boards: adafruit: fix compliance check format

Fix errors detected by compliance check.

Signed-off-by: Sylvio Alves <[email protected]>

Author: sylvioalves

boards/adafruit/feather_rfm95_rp2040/adafruit_feather_rfm95_rp2040.dts

@@ -65,7 +65,7 @@
 		gpio-map-mask = <0xffffffff 0xffffffc0>;
 		gpio-map-pass-thru = <0 0x3f>;
 		gpio-map = <0 0 &gpio0 3 0>, /* SCL */
-			<1 0 &gpio0 2 0>; /* SDA */
+			   <1 0 &gpio0 2 0>; /* SDA */
 	};
 };
 
@@ -125,11 +125,11 @@ zephyr_i2c: &i2c1 {
 		compatible = "semtech,sx1276";
 		reset-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		dio-gpios = <&gpio0 21 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO0 */
-			<&gpio0 22 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO1 */
-			<&gpio0 23 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO2 */
-			<&gpio0 19 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO3 */
-			<&gpio0 20 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO4 */
-			<&gpio0 18 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>; /* SX1276 DIO5 */
+			    <&gpio0 22 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO1 */
+			    <&gpio0 23 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO2 */
+			    <&gpio0 19 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO3 */
+			    <&gpio0 20 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>, /* SX1276 DIO4 */
+			    <&gpio0 18 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>; /* SX1276 DIO5 */
 		spi-max-frequency = <10000000>;
 		power-amplifier-output = "pa-boost";
 	};
@@ -198,8 +198,8 @@ zephyr_i2c: &i2c1 {
 			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 			chain-length = <1>;
 			color-mapping = <LED_COLOR_ID_GREEN
-				LED_COLOR_ID_RED
-				LED_COLOR_ID_BLUE>;
+					 LED_COLOR_ID_RED
+					 LED_COLOR_ID_BLUE>;
 			reset-delay = <280>;
 			frequency = <800000>;
 		};

boards/adafruit/metro_rp2040/adafruit_metro_rp2040.dts

@@ -54,7 +54,7 @@
 		gpio-map-mask = <0xffffffff 0xffffffc0>;
 		gpio-map-pass-thru = <0 0x3f>;
 		gpio-map = <0 0 &gpio0 17 0>, /* SCL */
-			<1 0 &gpio0 16 0>; /* SDA */
+			   <1 0 &gpio0 16 0>; /* SDA */
 	};
 };
 
@@ -186,8 +186,8 @@ zephyr_i2c: &i2c0 {
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 			chain-length = <1>;
 			color-mapping = <LED_COLOR_ID_GREEN
-				LED_COLOR_ID_RED
-				LED_COLOR_ID_BLUE>;
+					 LED_COLOR_ID_RED
+					 LED_COLOR_ID_BLUE>;
 			reset-delay = <280>;
 			frequency = <800000>;
 		};