TL‑WPA8630P

(Home Assistant Custom Integration)

Monitor your TP‑Link WPA8630 series powerline Wi‑Fi extender from Home Assistant: Wi‑Fi client counts, SSIDs, channels, PLC link rates, and a “degraded PLC” binary sensor. The integration logs into the device, collects status (firmware/WLAN/clients/PLC), and exposes derived sensors for quick dashboards.

---

Derived from

Python code adapted and derived from TL-WPA4220 (so maybe this device type is also working)
see: https://github.com/3v1n0/TL-WPA4220-python

The original TLA_4220.py provides a command line interface which can be used to check if it's working in the own or in the HA environment:

python3 TL_WPA4220.py -p <your-password> <your-ip> show

This code part has LGPL.

---

Features

• Primary status sensor (TP‑Link WPA4220 Status)
  State: connected or error. Attributes include FirmwareInfo, WlanStatus, WifiClients, and PlcDeviceStatus. Passwords from the WLAN status are masked with hidden.
• Wi‑Fi client counters with helpful attributes:
  • WLAN Clients (summary) – all bands
  • WLAN Clients 2.4 GHz
  • WLAN Clients 5 GHz
    Each exposes client names and top 12 by packets attributes (pre‑sorted by packet count).
• SSID & channel sensors: SSID 2.4 GHz, SSID 5 GHz, WLAN Kanal 2.4 GHz, WLAN Kanal 5 GHz.
• PLC link‑rate sensors: PLC Max RX (Mbit/s), PLC Max TX (Mbit/s), PLC min RX (Mbit/s), PLC min TX (Mbit/s) (unit: Mbit/s).
• Binary sensors: WLAN 2.4 GHz aktiv, WLAN 5 GHz aktiv (device class: connectivity) and PLC unter 100 Mbit/s? (device class: problem, threshold = 100 Mbit/s).
• Device Registry integration: model/firmware/hardware are written to the registry and Wi‑Fi MACs are registered as connections. Configuration URL points to http://<device-ip>/.
• Update cadence: by default every 2 minutes. Derived sensors update immediately after the main sensor refreshes (via dispatcher).

---

Installation

1. Create a folder in your Home Assistant config:
   custom_components/tplink_wpa4220/
2. Copy the integration files into that folder.
3. Restart Home Assistant.

---

Configuration

Add the integration from Settings → Devices & Services → Add Integration and provide:

• IP address of the device
• Password (the same one used for the device’s web UI)
• Max IPs in Attributes teh number of shown IPs in the attributes (default 12)

The integration stores these as a config entry and will begin polling automatically. If the primary sensor shows error, check the error attribute and your credentials/IP; details are also written to Home Assistant’s log.

---

Directory structure

custom_components/technicolor_cga/
├─ __init__.py
├─ config_flow.py
├─ manifest.json
├─ const.py
├─ TL_WPA4220.py
└─ sensor.p

How it works (under the hood)

• The main entity logs in using a small helper (TL_WPA4220), fetches firmware info, PLC device status, WLAN status, and Wi‑Fi clients in parallel, then logs out. Data is shared with derived entities via a dispatcher signal so they update immediately after each refresh.
• During updates, device‑registry metadata (model, SW/HW versions, MAC connections) is refreshed for the HA device representing the extender.

---

Notes & limitations

• Only information available from the device’s web interface is exposed; some attributes are summarized (e.g., top‑talkers by packets).
• Tested with TL‑WPA8630P; but the reused API code was intially designed for the WPA4220 family (model is read from the device and written to the registry)
• Somebody rpeorted that TL-PA9020P is also working with some minor adaptations (eliminating wlan stuff). The patch is in, but without beeing tested.

Changes

• add device info, minor bugs: v0.91
• Sensors for PLC TX/RX, PLC Peers, #Wlan Clients, Wlan Channel, .... : v0.93
• adding attributes to the sensors: v0.931
• HACS installation: v1.0.5