chore(deps): Update v24.1 patch (release/v24.1) by renovate[bot] · Pull Request #9493 · dgraph-io/dgraph

renovate · 2025-08-20T04:32:18Z

ℹ️ Note

This PR body was truncated due to platform limits.

This PR contains the following updates:

Package	Type	Update	Change
github.com/golang/geo	require	digest	`6adc566` → `b200a11`
github.com/golang/glog	require	patch	`v1.2.4` → `v1.2.5`
github.com/spf13/pflag	require	patch	`v1.0.6` → `v1.0.10`
github.com/twpayne/go-geom	require	patch	`v1.6.0` → `v1.6.1`
github.com/viterin/vek	require	patch	`v0.4.2` → `v0.4.3`
go.etcd.io/etcd/raft/v3	require	patch	`v3.5.18` → `v3.5.33`
golang.org/x/exp	require	digest	`e0ece0d` → `85c1c22`
google.golang.org/protobuf	require	patch	`v1.36.5` → `v1.36.12`

Release Notes

golang/glog (github.com/golang/glog)

`v1.2.5`

Compare Source

What's Changed

glog: generate a Fatalf-like error message when writing to logsinks fails by @chressie in #76

Full Changelog: golang/glog@v1.2.4...v1.2.5

spf13/pflag (github.com/spf13/pflag)

`v1.0.10`

Compare Source

What's Changed

fix deprecation comment for (FlagSet.)ParseErrorsWhitelist by @thaJeztah in #447
remove uses of errors.Is, which requires go1.13, move go1.16/go1.21 tests to separate file by @thaJeztah in #448

New Contributors

@thaJeztah made their first contribution in #447

Full Changelog: spf13/pflag@v1.0.9...v1.0.10

`v1.0.9`

Compare Source

What's Changed

fix: Restore ParseErrorsWhitelist name for now by @tomasaschan in #446

Full Changelog: spf13/pflag@v1.0.8...v1.0.9

`v1.0.8`

Compare Source

⚠️ Breaking Change

This version, while only a patch bump, includes a (very minor) breaking change: the flag.ParseErrorsWhitelist struct and corresponding FlagSet.parseErrorsWhitelist field have been renamed to ParseErrorsAllowlist.

This should result in compilation errors in any code that uses these fields, which can be fixed by adjusting the names at call sites. There is no change in semantics or behavior of the struct or field referred to by these names. If your code compiles without errors after bumping to/past v1.0.8, you are not affected by this change.

The breaking change was reverted in v1.0.9, by means of re-introducing the old names with deprecation warnings. The plan is still to remove them in a future release, so if your code does depend on the old names, please change them to use the new names at your earliest convenience.

What's Changed

Remove Redundant "Unknown-Flag" Error by @vaguecoder in #364
Switching from whitelist to Allowlist terminology by @dubrie in #261
Omit zero time.Time default from usage line by @mologie in #438
implement CopyToGoFlagSet by @pohly in #330
flag: Emulate stdlib behavior and do not print ErrHelp by @tmc in #407
Print Default Values of String-to-String in Sorted Order by @vaguecoder in #365
fix: Don't print ErrHelp in ParseAll by @tomasaschan in #443
Reset args on re-parse even if empty by @tomasaschan in #444

New Contributors

@vaguecoder made their first contribution in #364
@dubrie made their first contribution in #261
@mologie made their first contribution in #438
@pohly made their first contribution in #330
@tmc made their first contribution in #407
@tomasaschan made their first contribution in #443

Full Changelog: spf13/pflag@v1.0.7...v1.0.8

`v1.0.7`

Compare Source

What's Changed

Fix defaultIsZeroValue check for generic Value types by @MidnightRocket in #422
feat: Use structs for errors returned by pflag. by @eth-p in #425
Fix typos by @co63oc in #428
fix #423 : Add helper function and some documentation to parse shorthand go test flags. by @valdar in #424
add support equivalent to golang flag.TextVar(), also fixes the test failure as described in #368 by @hujun-open in #418
add support for Func() and BoolFunc() #426 by @LeGEC in #429
fix: correct argument length check in FlagSet.Parse by @ShawnJeffersonWang in #409
fix usage message for func flags, fix arguments order by @LeGEC in #431
Add support for time.Time flags by @max-frank in #348

New Contributors

@MidnightRocket made their first contribution in #422
@eth-p made their first contribution in #425
@co63oc made their first contribution in #428
@valdar made their first contribution in #424
@hujun-open made their first contribution in #418
@LeGEC made their first contribution in #429
@ShawnJeffersonWang made their first contribution in #409
@max-frank made their first contribution in #348

