fix: typo on the variables

README.md

@@ -117,8 +117,8 @@ Then perform the following commands on the root folder:
 | delete\_default\_internet\_gateway\_routes | If set, ensure that all routes within the network specified whose names begin with 'default-route' and with a next hop of 'default-internet-gateway' are deleted | `bool` | `false` | no |
 | description | An optional description of this resource. The resource must be recreated to modify this field. | `string` | `""` | no |
 | egress\_rules | List of egress rules. This will be ignored if variable 'rules' is non-empty | <pre>list(object({<br>    name                    = string<br>    description             = optional(string, null)<br>    disabled                = optional(bool, null)<br>    priority                = optional(number, null)<br>    destination_ranges      = optional(list(string), [])<br>    source_ranges           = optional(list(string), [])<br>    source_tags             = optional(list(string))<br>    source_service_accounts = optional(list(string))<br>    target_tags             = optional(list(string))<br>    target_service_accounts = optional(list(string))<br><br>    allow = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    deny = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    log_config = optional(object({<br>      metadata = string<br>    }))<br>  }))</pre> | `[]` | no |
-| enable\_ipv6\_ula | Enabled IPv6 ULA, this is a permenant change and cannot be undone! (default 'false') | `bool` | `false` | no |
-| firewall\_rules | This is DEPRICATED and available for backward compatiblity. Use ingress\_rules and egress\_rules variables. List of firewall rules | <pre>list(object({<br>    name                    = string<br>    description             = optional(string, null)<br>    direction               = optional(string, "INGRESS")<br>    disabled                = optional(bool, null)<br>    priority                = optional(number, null)<br>    ranges                  = optional(list(string), [])<br>    source_tags             = optional(list(string))<br>    source_service_accounts = optional(list(string))<br>    target_tags             = optional(list(string))<br>    target_service_accounts = optional(list(string))<br><br>    allow = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    deny = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    log_config = optional(object({<br>      metadata = string<br>    }))<br>  }))</pre> | `[]` | no |
+| enable\_ipv6\_ula | Enabled IPv6 ULA, this is a permanent change and cannot be undone! (default 'false') | `bool` | `false` | no |
+| firewall\_rules | This is DEPRECATED and available for backward compatibility. Use ingress\_rules and egress\_rules variables. List of firewall rules | <pre>list(object({<br>    name                    = string<br>    description             = optional(string, null)<br>    direction               = optional(string, "INGRESS")<br>    disabled                = optional(bool, null)<br>    priority                = optional(number, null)<br>    ranges                  = optional(list(string), [])<br>    source_tags             = optional(list(string))<br>    source_service_accounts = optional(list(string))<br>    target_tags             = optional(list(string))<br>    target_service_accounts = optional(list(string))<br><br>    allow = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    deny = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    log_config = optional(object({<br>      metadata = string<br>    }))<br>  }))</pre> | `[]` | no |
 | ingress\_rules | List of ingress rules. This will be ignored if variable 'rules' is non-empty | <pre>list(object({<br>    name                    = string<br>    description             = optional(string, null)<br>    disabled                = optional(bool, null)<br>    priority                = optional(number, null)<br>    destination_ranges      = optional(list(string), [])<br>    source_ranges           = optional(list(string), [])<br>    source_tags             = optional(list(string))<br>    source_service_accounts = optional(list(string))<br>    target_tags             = optional(list(string))<br>    target_service_accounts = optional(list(string))<br><br>    allow = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    deny = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    log_config = optional(object({<br>      metadata = string<br>    }))<br>  }))</pre> | `[]` | no |
 | internal\_ipv6\_range | When enabling IPv6 ULA, optionally, specify a /48 from fd20::/20 (default null) | `string` | `null` | no |
 | mtu | The network MTU (If set to 0, meaning MTU is unset - defaults to '1460'). Recommended values: 1460 (default for historic reasons), 1500 (Internet default), or 8896 (for Jumbo packets). Allowed are all values in the range 1300 to 8896, inclusively. | `number` | `0` | no |

metadata.yaml

@@ -159,11 +159,11 @@ spec:
             }))
         defaultValue: []
       - name: enable_ipv6_ula
-        description: Enabled IPv6 ULA, this is a permenant change and cannot be undone! (default 'false')
+        description: Enabled IPv6 ULA, this is a permanent change and cannot be undone! (default 'false')
         varType: bool
         defaultValue: false
       - name: firewall_rules
-        description: This is DEPRICATED and available for backward compatiblity. Use ingress_rules and egress_rules variables. List of firewall rules
+        description: This is DEPRECATED and available for backward compatibility. Use ingress_rules and egress_rules variables. List of firewall rules
         varType: |-
           list(object({
               name                    = string

