v2 API - Add PWM and Servo Support

examples/Wippersnapper_NoFS/Wippersnapper_NoFS.ino

@@ -1,36 +1,31 @@
-// Adafruit IO WipperSnapper Beta
-//
-//
-// NOTE: This software is a BETA release and in active development.
-// Please report bugs or errors to
-// https://github.com/adafruit/Adafruit_Wippersnapper_Arduino/issues
+// Adafruit IO WipperSnapper
 //
 // This sketch is for devices which lack USB-MSD or LittleFS support such
-// as the Arduino MKR WiFi 1010, Arduino Nano 33 IoT.
+// as the ESP32Dev for Wokwi Simulator
 //
 // Adafruit invests time and resources providing this open source code.
 // Please support Adafruit and open source hardware by purchasing
 // products from Adafruit!
 //
-// Brent Rubell for Adafruit Industries, 2021
+// Brent Rubell for Adafruit Industries, 2025
 //
 // All text above must be included in any redistribution.
 
-#include "Wippersnapper_Networking.h"
-
+#include "ws_adapters.h"
+#define WS_DEBUG // Enable debug output
 /************************ Adafruit IO Config *******************************/
 
 // Visit io.adafruit.com if you need to create an account,
 // or if you need your Adafruit IO key.
 #define IO_USERNAME "YOUR_AIO_USERNAME"
 #define IO_KEY "YOUR_AIO_KEY"
-
+#define IO_URL "io.adafruit.com"
+#define IO_PORT 8883
 /**************************** WiFi Config ***********************************/
 #define WIFI_SSID "YOUR_WIFI_SSID"
 #define WIFI_PASS "YOUR_WIFI_PASSWORD"
 
-#include "Wippersnapper_Networking.h"
-ws_adapter_wifi wipper(IO_USERNAME, IO_KEY, WIFI_SSID, WIFI_PASS);
+ws_adapter_wifi wipper(IO_USERNAME, IO_KEY, WIFI_SSID, WIFI_PASS, IO_URL, IO_PORT);
 
 void setup() {
   // Provisioning must occur prior to serial init.

src/Wippersnapper_V2.cpp

@@ -55,6 +55,8 @@ Wippersnapper_V2::Wippersnapper_V2() {
   WsV2._ds18x20_controller = new DS18X20Controller();
   WsV2._i2c_controller = new I2cController();
   WsV2._pixels_controller = new PixelsController();
+  WsV2._pwm_controller = new PWMController();
+  WsV2._servo_controller = new ServoController();
 };
 
