Boards: Shields: Add Adafruit LIS3DH accelerometer shield

boards/shields/adafruit_lis3dh/Kconfig.shield

@@ -0,0 +1,5 @@
+# Copyright (c) 2025 Jonas Berg
+# SPDX-License-Identifier: Apache-2.0
+
+config SHIELD_ADAFRUIT_LIS3DH
+	def_bool $(shields_list_contains,adafruit_lis3dh)

boards/shields/adafruit_lis3dh/adafruit_lis3dh.overlay

@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2025 Jonas Berg
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/ {
+	aliases {
+		accel0 = &adafruit_lis3dh;
+	};
+};
+
+&zephyr_i2c {
+	status = "okay";
+
+	adafruit_lis3dh: lis3dh@18 {
+		compatible = "st,lis3dh", "st,lis2dh";
+		reg = <0x18>;
+	};
+};

boards/shields/adafruit_lis3dh/doc/index.rst

@@ -0,0 +1,71 @@
+.. _adafruit_lis3dh:
+
+Adafruit LIS3DH Shield
+######################
+
+Overview
+********
+
+The `Adafruit LIS3DH Triple-Axis Accelerometer Sensor Shield`_ features
+a `ST LIS3DH 3-axis accelerometer`_ and two STEMMA QT connectors.
+
+.. figure:: adafruit_lis3dh.webp
+   :align: center
+   :alt: Adafruit LIS3DH Shield
+
+   Adafruit LIS3DH Shield (Credit: Adafruit)
+
+
+Requirements
+************
+
+This shield can be used with boards which provide an I2C connector, for
+example STEMMA QT or Qwiic connectors.
+The target board must define a ``zephyr_i2c`` node label.
+See :ref:`shields` for more details.
+
+
+Pin Assignments
+===============
+
++--------------+------------------------------------------------------+
+| Shield Pin   | Function                                             |
++==============+======================================================+
+| SDA          | LIS3DH I2C SDA                                       |
++--------------+------------------------------------------------------+
+| SCL          | LIS3DH I2C SCL                                       |
++--------------+------------------------------------------------------+
+| INT          | LIS3DH Interrupt out                                 |
++--------------+------------------------------------------------------+
+| SDO          | LIS3DH I2C address selection. Pull down by default.  |
++--------------+------------------------------------------------------+
+| CS           | LIS3DH Force I2C mode by setting it to high level.   |
++--------------+------------------------------------------------------+
+| I2           | LIS3DH Second interrupt out                          |
++--------------+------------------------------------------------------+
+| A1-A3        | LIS3DH Analog-to-digital converter inputs. Not used. |
++--------------+------------------------------------------------------+
+
+In order to use interrupts you need to connect a separate wire from the
+shield to a GPIO pin on your microcontroller board. See
+:dtcompatible:`st,lis3dh` for documentation on how to adjust the
+devicetree file.
+
+
+Programming
+***********
+
+Set ``--shield adafruit_lis3dh`` when you invoke ``west build``. For example
+when running the :zephyr:code-sample:`accel_polling` sample:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/sensor/accel_polling
+   :board: adafruit_qt_py_rp2040
+   :shield: adafruit_lis3dh
+   :goals: build
+
+.. _Adafruit LIS3DH Triple-Axis Accelerometer Sensor Shield:
+   https://learn.adafruit.com/adafruit-lis3dh-triple-axis-accelerometer-breakout
+
+.. _ST LIS3DH 3-axis accelerometer:
+   https://www.st.com/en/mems-and-sensors/lis3dh.html

boards/shields/adafruit_lis3dh/shield.yml

@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: Apache-2.0
+#
+# Copyright (c) 2025, Jonas Berg
+
+shield:
+  name: adafruit_lis3dh
+  full_name: Adafruit LIS3DH Triple-Axis Accelerometer Sensor Shield
+  vendor: adafruit
+  supported_features:
+    - sensor