prepare script improvements

Dockerfile

@@ -163,6 +163,7 @@ libpcap0.8-dev \
 iproute2 \
 udev \
 gawk \
+jq \
 bash-completion \
 && rm -rf /var/lib/apt/lists/*
 

hack/prepare.sh

@@ -11,7 +11,7 @@ set -Eeuo pipefail
 
 OPT_MULTIPORT=false
 
-BLUEFIELD_IDENTIFIERS=("MT_0000000543", "MT_0000000541")
+BLUEFIELD_IDENTIFIERS=("MT_0000000543" "MT_0000000541")
 MAX_NUMVFS_POSSIBLE=126
 NUMVFS_DESIRED=126
 CONFIG="/tmp/dp_service.conf"
@@ -32,18 +32,17 @@ function err() {
 }
 
 function get_pfs() {
-	if [[ "$OPT_MULTIPORT" == "true" ]]; then
-		readarray -t devs < <(devlink dev | grep '^pci/' | awk -F/ '{print $2}')
-	else
-		readarray -t devs < <(devlink dev | awk -F/ '{print $2}')
-	fi
+	readarray -t devs < <(devlink -js dev | jq -r '.dev | keys[] | select(startswith("pci/")) | sub("pci/"; "")')
 }
 
 function detect_card_and_arch_type() {
 	local pf="${devs[0]}"
 	local is_bluefield=false
+	local devlink_info
+	devlink_info=$(devlink -js dev info "pci/$pf")
+
 	for id in "${BLUEFIELD_IDENTIFIERS[@]}"; do
-		if devlink dev info pci/$pf | grep -q "$id"; then
+		if echo "$devlink_info" | jq -e '.. | strings | select(. == "'"$id"'")' > /dev/null; then
 			is_bluefield=true
 			log "Detected BlueField card with identifier $id on pf: $pf"
 			break
@@ -84,10 +83,12 @@ function detect_card_and_arch_type() {
 }
 
 function validate() {
-	# we check if we have devlink available
-	if ! command -v devlink 2> /dev/null; then
+	if ! command -v devlink &> /dev/null; then
 		err "devlink not available, exiting"
 	fi
+	if ! command -v jq &> /dev/null; then
+		err "jq not available, exiting"
+	fi
 }
 
 function validate_pf() {
@@ -104,7 +105,7 @@ function validate_pf() {
 	# we check if sr-iov is enabled and the dev is using the mlx5 driver
 	unset valid_devs
 	for pf in "${devs[@]}"; do
-	    log "check pf $pf"
+		log "check pf $pf"
 		if [ ! -f "/sys/bus/pci/devices/$pf/sriov_numvfs" ]; then
 			log "pf $pf doesn't support sriov, excluding"
 			continue
@@ -123,7 +124,7 @@ process_switchdev_mode() {
 	local pf=$1
 
 	log "enabling switchdev for $pf"
-	if ! devlink dev eswitch set pci/$pf mode switchdev; then
+	if ! devlink dev eswitch set "pci/$pf" mode switchdev; then
 		err "can't set eswitch mode"
 	fi
 	log "now waiting for everything to settle"
@@ -134,7 +135,7 @@ process_multiport_eswitch_mode() {
 	local pf=$1
 
 	log "enabling multiport eswitch mode for $pf"
-	if ! devlink dev param set pci/$pf name esw_multiport value true cmode runtime; then
+	if ! devlink dev param set "pci/$pf" name esw_multiport value true cmode runtime; then
 		err "can't enable multiport eswitch mode"
 	fi
 	log "now waiting for everything to settle"
@@ -215,8 +216,9 @@ function create_vf() {
 	log "disabling automatic binding of VFs on pf0 '$pf0'"
 	echo 0 > /sys/bus/pci/devices/$pf0/sriov_drivers_autoprobe
 
-	if [[ "$IS_X86_WITH_MLX" == "true" ]]; then
+	if [[ "$IS_X86_WITH_MLX" == "true" || "$IS_X86_WITH_BLUEFIELD" == "true" ]]; then
 		# enable switchdev mode, this operation takes most time
+		log "Enabling switchdev mode for MLX or BlueField card on x86"
 		if [[ "$OPT_MULTIPORT" == "true" ]]; then
 			for pf in "${devs[@]}"; do
 				process_switchdev_mode "$pf"
@@ -247,43 +249,85 @@ function create_vf() {
 }
 