 /**************************************************************************/
@@ -335,99 +337,127 @@ bool cbDecodeBrokerToDevice(pb_istream_t *stream, const pb_field_t *field,
     WS_DEBUG_PRINTLN("-> Checkin Response Message Type");
     WS_DEBUG_PRINT("Handling Checkin Response...");
     if (!handleCheckinResponse(stream)) {
-      WS_DEBUG_PRINTLN("Failure handling Checkin Response!");
       return false;
     }
     WS_DEBUG_PRINTLN("Handled!");
     break;
   case wippersnapper_signal_BrokerToDevice_digitalio_add_tag:
     WS_DEBUG_PRINTLN("-> DigitalIO Add Message Type");
     if (!WsV2.digital_io_controller->Handle_DigitalIO_Add(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to add digitalio pin!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_digitalio_remove_tag:
     WS_DEBUG_PRINTLN("-> DigitalIO Remove Message Type");
     if (!WsV2.digital_io_controller->Handle_DigitalIO_Remove(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to remove digitalio pin!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_digitalio_write_tag:
     WS_DEBUG_PRINTLN("-> DigitalIO Write Message Type");
     if (!WsV2.digital_io_controller->Handle_DigitalIO_Write(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to write to digitalio pin!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_analogio_add_tag:
     WS_DEBUG_PRINTLN("-> AnalogIO Add Message Type");
     if (!WsV2.analogio_controller->Handle_AnalogIOAdd(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to add analogio pin!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_analogio_remove_tag:
     WS_DEBUG_PRINTLN("-> AnalogIO Remove Message Type");
     if (!WsV2.analogio_controller->Handle_AnalogIORemove(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to remove analogio pin!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_ds18x20_add_tag:
     WS_DEBUG_PRINTLN("-> DS18X20 Add Message Type");
     if (!WsV2._ds18x20_controller->Handle_Ds18x20Add(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to add DS18X20 sensor!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_ds18x20_remove_tag:
     WS_DEBUG_PRINTLN("-> DS18X20 Remove Message Type");
     if (!WsV2._ds18x20_controller->Handle_Ds18x20Remove(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to remove DS18X20 sensor!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_i2c_device_add_replace_tag:
     WS_DEBUG_PRINTLN("-> I2C Device Add/Replace Message Type");
     if (!WsV2._i2c_controller->Handle_I2cDeviceAddOrReplace(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to add/replace I2C device!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_i2c_bus_scan_tag:
     WS_DEBUG_PRINTLN("-> I2C Bus Scan Message Type");
     if (!WsV2._i2c_controller->Handle_I2cBusScan(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to add/replace I2C device!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_i2c_device_remove_tag:
     WS_DEBUG_PRINTLN("-> I2C Device Remove Message Type");
     if (!WsV2._i2c_controller->Handle_I2cDeviceRemove(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to remove I2C device!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_pixels_add_tag:
     WS_DEBUG_PRINTLN("-> Pixels Add Message Type");
     if (!WsV2._pixels_controller->Handle_Pixels_Add(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to add pixels strand!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_pixels_remove_tag:
     WS_DEBUG_PRINTLN("-> Pixels Remove Message Type");
     if (!WsV2._pixels_controller->Handle_Pixels_Remove(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to remove pixels strand!");
       return false;
     }
     break;
   case wippersnapper_signal_BrokerToDevice_pixels_write_tag:
     WS_DEBUG_PRINTLN("-> Pixels Write Message Type");
     if (!WsV2._pixels_controller->Handle_Pixels_Write(stream)) {
-      WS_DEBUG_PRINTLN("ERROR: Unable to write to pixels strand!");
+      return false;
+    }
+    break;
+  case wippersnapper_signal_BrokerToDevice_pwm_add_tag:
+    WS_DEBUG_PRINTLN("-> PWM Add Message Type");
+    if (!WsV2._pwm_controller->Handle_PWM_Add(stream)) {
+      return false;
+    }
+    break;
+  case wippersnapper_signal_BrokerToDevice_pwm_write_duty_tag:
+    WS_DEBUG_PRINTLN("-> PWM Write Duty Cycle Message Type");
+    if (!WsV2._pwm_controller->Handle_PWM_Write_DutyCycle(stream)) {
+      return false;
+    }
+    break;
+  case wippersnapper_signal_BrokerToDevice_pwm_write_freq_tag:
+    WS_DEBUG_PRINTLN("-> PWM Write Frequency Message Type");
+    if (!WsV2._pwm_controller->Handle_PWM_Write_Frequency(stream)) {
+      return false;
+    }
+    break;
+  case wippersnapper_signal_BrokerToDevice_pwm_remove_tag:
+    WS_DEBUG_PRINTLN("-> PWM Remove Message Type");
+    if (!WsV2._pwm_controller->Handle_PWM_Remove(stream)) {
+      return false;
+    }
+    break;
+  case wippersnapper_signal_BrokerToDevice_servo_add_tag:
+    WS_DEBUG_PRINTLN("-> Servo Add Message Type");
+    if (!WsV2._servo_controller->Handle_Servo_Add(stream)) {
+      return false;
+    }
+    break;
+  case wippersnapper_signal_BrokerToDevice_servo_write_tag:
+    WS_DEBUG_PRINTLN("-> Servo Write Message Type");
+    if (!WsV2._servo_controller->Handle_Servo_Write(stream)) {
+      return false;
+    }
+    break;
+  case wippersnapper_signal_BrokerToDevice_servo_remove_tag:
+    WS_DEBUG_PRINTLN("-> Servo Remove Message Type");
+    if (!WsV2._servo_controller->Handle_Servo_Remove(stream)) {
       return false;
     }
     break;
@@ -1005,6 +1035,17 @@ bool Wippersnapper_V2::PublishSignal(pb_size_t which_payload, void *payload) {
     MsgSignal.payload.pixels_added =
         *(wippersnapper_pixels_PixelsAdded *)payload;
     break;
+  case wippersnapper_signal_DeviceToBroker_pwm_added_tag:
+    WS_DEBUG_PRINTLN("PWMAdded");
+    MsgSignal.which_payload = wippersnapper_signal_DeviceToBroker_pwm_added_tag;
+    MsgSignal.payload.pwm_added = *(wippersnapper_pwm_PWMAdded *)payload;
+    break;
+  case wippersnapper_signal_DeviceToBroker_servo_added_tag:
+    WS_DEBUG_PRINTLN("ServoAdded");
+    MsgSignal.which_payload =
+        wippersnapper_signal_DeviceToBroker_servo_added_tag;
+    MsgSignal.payload.servo_added = *(wippersnapper_servo_ServoAdded *)payload;
+    break;
   default:
     WS_DEBUG_PRINTLN("ERROR: Invalid signal payload type, bailing out!");
     return false;

src/Wippersnapper_V2.h

@@ -76,19 +76,12 @@
 #include <string>
 #include <vector>
 
-// Nanopb dependencies
+// Nanopb messages and dependencies
+#include "protos/signal.pb.h"
 #include <nanopb/pb_common.h>
 #include <nanopb/pb_decode.h>
 #include <nanopb/pb_encode.h>
 #include <nanopb/ws_pb_helpers.h>
-#include <pb.h>
-
-// Include Signal Proto
-#include "protos/checkin.pb.h"
-#include "protos/digitalio.pb.h"
-#include "protos/ds18x20.pb.h"
-#include "protos/pixels.pb.h"
-#include "protos/signal.pb.h"
 
 // External libraries
 #include "Adafruit_MQTT.h"      // MQTT Client
@@ -112,7 +105,9 @@
 #include "components/ds18x20/controller.h"
 #include "components/i2c/controller.h"
 #include "components/pixels/controller.h"
+#include "components/pwm/controller.h"
 #include "components/sensor/model.h"
+#include "components/servo/controller.h"
 
 // Display
 #ifdef USE_DISPLAY
@@ -153,6 +148,8 @@ class AnalogIOController;
 class DS18X20Controller;
 class I2cController;
 class PixelsController;
+class PWMController;
+class ServoController;
 
 /**************************************************************************/
 /*!
@@ -255,7 +252,10 @@ class Wippersnapper_V2 {
       nullptr;                              ///< Instance of DS18X20 controller
   I2cController *_i2c_controller = nullptr; ///< Instance of I2C controller
   PixelsController *_pixels_controller =
-      nullptr; ///< Instance of Pixels controller
+      nullptr;                              ///< Instance of Pixels controller
+  PWMController *_pwm_controller = nullptr; ///< Instance of PWM controller
+  ServoController *_servo_controller =
+      nullptr; ///< Instance of Servo controller
 
   // TODO: does this really need to be global?
   uint8_t _macAddrV2[6];  /*!< Unique network iface identifier */

src/components/ds18x20/model.cpp

@@ -24,7 +24,6 @@ DS18X20Model::DS18X20Model() {
   memset(&_msg_DS18x20Added, 0, sizeof(_msg_DS18x20Added));
   memset(&_msg_DS18x20Remove, 0, sizeof(_msg_DS18x20Remove));
   memset(&_msg_DS18x20Event, 0, sizeof(_msg_DS18x20Event));
-  // no-op
 }
 
 /***********************************************************************/