🛠️ R4TKN 🔥 Wi-Fi Warfare Toolkit for Flipper Zero + BW16

This firmware turns your Flipper Zero (paired with BW16) into a powerful Wi-Fi testing device.
Includes tools like DEAUTH ALL, Targeted Disruption (Per Station / Client), with upcoming features like Random SSID Spam, Beacon Floods, and Handshake Capture.
Perfect for Wi-Fi experiments, stress testing, and educational network security research.

Check Some Updates ? Join our Telegram

https://t.me/+2b0bppqzackxZTg1

⚠️ Important Note
🔴 It may not function properly on modern 5GHz routers/modems, which are not vulnerable to typical deauth or beacon flood techniques due to band separation and stricter security protocols.

⚠️ License & Disclaimer
This software is provided "as-is" for educational and research use only. The author disclaims all liability for misuse or damage incurred from its use. Always obtain proper authorization before testing any network security tool.

⚠️ Known Issues

❗ Compatibility Notice
"It's not working on the other Flipper Zero BW16 Dev Board from Aliexpress or other store."

Some third-party BW16 dev boards (often sold on AliExpress/other marketplaces) may use different pin mappings, bootloaders, or power/level shifting that breaks flashing or runtime behavior with this firmware.

Acknowledgements

• cypher-5G-deauther - dkyazzentwatwa

• delfyRTL

• flipper-zero-tutorials

• lopaka - sbrin

• ambd_sdk Image Tool

• readme.so

🆕 Update Notice fix: update FAP file to remove App Too Old warning

The latest release includes a compatibility fix for the Flipper Zero app.

If you previously installed an older .fap file, please remove it first before installing the updated version to avoid conflicts or the App Too Old warning.

⚠️ Available Internationally

• This is already have an full working version of this firmware , not this repo
• Buy Here: Elecrow

Features

• ✅ DEAUTH ALL
  Disconnect all nearby Wi-Fi devices from their networks.

• ✨ TARGETED – PER STATION and PER CLIENT
  Choose a specific Access Point (Station) or a connected device (Client) to target.
  → Other devices will NOT be affected.

---

🛠️ Upcoming / TODO Features

• 🚧 RANDOM SSID (In Progress)
  Will flood the air with randomly generated fake Wi-Fi names (SSIDs) to confuse nearby scanners.

• 🚧 BEACON + DEAUTH (In Progress)
  Will send fake beacon frames with deauth packets to simulate chaotic Wi-Fi environments.

• 🚧 NRF24 + 2.4GHZ (NO EXTRA ESP32) (In Progress)
  🔥 BLE JM + WIFI JAM for 2.4 + 5GHZ DEAUTH 🔥

• 🚧 CAPTURE HANDSHAKE (Planned)
  Will enable WPA/WPA2 handshake capturing for research and testing.

• 🔧 MORE SOON
  Additional tools and experimental features coming soon!

🔌 Pin Mapping: RTL8720DN BW16 ↔ Flipper Zero

RTL8720DN BW16	Flipper Zero
5V	(1) 5V
GND	(8) GND
RX1	(13) TX
TX1	(14) RX

📎 Pinout reference credits: gorebrau/delfyRTL

How to Upload Firmware

WEB FLASHER

FLASH HERE

📥 Flashing Instructions (BW16)

⚠️ Important Note

For those who already have an existing firmware installed on their BW16, it is recommended to erase the existing firmware first before flashing a new one. This helps avoid conflicts and ensures a clean installation.

1. Run as Administrator

   • Right-click the R4TKN FLASHER and select Run as administrator.

2. Configure Serial Port

   • Go to the COM Port section.
   • Under COM, select the correct port for your connected BW16.
   • Leave the rest of the settings as default.

3. Put BW16 in Flash Mode & Start Flashing

   • If your BW16 is not already in flash mode, do the following:
     • Hold the BOOT button.
     • While holding BOOT, press and release RESET.
     • Release the BOOT button.
     • The BW16 is now in flash mode.
   • Now click the Run Upload button to flash the firmware.

🛠 Step-by-Step Instructions for Flipper Zero

1. Install and Launch qFlipper

   • Visit the official qFlipper page and download the installer for your OS. https://flippeprzero.one/update
   • Install and then open qFlipper.
   • Connect your Flipper Zero via USB-C to your PC.

2. Open the File Manager

   • In qFlipper, click the “File manager” tab to view the contents of your Flipper’s SD card.

3. Locate or Create the apps Folder

   • Navigate to the apps directory on your SD card.
   • If it doesn’t exist, right-click on the SD root and select “New folder”, then name it apps.

4. Copy the .fap File

   • Drag & drop your .fap file directly into the apps folder via qFlipper, or
   • Right-click → Upload to select and add it manually.

5. Verify on the Flipper

   • On your Flipper device, navigate: Applications → FAP Loader.
   • You should now see and be able to launch your newly added app.

📬 Support / Collaboration

Got questions, ideas, or want to collaborate?
Drop an email at web.r4tkn@gmail.com

Screenshots

PCB

📦 Local Stocks Available! 🇵🇭 Philippines, 🇸🇬 Singapore, 🇲🇾 Malaysia 📦 Stocks Available Internationally via Buy Here: Elecrow