Full Changelog: spf13/pflag@v1.0.6...v1.0.7

twpayne/go-geom (github.com/twpayne/go-geom)

`v1.6.1`

Compare Source

viterin/vek (github.com/viterin/vek)

`v0.4.3`: Fix Any() on large false slices

Compare Source

Fixed an issue where Any() would incorrectly return true on large boolean slices with only false values.

etcd-io/etcd (go.etcd.io/etcd/raft/v3)

`v3.5.33`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.33

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.33

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.33

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.32`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.32

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.32

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.32

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.31`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.31

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.31

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.31

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.30`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.30

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.30

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.30

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.29`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.29

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.29

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.29

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.28`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.28

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.28

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.28

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.27`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.27

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.27

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.27

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.26`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.26

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.26

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.26

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.25`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.25

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.25

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.25

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.24`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.24

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.24

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.24

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.23`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.23

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.23

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses gcr.io/etcd-development/etcd as a primary container registry, and quay.io/coreos/etcd as secondary.

ETCD_VER=v3.5.23

rm -rf /tmp/etcd-data.tmp && mkdir -p /tmp/etcd-data.tmp && \
  docker rmi gcr.io/etcd-development/etcd:${ETCD_VER} || true && \
  docker run \
  -p 2379:2379 \
  -p 2380:2380 \
  --mount type=bind,source=/tmp/etcd-data.tmp,destination=/etcd-data \
  --name etcd-gcr-${ETCD_VER} \
  gcr.io/etcd-development/etcd:${ETCD_VER} \
  /usr/local/bin/etcd \
  --name s1 \
  --data-dir /etcd-data \
  --listen-client-urls http://0.0.0.0:2379 \
  --advertise-client-urls http://0.0.0.0:2379 \
  --listen-peer-urls http://0.0.0.0:2380 \
  --initial-advertise-peer-urls http://0.0.0.0:2380 \
  --initial-cluster s1=http://0.0.0.0:2380 \
  --initial-cluster-token tkn \
  --initial-cluster-state new \
  --log-level info \
  --logger zap \
  --log-outputs stderr

docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcd --version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdutl version
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl endpoint health
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl put foo bar
docker exec etcd-gcr-${ETCD_VER} /usr/local/bin/etcdctl get foo

`v3.5.22`

Compare Source

Please check out CHANGELOG for a full list of changes. And make sure to read upgrade guide before upgrading etcd (there may be breaking changes).

For installation guides, please check out play.etcd.io and operating etcd. Latest support status for common architectures and operating systems can be found at supported platforms.

Linux

ETCD_VER=v3.5.22

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test --strip-components=1 --no-same-owner
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

# start a local etcd server
/tmp/etcd-download-test/etcd

# write,read to etcd
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 put foo bar
/tmp/etcd-download-test/etcdctl --endpoints=localhost:2379 get foo

macOS (Darwin)

ETCD_VER=v3.5.22

# choose either URL
GOOGLE_URL=https://storage.googleapis.com/etcd
GITHUB_URL=https://github.com/etcd-io/etcd/releases/download
DOWNLOAD_URL=${GOOGLE_URL}

rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-darwin-amd64.zip -o /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
unzip /tmp/etcd-${ETCD_VER}-darwin-amd64.zip -d /tmp && rm -f /tmp/etcd-${ETCD_VER}-darwin-amd64.zip
mv /tmp/etcd-${ETCD_VER}-darwin-amd64/* /tmp/etcd-download-test && rm -rf mv /tmp/etcd-${ETCD_VER}-darwin-amd64

/tmp/etcd-download-test/etcd --version
/tmp/etcd-download-test/etcdctl version
/tmp/etcd-download-test/etcdutl version

Docker

etcd uses [`gcr.io/etcd-dev

❗ Important

✂ PR body was truncated to here.

Configuration

📅 Schedule: (UTC)

Branch creation
- Between 12:00 AM and 03:59 AM, on day 1 of the month (* 0-3 1 * *)
Automerge
- At any time (no schedule defined)

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

👻 Immortal: This PR will be recreated if closed unmerged. Get config help if that's undesired.

