | 5.29.1-13419-b2601997d8 | 3.5.0 | OCCP1.5S | working |
| Circontrol | eVolve Smart T | 3.9.1 | 3.6.0 | OCPP1.6J | working (partially tested |
| Topdon | PulseQ Level 2 EV Charger | AC_DUL_2.11TO | 3.6.0 | OCPP1.6J | Working (partially tested) |
| Innogy | eBox smart | 2.2.0 | 3.6.0 (docker) | OCPP 1.6j | working (partially tested) |
| EM2GO | Pro Power | AC_DE3_1.12 | 3.7.1 | OCPP 1.6j | working |
| EM2GO | Duo Power | 1.31.3 | 3.7.1 | OCPP 1.6j | working |
| ZEROVA | CSU3 | 3.0.5 | 3.7.1 | OCPP 1.6j | working |
| cFos eMobility | cfos-power-brain | 2.2.1 | 3.7.1 | OCPP 1.6j | working |
| Vestel | EVC04 | v3.118.0 | 3.7.1 | OCPP 1.6j | working |
| Hager | XEV601C | v9.0.1.0 / v1.0.0.0 | 3.6.0 | OCPP 1.6j | working |
For Alfen NG910 and NG920 charging stations manufactured before 31-12-2024 (exact cutoff date to be confirmed), enabling WSS requires installing additional firmware to add a root CA certificate to the charger.
Without this step, the charger will not trust the server certificate and the WSS connection will fail.
If you are using Let's Encrypt as your Certificate Authority, you must install the following firmware file on the charger: isrgrootx1-B 3.fwi.
References: