Bluetooth: Controller: Assorted combination of pull requests

samples/bluetooth/bap_broadcast_source/Kconfig

@@ -29,6 +29,11 @@ config ENABLE_LC3
 	select LIBLC3
 	select FPU
 
+config BT_ISO_PACKING_INTERLEAVED
+	bool "Use interleaved packing"
+	help
+	  Use interleaved packing between BIS ISO stream subevents.
+
 config USE_USB_AUDIO_INPUT
 	bool "Use USB Audio as input"
 	# By default, use the USB Audio path is disabled.

samples/bluetooth/bap_broadcast_source/overlay-bt_ll_sw_split.conf

@@ -6,6 +6,8 @@ CONFIG_BT_CTLR_ADV_DATA_LEN_MAX=191
 
 # Enable support for Broadcast ISO in Zephyr Bluetooth Controller
 CONFIG_BT_CTLR_ADV_ISO=y
+CONFIG_BT_CTLR_ADV_ISO_SEQUENTIAL=y
+CONFIG_BT_CTLR_ADV_ISO_INTERLEAVED=y
 
 # Sufficient ISO PDU length for any BAP LC3 presets (155)
 CONFIG_BT_CTLR_ADV_ISO_PDU_LEN_MAX=155

samples/bluetooth/bap_broadcast_source/overlay-interleaved.conf

@@ -0,0 +1 @@
+CONFIG_BT_ISO_PACKING_INTERLEAVED=y

samples/bluetooth/bap_broadcast_source/overlay-sequential.conf

@@ -0,0 +1 @@
+CONFIG_BT_ISO_PACKING_INTERLEAVED=n

samples/bluetooth/bap_broadcast_source/prj.conf

@@ -10,6 +10,9 @@ CONFIG_BT_BAP_BROADCAST_SRC_STREAM_COUNT=2
 # Two streams in one subgroup (stereo)
 CONFIG_BT_BAP_BROADCAST_SRC_SUBGROUP_COUNT=1
 
+# Uncomment below to use Broadcast ISO interleaved packing
+# CONFIG_BT_ISO_PACKING_INTERLEAVED=y
+
 CONFIG_BT_ISO_TX_BUF_COUNT=6
 CONFIG_BT_ISO_TX_MTU=60
 

samples/bluetooth/bap_broadcast_source/src/main.c

@@ -418,8 +418,10 @@
 	create_param.params = subgroup_param;
 	create_param.qos = &preset_active.qos;
 	create_param.encryption = strlen(CONFIG_BROADCAST_CODE) > 0;
-	create_param.packing = BT_ISO_PACKING_SEQUENTIAL;
+	create_param.packing = (IS_ENABLED(CONFIG_BT_ISO_PACKING_INTERLEAVED) ?
+				BT_ISO_PACKING_INTERLEAVED :
+				BT_ISO_PACKING_SEQUENTIAL);
 
 	if (create_param.encryption) {
 		memcpy(create_param.broadcast_code, CONFIG_BROADCAST_CODE,
 		       strlen(CONFIG_BROADCAST_CODE));

samples/bluetooth/hci_ipc/nrf5340_cpunet_bis-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y
@@ -40,7 +40,11 @@ CONFIG_BT_ISO_PERIPHERAL=n
 
 # ISO Streams
 CONFIG_BT_ISO_MAX_CHAN=4
-CONFIG_BT_ISO_TX_BUF_COUNT=1
+# In theory, CONFIG_BT_ISO_TX_BUF_COUNT=1, should be sufficient but this count
+# is used in the context of IPC which falls into a "Newton's Cradle" effect
+# where probably (CONFIG_BT_CTLR_ISO_TX_BUFFERS - CONFIG_BT_ISO_TX_BUF_COUNT)
+# buffers get throttled. Hence, always have the value equal or greater.
+CONFIG_BT_ISO_TX_BUF_COUNT=12
 CONFIG_BT_ISO_RX_BUF_COUNT=1
 
 # Controller
@@ -72,6 +76,7 @@ CONFIG_BT_CTLR_ADV_DATA_BUF_MAX=6
 CONFIG_BT_CTLR_SCAN_AUX_SET=1
 
 CONFIG_BT_CTLR_ADV_RESERVE_MAX=n
+CONFIG_BT_CTLR_ADV_AUX_SLOT_WINDOW=y
 CONFIG_BT_CTLR_SCAN_UNRESERVED=y
 CONFIG_BT_TICKER_NEXT_SLOT_GET_MATCH=y
 

samples/bluetooth/hci_ipc/nrf5340_cpunet_bt_mesh-bt_ll_sw_split.conf

@@ -1,7 +1,7 @@
 CONFIG_IPC_SERVICE=y
 CONFIG_MBOX=y
 
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512

samples/bluetooth/hci_ipc/nrf5340_cpunet_cis-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y
@@ -39,7 +39,11 @@ CONFIG_BT_ISO_PERIPHERAL=y
 
 # ISO Streams
 CONFIG_BT_ISO_MAX_CHAN=4
-CONFIG_BT_ISO_TX_BUF_COUNT=1
+# In theory, CONFIG_BT_ISO_TX_BUF_COUNT=1, should be sufficient but this count
+# is used in the context of IPC which falls into a "Newton's Cradle" effect
+# where probably (CONFIG_BT_CTLR_ISO_TX_BUFFERS - CONFIG_BT_ISO_TX_BUF_COUNT)
+# buffers get throttled. Hence, always have the value equal or greater.
+CONFIG_BT_ISO_TX_BUF_COUNT=12
 CONFIG_BT_ISO_RX_BUF_COUNT=1
 
 # Controller
@@ -82,8 +86,8 @@ CONFIG_BT_CTLR_LLCP_LOCAL_PROC_CTX_BUF_NUM=6
 # ISO Connection Oriented
 CONFIG_BT_CTLR_CENTRAL_ISO=y
 CONFIG_BT_CTLR_PERIPHERAL_ISO=y
-CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_GROUPS=1
+CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_STREAMS_PER_GROUP=2
 CONFIG_BT_CTLR_CONN_ISO_SDU_LEN_MAX=247
 CONFIG_BT_CTLR_CONN_ISO_PDU_LEN_MAX=251

samples/bluetooth/hci_ipc/nrf5340_cpunet_df-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y

samples/bluetooth/hci_ipc/nrf5340_cpunet_iso-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 CONFIG_CBPRINTF_REDUCED_INTEGRAL=y
 
 CONFIG_ISR_TABLES_LOCAL_DECLARATION=y
@@ -46,7 +46,11 @@ CONFIG_BT_ISO_PERIPHERAL=y
 CONFIG_BT_ISO_TX_MTU=310
 CONFIG_BT_ISO_RX_MTU=310
 CONFIG_BT_ISO_MAX_CHAN=4
-CONFIG_BT_ISO_TX_BUF_COUNT=1
+# In theory, CONFIG_BT_ISO_TX_BUF_COUNT=1, should be sufficient but this count
+# is used in the context of IPC which falls into a "Newton's Cradle" effect
+# where probably (CONFIG_BT_CTLR_ISO_TX_BUFFERS - CONFIG_BT_ISO_TX_BUF_COUNT)
+# buffers get throttled. Hence, always have the value equal or greater.
+CONFIG_BT_ISO_TX_BUF_COUNT=8
 CONFIG_BT_ISO_RX_BUF_COUNT=1
 
 # Controller
@@ -80,6 +84,7 @@ CONFIG_BT_CTLR_SCAN_AUX_SET=1
 # CONFIG_BT_CTLR_SCAN_AUX_CHAIN_COUNT=1
 
 CONFIG_BT_CTLR_ADV_RESERVE_MAX=n
+CONFIG_BT_CTLR_ADV_AUX_SLOT_WINDOW=y
 CONFIG_BT_CTLR_ADV_ISO_RESERVE_MAX=y
 CONFIG_BT_CTLR_SYNC_ISO_RESERVE_MAX=n
 CONFIG_BT_CTLR_CENTRAL_RESERVE_MAX=n
@@ -100,8 +105,10 @@ CONFIG_BT_CTLR_ADV_EXT=y
 CONFIG_BT_CTLR_ADV_PERIODIC=y
 CONFIG_BT_CTLR_SYNC_TRANSFER_SENDER=y
 CONFIG_BT_CTLR_ADV_ISO=y
-CONFIG_BT_CTLR_ADV_ISO_SET=2
-CONFIG_BT_CTLR_ADV_ISO_STREAM_COUNT=4
+CONFIG_BT_CTLR_ADV_ISO_SEQUENTIAL=y
+CONFIG_BT_CTLR_ADV_ISO_INTERLEAVED=y
+CONFIG_BT_CTLR_ADV_ISO_SET=1
+CONFIG_BT_CTLR_ADV_ISO_STREAM_COUNT=2
 CONFIG_BT_CTLR_ADV_ISO_STREAM_MAX=2
 CONFIG_BT_CTLR_ADV_ISO_PDU_LEN_MAX=247
 
@@ -110,6 +117,8 @@ CONFIG_BT_CTLR_ADV_EXT=y
 CONFIG_BT_CTLR_SYNC_PERIODIC=y
 CONFIG_BT_CTLR_SYNC_TRANSFER_RECEIVER=y
 CONFIG_BT_CTLR_SYNC_ISO=y
+CONFIG_BT_CTLR_SYNC_ISO_SEQUENTIAL=y
+CONFIG_BT_CTLR_SYNC_ISO_INTERLEAVED=y
 CONFIG_BT_CTLR_SCAN_SYNC_ISO_SET=1
 CONFIG_BT_CTLR_SYNC_ISO_STREAM_COUNT=2
 CONFIG_BT_CTLR_SYNC_ISO_STREAM_MAX=2
@@ -118,16 +127,16 @@ CONFIG_BT_CTLR_SYNC_ISO_PDU_LEN_MAX=251
 # ISO Connection Oriented
 CONFIG_BT_CTLR_CENTRAL_ISO=y
 CONFIG_BT_CTLR_PERIPHERAL_ISO=y
-CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_GROUPS=1
+CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_STREAMS_PER_GROUP=2
 CONFIG_BT_CTLR_CONN_ISO_SDU_LEN_MAX=247
 CONFIG_BT_CTLR_CONN_ISO_PDU_LEN_MAX=251
 CONFIG_BT_CTLR_CONN_ISO_LOW_LATENCY_POLICY=y
 
 # ISO Transmissions
-CONFIG_BT_CTLR_ISOAL_SOURCES=4
-CONFIG_BT_CTLR_ISO_TX_BUFFERS=12
+CONFIG_BT_CTLR_ISOAL_SOURCES=2
+CONFIG_BT_CTLR_ISO_TX_BUFFERS=8
 CONFIG_BT_CTLR_ISO_TX_BUFFER_SIZE=255
 
 # ISO Receptions

samples/bluetooth/hci_ipc/nrf5340_cpunet_iso_broadcast-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y
@@ -20,11 +20,18 @@ CONFIG_BT_OBSERVER=n
 CONFIG_BT_EXT_ADV=y
 CONFIG_BT_PER_ADV=y
 CONFIG_BT_ISO_BROADCASTER=y
-CONFIG_BT_ISO_MAX_CHAN=4
-CONFIG_BT_ISO_TX_BUF_COUNT=1
 CONFIG_BT_CENTRAL=n
 CONFIG_BT_PERIPHERAL=n
 
+# ISO Streams
+CONFIG_BT_ISO_MAX_CHAN=4
+# In theory, CONFIG_BT_ISO_TX_BUF_COUNT=1, should be sufficient but this count
+# is used in the context of IPC which falls into a "Newton's Cradle" effect
+# where probably (CONFIG_BT_CTLR_ISO_TX_BUFFERS - CONFIG_BT_ISO_TX_BUF_COUNT)
+# buffers get throttled. Hence, always have the value equal or greater.
+CONFIG_BT_ISO_TX_BUF_COUNT=12
+CONFIG_BT_ISO_RX_BUF_COUNT=1
+
 # ISO Broadcast Controller
 CONFIG_BT_LL_SW_SPLIT=y
 CONFIG_BT_CTLR_ADV_PERIODIC=y

samples/bluetooth/hci_ipc/nrf5340_cpunet_iso_central-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y
@@ -35,7 +35,11 @@ CONFIG_BT_ISO_PERIPHERAL=n
 
 # ISO Streams
 CONFIG_BT_ISO_MAX_CHAN=2
-CONFIG_BT_ISO_TX_BUF_COUNT=1
+# In theory, CONFIG_BT_ISO_TX_BUF_COUNT=1, should be sufficient but this count
+# is used in the context of IPC which falls into a "Newton's Cradle" effect
+# where probably (CONFIG_BT_CTLR_ISO_TX_BUFFERS - CONFIG_BT_ISO_TX_BUF_COUNT)
+# buffers get throttled. Hence, always have the value equal or greater.
+CONFIG_BT_ISO_TX_BUF_COUNT=12
 CONFIG_BT_ISO_RX_BUF_COUNT=1
 
