support for WAVESHARE-ESP32-S3-LCD7

CYD-Klipper/boards/esp32-WAVESHARE-ESP32-S3-LCD7.json

@@ -0,0 +1,142 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "'-D ARDUINO_ESP32S3_DEV'",
+      "'-D BOARD_HAS_PSRAM'",
+      "'-D ARDUINO_USB_MODE=1'",
+      "'-D ARDUINO_RUNNING_CORE=1'",
+      "'-D ARDUINO_EVENT_RUNNING_CORE=1'",
+      "'-D ARDUINO_USB_CDC_ON_BOOT=0'",
+      "'-D WAVESHARE_ESP32_S3_LCD7'",
+      "'-D LCD_WIDTH=800'",
+      "'-D LCD_HEIGHT=480'",
+      "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
+      "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
+      "'-D GPIO_BCKL=2'",
+      "'-D LCD_ST7262_PAR'",
+      "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(14.2*1000000)'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_H_RES=LCD_WIDTH'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_V_RES=LCD_HEIGHT'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_PULSE_WIDTH=4'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_BACK_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_FRONT_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_PULSE_WIDTH=4'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_BACK_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_FRONT_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_HSYNC_IDLE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_VSYNC_IDLE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_DE_IDLE_HIGH=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_ACTIVE_NEG=true'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_IDLE_HIGH=false'",
+      "'-D ST7262_PANEL_CONFIG_DATA_WIDTH=16'",
+      "'-D ST7262_PANEL_CONFIG_SRAM_TRANS_ALIGN=4'",
+      "'-D ST7262_PANEL_CONFIG_PSRAM_TRANS_ALIGN=64'",
+      "'-D ST7262_PANEL_CONFIG_HSYNC_GPIO_NUM=46'",
+      "'-D ST7262_PANEL_CONFIG_VSYNC_GPIO_NUM=3'",
+      "'-D ST7262_PANEL_CONFIG_DE_GPIO_NUM=5'",
+      "'-D ST7262_PANEL_CONFIG_PCLK_GPIO_NUM=7'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R0=1'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R1=2'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R2=42'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R3=41'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R4=40'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G0=39'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G1=0'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G2=45'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G3=48'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G4=47'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G5=21'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B0=14'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B1=38'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B2=18'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B3=17'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B4=10'",
+      "'-D ST7262_PANEL_CONFIG_DISP_GPIO_NUM=GPIO_NUM_NC'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_DISP_ACTIVE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_RELAX_ON_IDLE=false'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_FB_IN_PSRAM=true'",
+      "'-D BOARD_HAS_TOUCH'",
+      "'-D TOUCH_GT911_I2C'",
+      "'-D GT911_I2C_HOST=I2C_NUM_0'",
+      "'-D GT911_I2C_CONFIG_SDA_IO_NUM=8'",
+      "'-D GT911_I2C_CONFIG_SCL_IO_NUM=9'",
+      "'-D GT911_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+      "'-D GT911_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+      "'-D GT911_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+      "'-D GT911_I2C_CONFIG_CLK_FLAGS=I2C_SCLK_SRC_FLAG_FOR_NOMAL'",
+      "'-D GT911_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS'",
+      "'-D GT911_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+      "'-D GT911_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+      "'-D GT911_IO_I2C_CONFIG_LCD_CMD_BITS=16'",
+      "'-D GT911_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+      "'-D GT911_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+      "'-D GT911_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+      "'-D GT911_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+      "'-D GT911_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+      "'-D GT911_TOUCH_CONFIG_RST_GPIO_NUM=38'",
+      "'-D GT911_TOUCH_CONFIG_INT_GPIO_NUM=18'",
+      "'-D GT911_TOUCH_CONFIG_LEVELS_RESET=0'",
+      "'-D GT911_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+      "'-D TOUCH_SWAP_XY=false'",
+      "'-D TOUCH_SWAP_X=false'",
+      "'-D TOUCH_SWAP_Y=false'",
+      "'-D UNDEF___BOARD_HAS_TF'",
+      "'-D UNDEF___TF_CS=10'",
+      "'-D UNDEF___TF_SPI_MOSI=11'",
+      "'-D UNDEF___TF_SPI_SCLK=12'",
+      "'-D UNDEF___TF_SPI_MISO=13'",
+      "-DCYD_SCREEN_HEIGHT_PX=LCD_HEIGHT",
+      "-DCYD_SCREEN_WIDTH_PX=LCD_WIDTH",
+      "-DROTATION_INVERTED=LV_DISP_ROT_180",
+      "-DROTATION_NORMAL=LV_DISP_ROT_NONE",
+      "-DCYD_SCREEN_GAP_PX=15",
+      "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=60",
+      "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=60",
+      "-DCYD_SCREEN_FONT=lv_font_montserrat_22",
+      "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_16",
+      "-DCYD_SCREEN_SIDEBAR_SIZE_PX=70",
+      "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+      "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      [
+        "0x303A",
+        "0x1001"
+      ]
+    ],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": [
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "esp32-WAVESHARE-ESP32-S3-LCD7",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://de.aliexpress.com/item/1005007203795807.html",
+  "vendor": "Waveshare"
+}

CYD-Klipper/platformio.ini

@@ -141,4 +141,8 @@ lib_deps =
     plageoj/UrlEncode
     bblanchon/ArduinoJson@^7.0.0
 	knolleary/PubSubClient@^2.8
-    WiFiClientSecure
+    WiFiClientSecure
+
+
+[env:ESP32-WAVESHARE-ESP32-S3-LCD7]
+board = esp32-WAVESHARE-ESP32-S3-LCD7

ci.json

@@ -63,5 +63,11 @@
         "site": true,
         "s3": true,
         "brand": "Guition"
+    },
+    "esp32-WAVESHARE-ESP32-S3-LCD7": {
+        "name": "Waveshare ESP32-S3-Touch-LCD-7 (7\" Capacitive)",
+        "site": true,
+        "s3": true,
+        "brand": "Waveshare"
     }
 }