cleaned up and added a config section

examples/MultiSwitch/MultiSwitch.ino

@@ -8,18 +8,31 @@
 boolean connectWifi();
 
 //on/off callbacks
-void lightOn();
-void lightOff();
-void secondOn();
-void secondOff();
+void switch1On();
+void switch1Off();
+void switch2On();
+void switch2Off();
 
-//------- Replace the following! ------
-char ssid[] = "xxx";       // your network SSID (name)
-char password[] = "yyyy";  // your network key
+//#####################################################################
+//########## config your switch here ##################################
+//#####################################################################
+
+const char ssid[] = "xxx";      // your network SSID (name)
+const char password[] = "yyyy"; // your network key
+
+const char switch1Name[] = "xyz1";  // Alexa Name of the first Switch
+const int switch1Pin = 1;   // Switch 1 Pin
+
+const char switch2Name[] = "xyz2";  // Alexa Name of the second Switch
+const int switch2Pin = 2;   //Switch 2 Pin
+
+//#####################################################################
+//########## end of config area #######################################
+//#####################################################################
 
 WemoManager wemoManager;
-WemoSwitch *light = NULL;
-WemoSwitch *second = NULL;
+WemoSwitch *switch1 = NULL;
+WemoSwitch *switch2 = NULL;
 
 const int ledPin = BUILTIN_LED;
 
@@ -31,16 +44,30 @@ void setup()
   // connected
   WiFi.mode(WIFI_STA);
   WiFi.disconnect();
+  pinMode(ledPin, OUTPUT); // initialize digital ledPin as an output.
+  pinMode(switch1Pin, OUTPUT); // initialize digital switch1Pin as an output.
+  pinMode(switch2Pin, OUTPUT); // initialize digital switch2Pin as an output.
+
   delay(100);
-
+
+  digitalWrite(ledPin, HIGH); // Wemos BUILTIN_LED is active Low, so high is off
+  digitalWrite(switch1Pin, HIGH); // Wemos switch1Pin is active Low, so high is off
+  digitalWrite(switch2Pin, HIGH); // Wemos switch2Pin is active Low, so high is off 
+
   // Attempt to connect to Wifi network:
   Serial.print("Connecting Wifi: ");
   Serial.println(ssid);
   WiFi.begin(ssid, password);
   while (WiFi.status() != WL_CONNECTED) {
     Serial.print(".");
-    delay(500);
-  }
+    delay(200);
+    if(digitalRead(BUILTIN_LED)==LOW){
+        digitalWrite(BUILTIN_LED, HIGH);
+      }else{
+        digitalWrite(BUILTIN_LED, LOW);
+      }
+    }
+  digitalWrite(ledPin, LOW);
   Serial.println("");
   Serial.println("WiFi connected");
   Serial.println("IP address: ");
@@ -49,37 +76,33 @@ void setup()
 
   wemoManager.begin();
   // Format: Alexa invocation name, local port no, on callback, off callback
-  light = new WemoSwitch("test lights", 80, lightOn, lightOff);
-  second = new WemoSwitch("second lights", 81, secondOn, secondOff);
-  wemoManager.addDevice(*light);
-  wemoManager.addDevice(*second);
-
-  pinMode(ledPin, OUTPUT); // initialize digital ledPin as an output.
-  delay(10);
-  digitalWrite(ledPin, HIGH); // Wemos BUILTIN_LED is active Low, so high is off
+  switch1 = new WemoSwitch(switch1Name, 80, switch1On, switch1Off);
+  switch2 = new WemoSwitch(switch2Name, 81, switch2On, switch2Off);
+  wemoManager.addDevice(*switch1);
+  wemoManager.addDevice(*switch2);
 }
 
 void loop()
 {
   wemoManager.serverLoop();
 }
 
-void lightOn() {
+void switch1On() {
     Serial.print("Switch 1 turn on ...");
-    digitalWrite(ledPin, LOW);
+    digitalWrite(switch1Pin, LOW);
 }
 
-void lightOff() {
+void switch1Off() {
     Serial.print("Switch 1 turn off ...");
-    digitalWrite(ledPin, HIGH);
+    digitalWrite(switch1Pin, HIGH);
 }
 
-void secondOn() {
+void switch2On() {
     Serial.print("Switch 2 turn on ...");
-    digitalWrite(ledPin, LOW);
+    digitalWrite(switch2Pin, LOW);
 }
 
-void secondOff() {
+void switch2Off() {
     Serial.print("Switch 2 turn off ...");
-    digitalWrite(ledPin, HIGH);
+    digitalWrite(switch2Pin, HIGH);
 }