If you want to rebase/retry this PR, check this box

This PR was generated by Mend Renovate. View the repository job log.

trunk-io · 2025-08-20T05:41:49Z

_{View Full Report ↗︎ ⋅ Docs}

renovate · 2025-12-22T22:07:37Z

ℹ️ Artifact update notice

File name: go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

9 additional dependencies were updated
The go directive was updated for compatibility reasons

Due to Go's usage of Minimal Version Selection (MVS), these packages have been updated to the minimum version available, so will still abide by minimumReleaseAge=3 days

Details:

Package	Change
`go`	`1.22.12` -> `1.26.0`
`github.com/google/go-cmp`	`v0.6.0` -> `v0.7.0`
`golang.org/x/crypto`	`v0.33.0` -> `v0.57.0`
`golang.org/x/mod`	`v0.22.0` -> `v0.41.0`
`golang.org/x/net`	`v0.35.0` -> `v0.59.0`
`golang.org/x/sync`	`v0.11.0` -> `v0.23.0`
`golang.org/x/sys`	`v0.30.0` -> `v0.48.0`
`golang.org/x/term`	`v0.29.0` -> `v0.46.0`
`golang.org/x/text`	`v0.22.0` -> `v0.42.0`
`golang.org/x/tools`	`v0.29.0` -> `v0.50.0`

coderabbitai · 2026-09-11T22:06:52Z

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

⚙️ Run configuration

Configuration used: defaults

Review profile: CHILL

Plan: Advanced

Run ID: 6a04b204-33e9-4bd1-857e-addf67fe8f1e

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

Use the checkbox below for a quick retry:

🔍 Trigger review

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

_{Comment @coderabbitai help to get the list of available commands.}

renovate Bot requested a review from a team August 20, 2025 04:32

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 5 times, most recently from 0225bce to 676f6d4 Compare August 25, 2025 13:14

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 4 times, most recently from 8f0dacb to 8d09945 Compare September 4, 2025 08:38

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 4 times, most recently from ecdca5f to 4e2814f Compare September 11, 2025 09:26

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 4 times, most recently from 2d29942 to 657dd33 Compare September 16, 2025 21:38

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 2 times, most recently from 45a3696 to 7c2b933 Compare September 22, 2025 20:50

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 5 times, most recently from 2ae35b6 to 66063a8 Compare October 5, 2025 21:56

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 4 times, most recently from abd2065 to 89ffc0e Compare October 11, 2025 05:50

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 4 times, most recently from c9d9789 to 4ac58d0 Compare November 20, 2025 20:25

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 5 times, most recently from 6ff5662 to 221bf30 Compare November 28, 2025 20:27

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 5 times, most recently from 0e8a01d to 15219a8 Compare December 9, 2025 17:10

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 4 times, most recently from aaae39f to a6bbdd7 Compare December 15, 2025 23:00

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 4 times, most recently from b6f6ef6 to 7c7d341 Compare December 22, 2025 22:07

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch 3 times, most recently from 51a6850 to 98c59af Compare December 29, 2025 14:08

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch from 98c59af to 5fa6c90 Compare January 1, 2026 12:39

renovate Bot force-pushed the renovate/release/v24.1-v24.1-patch branch from 5fa6c90 to 8ca2a07 Compare January 12, 2026 18:52

chore(deps): Update v24.1 patch

73b937f

Navigation Menu

Uh oh!

chore(deps): Update v24.1 patch (release/v24.1) - #9493

chore(deps): Update v24.1 patch (release/v24.1)#9493
renovate[bot] wants to merge 1 commit into
release/v24.1from
renovate/release/v24.1-v24.1-patch

renovate Bot commented Aug 20, 2025 •

edited

Loading

Uh oh!

trunk-io Bot commented Aug 20, 2025 •

edited

Loading

Uh oh!

renovate Bot commented Dec 22, 2025 •

edited

Loading

Uh oh!

coderabbitai Bot commented Sep 11, 2026

Review skipped

Uh oh!

Reviewers

Assignees

Labels

Milestone

Development

Uh oh!

0 participants

Uh oh!

Conversation

renovate Bot commented Aug 20, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Release Notes

What's Changed

What's Changed

New Contributors

What's Changed

⚠️ Breaking Change

What's Changed

New Contributors

What's Changed

New Contributors

v0.4.3: Fix Any() on large false slices

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Linux

macOS (Darwin)

Docker

Configuration

Uh oh!

trunk-io Bot commented Aug 20, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

renovate Bot commented Dec 22, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

ℹ️ Artifact update notice

File name: go.mod

Uh oh!

coderabbitai Bot commented Sep 11, 2026

Review skipped

Uh oh!

Reviewers

Assignees

Labels

Milestone

Development

Uh oh!

0 participants

renovate Bot commented Aug 20, 2025 •

edited

Loading

`v0.4.3`: Fix Any() on large false slices

trunk-io Bot commented Aug 20, 2025 •

edited

Loading

renovate Bot commented Dec 22, 2025 •

edited

Loading