 # Controller
@@ -46,8 +50,8 @@ CONFIG_BT_CTLR_SCAN_DATA_LEN_MAX=191
 # ISO Connection Oriented
 CONFIG_BT_CTLR_CENTRAL_ISO=y
 CONFIG_BT_CTLR_PERIPHERAL_ISO=n
-CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_GROUPS=1
+CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_STREAMS_PER_GROUP=2
 CONFIG_BT_CTLR_CONN_ISO_SDU_LEN_MAX=247
 CONFIG_BT_CTLR_CONN_ISO_PDU_LEN_MAX=251

samples/bluetooth/hci_ipc/nrf5340_cpunet_iso_peripheral-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y
@@ -35,7 +35,11 @@ CONFIG_BT_ISO_PERIPHERAL=y
 
 # ISO Streams
 CONFIG_BT_ISO_MAX_CHAN=2
-CONFIG_BT_ISO_TX_BUF_COUNT=1
+# In theory, CONFIG_BT_ISO_TX_BUF_COUNT=1, should be sufficient but this count
+# is used in the context of IPC which falls into a "Newton's Cradle" effect
+# where probably (CONFIG_BT_CTLR_ISO_TX_BUFFERS - CONFIG_BT_ISO_TX_BUF_COUNT)
+# buffers get throttled. Hence, always have the value equal or greater.
+CONFIG_BT_ISO_TX_BUF_COUNT=12
 CONFIG_BT_ISO_RX_BUF_COUNT=1
 
 # Controller
@@ -46,8 +50,8 @@ CONFIG_BT_CTLR_ADV_DATA_LEN_MAX=191
 # ISO Connection Oriented
 CONFIG_BT_CTLR_CENTRAL_ISO=n
 CONFIG_BT_CTLR_PERIPHERAL_ISO=y
-CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_GROUPS=1
+CONFIG_BT_CTLR_CONN_ISO_STREAMS=2
 CONFIG_BT_CTLR_CONN_ISO_STREAMS_PER_GROUP=2
 CONFIG_BT_CTLR_CONN_ISO_SDU_LEN_MAX=247
 CONFIG_BT_CTLR_CONN_ISO_PDU_LEN_MAX=251

samples/bluetooth/hci_ipc/nrf5340_cpunet_iso_receive-bt_ll_sw_split.conf

@@ -5,7 +5,7 @@ CONFIG_ISR_STACK_SIZE=1024
 CONFIG_IDLE_STACK_SIZE=256
 CONFIG_MAIN_STACK_SIZE=512
 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=512
-CONFIG_HEAP_MEM_POOL_SIZE=8192
+CONFIG_HEAP_MEM_POOL_SIZE=7168
 
 CONFIG_BT=y
 CONFIG_BT_HCI_RAW=y

samples/bluetooth/hci_ipc/overlay-nrf5340_cpunet_iso_nrf21540_ek-bt_ll_sw_split.conf

@@ -0,0 +1,6 @@
+# Reduce from 310 bytes, in nrf5340_cpunet_iso-bt_ll_sw_split.conf
+# to be able to fit in 64KB RAM.
+
+# Example:
+# CONFIG_BT_ISO_TX_MTU=247
+# CONFIG_BT_ISO_RX_MTU=251

samples/bluetooth/hci_ipc/sample.yaml

@@ -87,6 +87,7 @@ tests:
     tags: bluetooth
     extra_args:
       - CONF_FILE="nrf5340_cpunet_iso-bt_ll_sw_split.conf"
+      - EXTRA_CONF_FILE="overlay-nrf5340_cpunet_iso_nrf21540_ek-bt_ll_sw_split.conf"
       - DTC_OVERLAY_FILE="./boards/nrf5340_audio_dk_nrf5340_cpunet_nrf21540_ek.overlay"
     platform_allow:
       - nrf5340_audio_dk/nrf5340/cpunet

samples/bluetooth/hci_uart/boards/nrf5340dk_nrf5340_cpuapp.conf

@@ -0,0 +1,16 @@
+# Host and Controller common dependencies
+CONFIG_BT_EXT_ADV=y
+CONFIG_BT_PER_ADV=y
+CONFIG_BT_PER_ADV_SYNC=y
+CONFIG_BT_PER_ADV_SYNC_MAX=2
+
+# Broadcast and Connected ISO
+CONFIG_BT_ISO_BROADCASTER=y
+CONFIG_BT_ISO_SYNC_RECEIVER=y
+CONFIG_BT_ISO_CENTRAL=y
+CONFIG_BT_ISO_PERIPHERAL=y
+
+# ISO Streams
+CONFIG_BT_ISO_MAX_CHAN=4
+CONFIG_BT_ISO_TX_BUF_COUNT=18
+CONFIG_BT_ISO_RX_BUF_COUNT=1

