soc: arm: atmel: Introduce SAMC21x

boards/arm/atsamc21n_xpro/Kconfig.board

@@ -0,0 +1,8 @@
+# SAM C21N Xplained Pro Board configuration
+
+# Copyright (c) 2022 Kamil Serwus
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_ATSAMC21N_XPRO
+	bool "SAM C21N Xplained Pro"
+	depends on SOC_PART_NUMBER_SAMC21N18A

boards/arm/atsamc21n_xpro/Kconfig.defconfig

@@ -0,0 +1,8 @@
+# SAM C21N Xplained Pro board configuration
+
+# Copyright (c) 2022 Kamil Serwus
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD
+	default "atsamc21n_xpro"
+	depends on BOARD_ATSAMC21N_XPRO

boards/arm/atsamc21n_xpro/atsamc21n_xpro-pinctrl.dtsi

@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2022 Kamil Serwus
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <dt-bindings/pinctrl/samc21n-pinctrl.h>
+
+&pinctrl {
+
+	pwm_default: pwm_default {
+		group1 {
+			pinmux = <PC5F_TCC2_WO1>;
+		};
+	};
+
+	adc0_default: adc0_default {
+		group1 {
+			pinmux = <PB9B_ADC0_AIN3>;
+		};
+	};
+
+	adc1_default: adc1_default {
+		group1 {
+			pinmux = <PA8B_ADC1_AIN10>;
+		};
+	};
+
+	sercom0_uart_default: sercom0_uart_default {
+		group1 {
+			pinmux = <PB25C_SERCOM0_PAD1>,
+				 <PB24C_SERCOM0_PAD0>;
+		};
+	};
+
+	sercom1_i2c_default: sercom1_i2c_default {
+		group1 {
+			pinmux = <PA16C_SERCOM1_PAD0>,
+				 <PA17C_SERCOM1_PAD1>;
+		};
+	};
+
+	sercom2_uart_default: sercom1_uart_default {
+		group1 {
+			pinmux = <PA13C_SERCOM2_PAD1>,
+				 <PA12C_SERCOM2_PAD0>;
+		};
+	};
+
+	sercom4_uart_default: sercom4_uart_default {
+		group1 {
+			pinmux = <PB11D_SERCOM4_PAD3>,
+				 <PB10D_SERCOM4_PAD2>;
+		};
+	};
+
+	sercom5_spi_default: sercom5_spi_default {
+		group1 {
+			pinmux = <PB0D_SERCOM5_PAD2>,
+				 <PB2D_SERCOM5_PAD0>,
+				 <PB1D_SERCOM5_PAD3>;
+		};
+	};
+
+};

boards/arm/atsamc21n_xpro/atsamc21n_xpro.dts

@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2022 Kamil Serwus
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <atmel/samc21x18.dtsi>
+#include "atsamc21n_xpro-pinctrl.dtsi"
+
+/ {
+	model = "SAM C21N Xplained Pro";
+	compatible = "atsamc21n,xpro", "atmel,samc21n18a", "atmel,samc21";
+
+	chosen {
+		zephyr,console = &sercom4;
+		zephyr,shell-uart = &sercom4;
+		zephyr,sram = &sram0;
+		zephyr,flash = &flash0;
+	};
+
+	/* These aliases are provided for compatibility with samples */
+	aliases {
+		led0 = &led0;
+		pwm-led0 = &pwm_led0;
+		sw0 = &user_button;
+		i2c-0 = &sercom1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0: led_0 {
+			gpios = <&portc 05 GPIO_ACTIVE_LOW>;
+			label = "Yellow LED";
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		pwm_led0: pwm_led_0 {
+			pwms = <&tcc2 1 PWM_MSEC(20)>;
+		};
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+		user_button: button_0 {
+			gpios = <&portb 19 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
+			label = "User Button";
+		};
+	};
+
+};
+
+&cpu0 {
+	clock-frequency = <48000000>;
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&adc0_default>;
+	pinctrl-names = "default";
+};
+
+&adc1 {
+	pinctrl-0 = <&adc1_default>;
+	pinctrl-names = "default";
+};
+
+&tcc2 {
+	status = "okay";
+	compatible = "atmel,sam0-tcc-pwm";
+	prescaler = <256>;
+	#pwm-cells = <2>;
+
+	pinctrl-0 = <&pwm_default>;
+	pinctrl-names = "default";
+};
+
+&sercom0 {
+	status = "okay";
+	compatible = "atmel,sam0-uart";
+	current-speed = <9600>;
+	rxpo = <1>;
+	txpo = <0>;
+
+	pinctrl-0 = <&sercom0_uart_default>;
+	pinctrl-names = "default";
+};
+
+&sercom1 {
+	status = "okay";
+	compatible = "atmel,sam0-i2c";
+	clock-frequency = <I2C_BITRATE_FAST>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sercom1_i2c_default>;
+	pinctrl-names = "default";
+};
+
+&sercom2 {
+	status = "okay";
+	compatible = "atmel,sam0-uart";
+	current-speed = <115200>;
+	rxpo = <1>;
+	txpo = <0>;
+
+	pinctrl-0 = <&sercom2_uart_default>;
+	pinctrl-names = "default";
+};
+
+&sercom4 {
+	status = "okay";
+	compatible = "atmel,sam0-uart";
+	current-speed = <115200>;
+	rxpo = <3>;
+	txpo = <1>;
+
+	pinctrl-0 = <&sercom4_uart_default>;
+	pinctrl-names = "default";
+};
+
+&sercom5 {
+	status = "okay";
+	compatible = "atmel,sam0-spi";
+	dipo = <0>;
+	dopo = <2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sercom5_spi_default>;
+	pinctrl-names = "default";
+};
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * The final 16 KiB is reserved for the application.
+		 * Storage partition will be used by FCB/LittleFS/NVS
+		 * if enabled.
+		 */
+		storage_partition: partition@3c000 {
+			label = "storage";
+			reg = <0x0003c000 0x00004000>;
+		};
+	};
+};

boards/arm/atsamc21n_xpro/atsamc21n_xpro.yaml

@@ -0,0 +1,18 @@
+# Copyright (c) 2022 Kamil Serwus
+# SPDX-License-Identifier: Apache-2.0
+identifier: atsamc21n_xpro
+name: SAM C21N Xplained Pro
+type: mcu
+arch: arm
+ram: 32
+flash: 256
+toolchain:
+  - zephyr
+  - gnuarmemb
+  - xtools
+supported:
+  - adc
+  - gpio
+  - i2c
+  - pwm
+  - spi

boards/arm/atsamc21n_xpro/atsamc21n_xpro_defconfig

@@ -0,0 +1,11 @@
+# Copyright (c) 2022 Kamil Serwus
+# SPDX-License-Identifier: Apache-2.0
+CONFIG_SOC_SERIES_SAMC21=y
+CONFIG_SOC_PART_NUMBER_SAMC21N18A=y
+CONFIG_BOARD_ATSAMC21N_XPRO=y
+CONFIG_BUILD_OUTPUT_HEX=y
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+CONFIG_SERIAL=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_GPIO=y

boards/arm/atsamc21n_xpro/board.cmake

@@ -0,0 +1,4 @@
+# Copyright (c) 2022 Kamil Serwus
+# SPDX-License-Identifier: Apache-2.0
+
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)