Add Avatto thermostats (Tuya)

tests/test_tuya_thermostat.py

@@ -6,50 +6,84 @@
 
 from tests.common import ClusterListener
 import zhaquirks
+from zhaquirks.tuya import TUYA_MCU_VERSION_RSP
 from zhaquirks.tuya.mcu import TuyaMCUCluster
 
 zhaquirks.setup()
 
+ZCL_TUYA_VERSION_RSP = b"\x09\x06\x11\x01\x6d\x82"
+ZCL_TUYA_SET_TIME = b"\x09\x12\x24\x0d\x00"
+
 
 @pytest.mark.parametrize(
-    "msg,attr,value",
+    "manuf,msg,attr,value",
     [
         (
+            "_TZE204_p3lqqy2r",
             b"\t\x13\x02\x00\x06\x01\x01\x00\x01\x01",
             Thermostat.AttributeDefs.system_mode,
             Thermostat.SystemMode.Heat,
         ),  # Set to heat, dp 1
         (
+            "_TZE204_p3lqqy2r",
             b"\t\x16\x02\x00\t\x18\x02\x00\x04\x00\x00\x00\x18",
             Thermostat.AttributeDefs.local_temperature,
             2400,
         ),  # Current temp 24, dp 24
         (
+            "_TZE204_p3lqqy2r",
             b"\t\x15\x02\x00\x08\x10\x02\x00\x04\x00\x00\x00\x19",
             Thermostat.AttributeDefs.occupied_heating_setpoint,
             2500,
         ),  # Setpoint to 25, dp 16
         (
+            "_TZE204_p3lqqy2r",
             b"\t\x17\x02\x00\n\x1c\x02\x00\x04\x00\x00\x00\x00",
             Thermostat.AttributeDefs.local_temperature_calibration,
             0,
         ),  # Local calibration to 0, dp 28
         (
+            "_TZE204_p3lqqy2r",
             b"\t\x1c\x02\x00\x0fh\x01\x00\x01\x01",
             Thermostat.AttributeDefs.running_state,
             Thermostat.RunningState.Heat_State_On,
         ),  # Running state, dp 104
         (
+            "_TZE204_p3lqqy2r",
             b"\t\x1d\x02\x00\x10k\x02\x00\x04\x00\x00\x00\x1b",
             Thermostat.AttributeDefs.max_heat_setpoint_limit,
             2700,
         ),  # Max heat set point, dp 107
+        (
+            "_TZE204_lzriup1j",
+            b"\t\x13\x02\x00\x06\x01\x01\x00\x01\x01",
+            Thermostat.AttributeDefs.system_mode,
+            Thermostat.SystemMode.Heat,
+        ),  # Set to heat, dp 1
+        (
+            "_TZE200_viy9ihs7",
+            b"\t\x13\x02\x00\x06\x01\x01\x00\x01\x01",
+            Thermostat.AttributeDefs.system_mode,
+            Thermostat.SystemMode.Heat,
+        ),  # Set to heat, dp 1
+        (
+            "_TZE204_xnbkhhdr",
+            b"\t\x13\x02\x00\x06\x01\x01\x00\x01\x01",
+            Thermostat.AttributeDefs.system_mode,
+            Thermostat.SystemMode.Heat,
+        ),  # Set to heat, dp 1
+        (
+            "_TZE284_xnbkhhdr",
+            b"\t\x13\x02\x00\x06\x01\x01\x00\x01\x01",
+            Thermostat.AttributeDefs.system_mode,
+            Thermostat.SystemMode.Heat,
+        ),  # Set to heat, dp 1
     ],
 )
-async def test_handle_get_data(zigpy_device_from_v2_quirk, msg, attr, value):
+async def test_handle_get_data(zigpy_device_from_v2_quirk, manuf, msg, attr, value):
     """Test handle_get_data for multiple attributes."""
 
-    quirked = zigpy_device_from_v2_quirk("_TZE204_p3lqqy2r", "TS0601")
+    quirked = zigpy_device_from_v2_quirk(manuf, "TS0601")
     ep = quirked.endpoints[1]
 
     assert ep.tuya_manufacturer is not None
@@ -69,3 +103,21 @@ async def test_handle_get_data(zigpy_device_from_v2_quirk, msg, attr, value):
     assert thermostat_listener.attribute_updates[0][1] == value
 
     assert ep.thermostat.get(attr.id) == value
+
+
+async def test_tuya_no_mcu_version(zigpy_device_from_v2_quirk):
+    """Test lack of TUYA_MCU_VERSION_RSP messages."""
+
+    tuya_device = zigpy_device_from_v2_quirk("_TZE284_xnbkhhdr", "TS0601")
+
+    tuya_cluster = tuya_device.endpoints[1].tuya_manufacturer
+    cluster_listener = ClusterListener(tuya_cluster)
+
+    assert len(cluster_listener.attribute_updates) == 0
+
+    # simulate a TUYA_MCU_VERSION_RSP message
+    hdr, args = tuya_cluster.deserialize(ZCL_TUYA_VERSION_RSP)
+    assert hdr.command_id == TUYA_MCU_VERSION_RSP
+
+    tuya_cluster.handle_message(hdr, args)
+    assert len(cluster_listener.attribute_updates) == 0