dts/board format property node order

boards/01space/esp32c3_042_oled/esp32c3_042_oled.dts

@@ -35,17 +35,17 @@
 
 /* Have to use uart1 as some tests are hardcoded for that DTS node :/ */
 &uart1 {
-	status = "okay";
 	current-speed = <115200>;
 	pinctrl-0 = <&uart1_default>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &i2c0 {
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_STANDARD>;
 	pinctrl-0 = <&i2c0_default>;
 	pinctrl-names = "default";
+	status = "okay";
 
 	eastrising_72x40: ssd1306@3c {
 		compatible = "solomon,ssd1306fb";
@@ -69,9 +69,9 @@
 &spi2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	status = "okay";
 	pinctrl-0 = <&spim2_default>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &usb_serial {

boards/96boards/aerocore2/96b_aerocore2.dts

@@ -10,8 +10,8 @@
 #include <st/f4/stm32f427v(g-i)tx-pinctrl.dtsi>
 
 / {
-	model = "96Boards Gumstix AeroCore 2";
 	compatible = "gumstix,aerocore2";
+	model = "96Boards Gumstix AeroCore 2";
 
 	chosen {
 		zephyr,console = &uart7;
@@ -146,8 +146,8 @@
 &i2c2 {
 	pinctrl-0 = <&i2c2_scl_pb10 &i2c2_sda_pb11>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 };
 
 zephyr_udc0: &usbotg_fs {
@@ -160,25 +160,25 @@ zephyr_udc0: &usbotg_fs {
 	status = "okay";
 
 	pwm4: pwm {
-		status = "okay";
 		pinctrl-0 = <&tim4_ch1_pd12
 			     &tim4_ch2_pd13
 			     &tim4_ch3_pd14
 			     &tim4_ch4_pd15>;
 		pinctrl-names = "default";
+		status = "okay";
 	};
 };
 
 &timers5 {
 	status = "okay";
 
 	pwm5: pwm {
-		status = "okay";
 		pinctrl-0 = <&tim5_ch1_pa0
 			     &tim5_ch2_pa1
 			     &tim5_ch3_pa2
 			     &tim5_ch4_pa3>;
 		pinctrl-names = "default";
+		status = "okay";
 	};
 };
 

boards/96boards/argonkey/96b_argonkey.dts

@@ -10,8 +10,8 @@
 #include <zephyr/dt-bindings/input/input-event-codes.h>
 
 / {
-	model = "Tocoding Argonkey 96boards";
 	compatible = "tocoding,argonkey";
+	model = "Tocoding Argonkey 96boards";
 
 	chosen {
 		zephyr,console = &usart1;
@@ -130,9 +130,9 @@
 };
 
 &i2s5 {
-	status = "okay";
 	pinctrl-0 = <&i2s5_ck_pb0 &i2s5_sd_pb8>;
 	pinctrl-names = "default";
+	status = "okay";
 
 	mp34dt05@0 {
 		compatible = "st,mpxxdtyy";
@@ -143,15 +143,15 @@
 &i2c1 {
 	pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-0 = <&i2c2_scl_pb10 &i2c2_sda_pb9>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 
 	hts221@5f {
 		compatible = "st,hts221";
@@ -173,8 +173,8 @@
 &i2c3 {
 	pinctrl-0 = <&i2c3_scl_pa8 &i2c3_sda_pb4>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 
 	lp3943@60 {
 		compatible = "ti,lp3943";

boards/96boards/avenger96/96b_avenger96.dts

@@ -9,8 +9,8 @@
 #include <st/mp1/stm32mp157aacx-pinctrl.dtsi>
 
 / {
-	model = "Arrow Electronics STM32MP157A Avenger96 board";
 	compatible = "arrow,stm32mp157a-avenger96";
+	model = "Arrow Electronics STM32MP157A Avenger96 board";
 
 	chosen {
 		/*

boards/96boards/carbon/96b_carbon_nrf51822.dts

@@ -9,8 +9,8 @@
 #include "96b_carbon_nrf51822-pinctrl.dtsi"
 
 / {
-	model = "Seeed Studio Carbon nRF51 96board";
 	compatible = "seeed,carbon_nrf51";
+	model = "Seeed Studio Carbon nRF51 96board";
 
 	chosen {
 		zephyr,console = &uart0;
@@ -34,27 +34,27 @@
 };
 
 &i2c0 {
-	status = "okay";
 	pinctrl-0 = <&i2c0_default>;
 	pinctrl-1 = <&i2c0_sleep>;
 	pinctrl-names = "default", "sleep";
+	status = "okay";
 };
 
 &uart0 {
 	current-speed = <115200>;
-	status = "okay";
 	pinctrl-0 = <&uart0_default>;
 	pinctrl-1 = <&uart0_sleep>;
 	pinctrl-names = "default", "sleep";
+	status = "okay";
 };
 
 &spi1 {
 	compatible = "nordic,nrf-spis";
-	status = "okay";
 	def-char = <0x00>;
 
 	pinctrl-0 = <&spi1_default>;
 	pinctrl-names = "default";
+	status = "okay";
 
 	bt-hci@0 {
 		compatible = "zephyr,bt-hci-spi-slave";

boards/96boards/carbon/96b_carbon_stm32f401xe.dts

@@ -11,8 +11,8 @@
 #include <zephyr/dt-bindings/input/input-event-codes.h>
 
 / {
-	model = "Seeed Studio Carbon 96boards";
 	compatible = "seeed,carbon";
+	model = "Seeed Studio Carbon 96boards";
 
 	chosen {
 		zephyr,console = &usart1;
@@ -110,23 +110,22 @@
 &i2c1 {
 	pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-0 = <&i2c2_scl_pb10 &i2c2_sda_pb3>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 };
 