 
+get_raw_vf_pattern() {
+	local dev=$1
+	devlink -js port | \
+		jq -r --arg dev "$dev" '.port | to_entries[] | select(.key | startswith("pci/" + $dev)) | select(.value.flavour=="pcivf") | .value.netdev' | \
+		sed -rn 's/(.*[a-z_])[0-9]{1,3}$/\1/p' | \
+		uniq
+}
+
 function get_pattern() {
 	local dev=$1
-	pattern=$(devlink port | grep pci/$dev/ | grep "virtual\|pcivf" | awk '{print $5}' | sed -rn 's/(.*[a-z_])[0-9]{1,3}$/\1/p' | uniq)
-	if [ -z "$pattern" ]; then
-		err "can't determine the vf pattern for $dev"
-	elif [ $(wc -l <<< "$pattern") -ne 1 ]; then
-		err "multiple vf patterns found for $dev"
+	local pattern
+
+	if [[ "$IS_ARM_WITH_BLUEFIELD" == "true" ]]; then
+		local timeout_seconds=120
+		local interval_seconds=2
+		local end_time=$(( $(date +%s) + timeout_seconds ))
+
+		while [ $(date +%s) -lt $end_time ]; do
+			pattern=$(get_raw_vf_pattern "$dev")
+			if [ -n "$pattern" ]; then
+				if [ $(wc -l <<< "$pattern") -eq 1 ]; then
+					sleep $interval_seconds
+					echo "$pattern"
+					return
+				fi
+			fi
+			sleep $interval_seconds
+		done
+		err "timed out after ${timeout_seconds}s waiting for the vf pattern for $dev"
+	else
+		pattern=$(get_raw_vf_pattern "$dev")
+		if [ -z "$pattern" ]; then
+			err "can't determine the vf pattern for $dev"
+		elif [ $(wc -l <<< "$pattern") -ne 1 ]; then
+			err "multiple vf patterns found for $dev"
+		fi
+		echo "$pattern"
 	fi
-	echo "$pattern"
 }
 
 function get_ifname() {
-	local port=$1
-	devlink port | grep "physical port $port" | awk '{ print $5}'
+	local port_idx=$1
+	devlink -js port | jq -r --argjson idx "$port_idx" '.port | .[] | select(.flavour=="physical" and .port==$idx) | .netdev'
 }
 
 function get_ipv6() {
-	# TODO: this needs to be done in a better way
-	while read -r l1; do
-		if [ "$l1" != "::1/128" ]; then
-			echo ${l1%/*}
-			return
-		fi
-	done < <(ip -6 -o addr show lo | awk '{print $4}')
-	err "no ipv6 found"
-}
+	local ip_json
+	ip_json=$(ip -js -6 addr show lo)
 
-function make_config() {
-	if [[ "$IS_X86_WITH_BLUEFIELD" == "true" ]]; then
-		log "Skipping config file creation on AMD/Intel 64-bit host with Bluefield"
+	if [ -z "$ip_json" ]; then
+		err "Could not retrieve address information for interface 'lo'."
+		return 1
+	fi
+
+	#   1. Have a "global" scope.
+	#   2. Have a prefix length of 64 or more.
+	#   3. Must be in Globally Unique Address (GUA) range (2 or 3).
+	local global_address
+	global_address=$(echo "$ip_json" | jq -r '
+		.[0].addr_info[]
+		| select(
+			.scope == "global" and
+			.prefixlen >= 64 and
+			(.local | test("^(2|3)"))
+		)
+		| .local' | head -n 1)
+
+	if [ -n "$global_address" ]; then
+		echo "$global_address"
 		return
 	fi
 
-	# To make error propagation work, need to assign separately
+	err "No Global Unicast IPv6 address with prefix >= 64 found on 'lo'."
+}
+
+function make_config() {
 	conf_pf0="$(get_ifname 0)"
 	conf_pf1="$(get_ifname 1)"
-	conf_vf_pattern="$(get_pattern ${devs[0]})"
+	conf_vf_pattern="$(get_pattern "${devs[0]}")"
 	conf_ipv6="$(get_ipv6)"
 
 	{ echo "# This has been generated by prepare.sh"
@@ -345,5 +389,9 @@ validate
 get_pfs
 detect_card_and_arch_type
 validate_pf
+# Bluefield relies on host side creating VFs, so wait here for systemd to settle and dont rush with the next steps
+if [[ "$IS_ARM_WITH_BLUEFIELD" == "true" ]]; then
+	udevadm settle
+fi
 create_vf
 make_config