samples/bluetooth/hci_uart/overlay-all-bt_ll_sw_split.conf

@@ -57,6 +57,7 @@ CONFIG_BT_CTLR_SCAN_AUX_SET=1
 # CONFIG_BT_CTLR_SCAN_AUX_CHAIN_COUNT=1
 
 CONFIG_BT_CTLR_ADV_RESERVE_MAX=n
+CONFIG_BT_CTLR_ADV_AUX_SLOT_WINDOW=y
 CONFIG_BT_CTLR_ADV_ISO_RESERVE_MAX=y
 CONFIG_BT_CTLR_SYNC_ISO_RESERVE_MAX=n
 CONFIG_BT_CTLR_CENTRAL_RESERVE_MAX=n
@@ -94,6 +95,8 @@ CONFIG_BT_CTLR_ADV_EXT=y
 CONFIG_BT_CTLR_ADV_PERIODIC=y
 CONFIG_BT_CTLR_SYNC_TRANSFER_SENDER=y
 CONFIG_BT_CTLR_ADV_ISO=y
+CONFIG_BT_CTLR_ADV_ISO_SEQUENTIAL=y
+CONFIG_BT_CTLR_ADV_ISO_INTERLEAVED=y
 CONFIG_BT_CTLR_ADV_ISO_SET=2
 CONFIG_BT_CTLR_ADV_ISO_STREAM_COUNT=4
 CONFIG_BT_CTLR_ADV_ISO_STREAM_MAX=2
@@ -104,6 +107,8 @@ CONFIG_BT_CTLR_ADV_EXT=y
 CONFIG_BT_CTLR_SYNC_PERIODIC=y
 CONFIG_BT_CTLR_SYNC_TRANSFER_RECEIVER=y
 CONFIG_BT_CTLR_SYNC_ISO=y
+CONFIG_BT_CTLR_SYNC_ISO_SEQUENTIAL=y
+CONFIG_BT_CTLR_SYNC_ISO_INTERLEAVED=y
 CONFIG_BT_CTLR_SCAN_SYNC_ISO_SET=1
 CONFIG_BT_CTLR_SYNC_ISO_STREAM_COUNT=2
 CONFIG_BT_CTLR_SYNC_ISO_STREAM_MAX=2

samples/bluetooth/hci_uart_3wire/overlay-all-bt_ll_sw_split.conf

@@ -56,6 +56,7 @@ CONFIG_BT_CTLR_SCAN_AUX_SET=1
 # CONFIG_BT_CTLR_SCAN_AUX_CHAIN_COUNT=1
 
 CONFIG_BT_CTLR_ADV_RESERVE_MAX=n
+CONFIG_BT_CTLR_ADV_AUX_SLOT_WINDOW=y
 CONFIG_BT_CTLR_ADV_ISO_RESERVE_MAX=y
 CONFIG_BT_CTLR_SYNC_ISO_RESERVE_MAX=n
 CONFIG_BT_CTLR_CENTRAL_RESERVE_MAX=n
@@ -93,6 +94,8 @@ CONFIG_BT_CTLR_ADV_EXT=y
 CONFIG_BT_CTLR_ADV_PERIODIC=y
 CONFIG_BT_CTLR_SYNC_TRANSFER_SENDER=y
 CONFIG_BT_CTLR_ADV_ISO=y
+CONFIG_BT_CTLR_ADV_ISO_SEQUENTIAL=y
+CONFIG_BT_CTLR_ADV_ISO_INTERLEAVED=y
 CONFIG_BT_CTLR_ADV_ISO_SET=2
 CONFIG_BT_CTLR_ADV_ISO_STREAM_COUNT=4
 CONFIG_BT_CTLR_ADV_ISO_STREAM_MAX=2
@@ -103,6 +106,8 @@ CONFIG_BT_CTLR_ADV_EXT=y
 CONFIG_BT_CTLR_SYNC_PERIODIC=y
 CONFIG_BT_CTLR_SYNC_TRANSFER_RECEIVER=y
 CONFIG_BT_CTLR_SYNC_ISO=y
+CONFIG_BT_CTLR_SYNC_ISO_SEQUENTIAL=y
+CONFIG_BT_CTLR_SYNC_ISO_INTERLEAVED=y
 CONFIG_BT_CTLR_SCAN_SYNC_ISO_SET=1
 CONFIG_BT_CTLR_SYNC_ISO_STREAM_COUNT=2
 CONFIG_BT_CTLR_SYNC_ISO_STREAM_MAX=2