 &spi1 {
-	status = "okay";
-
 	pinctrl-0 = <&spi1_miso_pa6 &spi1_mosi_pa7
 		     &spi1_sck_pa5 &spi1_nss_pa4>;
 	pinctrl-names = "default";
+	status = "okay";
 
 	/* Nordic nRF51822-QFAC */
 	hci_spi: bt-hci@0 {
@@ -158,8 +157,8 @@ zephyr_udc0: &usbotg_fs {
 		#size-cells = <1>;
 
 		boot_partition: partition@0 {
-			label = "mcuboot";
 			reg = <0x00000000 DT_SIZE_K(32)>;
+			label = "mcuboot";
 			read-only;
 		};
 
@@ -170,18 +169,18 @@ zephyr_udc0: &usbotg_fs {
 		 */
 
 		slot0_partition: partition@20000 {
-			label = "image-0";
 			reg = <0x00020000 DT_SIZE_K(128)>;
+			label = "image-0";
 		};
 
 		slot1_partition: partition@40000 {
-			label = "image-1";
 			reg = <0x00040000 DT_SIZE_K(128)>;
+			label = "image-1";
 		};
 
 		scratch_partition: partition@60000 {
-			label = "image-scratch";
 			reg = <0x00060000 DT_SIZE_K(128)>;
+			label = "image-scratch";
 		};
 	};
 };

boards/96boards/meerkat96/96b_meerkat96_mcimx7d_m4.dts

@@ -9,8 +9,8 @@
 #include "96b_meerkat96-pinctrl.dtsi"
 
 / {
-	model = "Meerkat96 Board";
 	compatible = "novtech,imx7d-meerkat96";
+	model = "Meerkat96 Board";
 
 	chosen {
 		zephyr,flash = &tcml_code;
@@ -52,11 +52,11 @@
 };
 
 &uart1 {
-	status = "okay";
 	current-speed = <115200>;
 	modem-mode = <0>;
 	pinctrl-0 = <&uart1_default>;
 	pinctrl-names = "default";
+	status = "okay";
 };
 
 &gpio1 {

boards/96boards/neonkey/96b_neonkey.dts

@@ -10,8 +10,8 @@
 #include <zephyr/dt-bindings/input/input-event-codes.h>
 
 / {
-	model = "Tocoding Neonkey 96boards";
 	compatible = "tocoding,neonkey";
+	model = "Tocoding Neonkey 96boards";
 
 	chosen {
 		zephyr,console = &usart1;
@@ -97,22 +97,22 @@
 &i2c1 {
 	pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-0 = <&i2c2_scl_pb10 &i2c2_sda_pb3>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_FAST>;
+	status = "okay";
 };
 
 &i2c3 {
 	pinctrl-0 = <&i2c3_scl_pa8 &i2c3_sda_pb4>;
 	pinctrl-names = "default";
-	status = "okay";
 	clock-frequency = <I2C_BITRATE_STANDARD>;
+	status = "okay";
 
 	lp3943@60 {
 		compatible = "ti,lp3943";

boards/96boards/nitrogen/96b_nitrogen.dts

@@ -11,8 +11,8 @@
 #include <zephyr/dt-bindings/input/input-event-codes.h>
 
 / {
-	model = "Seeed Studio Nitrogen 96board";
 	compatible = "seeed,nitrogen";
+	model = "Seeed Studio Nitrogen 96board";
 
 	chosen {
 		zephyr,console = &uart0;
@@ -76,26 +76,26 @@
 &uart0 {
 	compatible = "nordic,nrf-uart";
 	current-speed = <115200>;
-	status = "okay";
 	pinctrl-0 = <&uart0_default>;
 	pinctrl-1 = <&uart0_sleep>;
 	pinctrl-names = "default", "sleep";
+	status = "okay";
 };
 
 &i2c0 {
 	compatible = "nordic,nrf-twi";
-	status = "okay";
 	pinctrl-0 = <&i2c0_default>;
 	pinctrl-1 = <&i2c0_sleep>;
 	pinctrl-names = "default", "sleep";
+	status = "okay";
 };
 
 &spi1 {
 	compatible = "nordic,nrf-spi";
-	status = "okay";
 	pinctrl-0 = <&spi1_default>;
 	pinctrl-1 = <&spi1_sleep>;
 	pinctrl-names = "default", "sleep";
+	status = "okay";
 };
 
 &flash0 {
@@ -105,23 +105,23 @@
 		#size-cells = <1>;
 
 		boot_partition: partition@0 {
-			label = "mcuboot";
 			reg = <0x00000000 0xa000>;
+			label = "mcuboot";
 		};
 
 		slot0_partition: partition@a000 {
-			label = "image-0";
 			reg = <0x0000a000 0x33000>;
+			label = "image-0";
 		};
 
 		slot1_partition: partition@3d000 {
-			label = "image-1";
 			reg = <0x0003d000 0x33000>;
+			label = "image-1";
 		};
 
 		scratch_partition: partition@70000 {
-			label = "image-scratch";
 			reg = <0x00070000 0xa000>;
+			label = "image-scratch";
 		};
 
 		/*
@@ -131,8 +131,8 @@
 		 * will be created in this area.
 		 */
 		storage_partition: partition@7a000 {
-			label = "storage";
 			reg = <0x0007a000 0x00006000>;
+			label = "storage";
 		};
 	};
 };