modules/firewall-rules/README.md

@@ -44,7 +44,7 @@ module "firewall_rules" {
 | ingress\_rules | List of ingress rules. This will be ignored if variable 'rules' is non-empty | <pre>list(object({<br>    name                    = string<br>    description             = optional(string, null)<br>    disabled                = optional(bool, null)<br>    priority                = optional(number, null)<br>    destination_ranges      = optional(list(string), [])<br>    source_ranges           = optional(list(string), [])<br>    source_tags             = optional(list(string))<br>    source_service_accounts = optional(list(string))<br>    target_tags             = optional(list(string))<br>    target_service_accounts = optional(list(string))<br><br>    allow = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    deny = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    log_config = optional(object({<br>      metadata = string<br>    }))<br>  }))</pre> | `[]` | no |
 | network\_name | Name of the network this set of firewall rules applies to. | `string` | n/a | yes |
 | project\_id | Project id of the project that holds the network. | `string` | n/a | yes |
-| rules | This is DEPRICATED and available for backward compatiblity. Use ingress\_rules and egress\_rules variables. List of custom rule definitions | <pre>list(object({<br>    name                    = string<br>    description             = optional(string, null)<br>    direction               = optional(string, "INGRESS")<br>    disabled                = optional(bool, null)<br>    priority                = optional(number, null)<br>    ranges                  = optional(list(string), [])<br>    source_tags             = optional(list(string))<br>    source_service_accounts = optional(list(string))<br>    target_tags             = optional(list(string))<br>    target_service_accounts = optional(list(string))<br><br>    allow = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    deny = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    log_config = optional(object({<br>      metadata = string<br>    }))<br>  }))</pre> | `[]` | no |
+| rules | This is DEPRECATED and available for backward compatibility. Use ingress\_rules and egress\_rules variables. List of custom rule definitions | <pre>list(object({<br>    name                    = string<br>    description             = optional(string, null)<br>    direction               = optional(string, "INGRESS")<br>    disabled                = optional(bool, null)<br>    priority                = optional(number, null)<br>    ranges                  = optional(list(string), [])<br>    source_tags             = optional(list(string))<br>    source_service_accounts = optional(list(string))<br>    target_tags             = optional(list(string))<br>    target_service_accounts = optional(list(string))<br><br>    allow = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    deny = optional(list(object({<br>      protocol = string<br>      ports    = optional(list(string))<br>    })), [])<br>    log_config = optional(object({<br>      metadata = string<br>    }))<br>  }))</pre> | `[]` | no |
 
 ## Outputs
 

modules/firewall-rules/metadata.yaml

@@ -155,7 +155,7 @@ spec:
         varType: string
         required: true
       - name: rules
-        description: This is DEPRICATED and available for backward compatiblity. Use ingress_rules and egress_rules variables. List of custom rule definitions
+        description: This is DEPRECATED and available for backward compatibility. Use ingress_rules and egress_rules variables. List of custom rule definitions
         varType: |-
           list(object({
               name                    = string

modules/firewall-rules/variables.tf

@@ -25,7 +25,7 @@ variable "network_name" {
 }
 
 variable "rules" {
-  description = "This is DEPRICATED and available for backward compatiblity. Use ingress_rules and egress_rules variables. List of custom rule definitions"
+  description = "This is DEPRECATED and available for backward compatibility. Use ingress_rules and egress_rules variables. List of custom rule definitions"
   default     = []
   type = list(object({
     name                    = string

modules/vpc/README.md

@@ -34,7 +34,7 @@ module "vpc" {
 | bgp\_inter\_region\_cost | Specifies the BGP inter-region cost mode. Valid values are `DEFAULT` or `ADD_COST_TO_MED`. | `string` | `null` | no |
 | delete\_default\_internet\_gateway\_routes | If set, ensure that all routes within the network specified whose names begin with 'default-route' and with a next hop of 'default-internet-gateway' are deleted | `bool` | `false` | no |
 | description | An optional description of this resource. The resource must be recreated to modify this field. | `string` | `""` | no |
-| enable\_ipv6\_ula | Enabled IPv6 ULA, this is a permenant change and cannot be undone! (default 'false') | `bool` | `false` | no |
+| enable\_ipv6\_ula | Enabled IPv6 ULA, this is a permanent change and cannot be undone! (default 'false') | `bool` | `false` | no |
 | internal\_ipv6\_range | When enabling IPv6 ULA, optionally, specify a /48 from fd20::/20 (default null) | `string` | `null` | no |
 | mtu | The network MTU (If set to 0, meaning MTU is unset - defaults to '1460'). Recommended values: 1460 (default for historic reasons), 1500 (Internet default), or 8896 (for Jumbo packets). Allowed are all values in the range 1300 to 8896, inclusively. | `number` | `0` | no |
 | network\_firewall\_policy\_enforcement\_order | Set the order that Firewall Rules and Firewall Policies are evaluated. Valid values are `BEFORE_CLASSIC_FIREWALL` and `AFTER_CLASSIC_FIREWALL`. (default null or equivalent to `AFTER_CLASSIC_FIREWALL`) | `string` | `null` | no |

modules/vpc/metadata.yaml

@@ -103,7 +103,7 @@ spec:
         varType: string
         defaultValue: ""
       - name: enable_ipv6_ula
-        description: Enabled IPv6 ULA, this is a permenant change and cannot be undone! (default 'false')
+        description: Enabled IPv6 ULA, this is a permanent change and cannot be undone! (default 'false')
         varType: bool
         defaultValue: false
       - name: internal_ipv6_range

modules/vpc/variables.tf

@@ -62,7 +62,7 @@ variable "mtu" {
 
 variable "enable_ipv6_ula" {
   type        = bool
-  description = "Enabled IPv6 ULA, this is a permenant change and cannot be undone! (default 'false')"
+  description = "Enabled IPv6 ULA, this is a permanent change and cannot be undone! (default 'false')"
   default     = false
 }
 

variables.tf

@@ -95,7 +95,7 @@ variable "firewall_rules" {
       metadata = string
     }))
   }))
-  description = "This is DEPRICATED and available for backward compatiblity. Use ingress_rules and egress_rules variables. List of firewall rules"
+  description = "This is DEPRECATED and available for backward compatibility. Use ingress_rules and egress_rules variables. List of firewall rules"
   default     = []
 }
 
@@ -184,7 +184,7 @@ variable "egress_rules" {
 
 variable "enable_ipv6_ula" {
   type        = bool
-  description = "Enabled IPv6 ULA, this is a permenant change and cannot be undone! (default 'false')"
+  description = "Enabled IPv6 ULA, this is a permanent change and cannot be undone! (default 'false')"
   default     = false
 }