Camera_RDI_FrameCapture: stabilize RDI capture via parsed media-graph config + richer CI diagnostics

Runner/suites/Multimedia/Camera/Camera_RDI_FrameCapture/run.sh

@@ -1,33 +1,26 @@
 #!/bin/sh
 # Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
 # SPDX-License-Identifier: BSD-3-Clause-Clear
-
+# --- Robustly find and source init_env ---------------------------
 SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
 INIT_ENV=""
 SEARCH="$SCRIPT_DIR"
 while [ "$SEARCH" != "/" ]; do
     if [ -f "$SEARCH/init_env" ]; then
-        INIT_ENV="$SEARCH/init_env"
-        break
+        INIT_ENV="$SEARCH/init_env"; break
     fi
     SEARCH=$(dirname "$SEARCH")
 done
+[ -z "$INIT_ENV" ] && echo "[ERROR] Could not find init_env (starting at $SCRIPT_DIR)" >&2 && exit 1
 
-if [ -z "$INIT_ENV" ]; then
-    echo "[ERROR] Could not find init_env (starting at $SCRIPT_DIR)" >&2
-    exit 1
-fi
-
-if [ -z "$__INIT_ENV_LOADED" ]; then
-    # shellcheck disable=SC1090
-    . "$INIT_ENV"
-fi
+# shellcheck disable=SC1090
+[ -z "$__INIT_ENV_LOADED" ] && . "$INIT_ENV"
 # shellcheck disable=SC1090,SC1091
 . "$TOOLS/functestlib.sh"
 
 TESTNAME="Camera_RDI_FrameCapture"
 RES_FILE="./$TESTNAME.res"
-test_path=$(find_test_case_by_name "$TESTNAME")
+test_path="$(find_test_case_by_name "$TESTNAME")"
 cd "$test_path" || exit 1
 
 print_usage() {
@@ -50,44 +43,153 @@ USER_FORMAT=""
 FRAMES=10
 while [ $# -gt 0 ]; do
     case "$1" in
-        --format)
-            shift
-            USER_FORMAT="$1"
-            ;;
-        --frames)
-            shift
-            FRAMES="$1"
-            ;;
-        --help)
-            print_usage
-            exit 0
-            ;;
-        *)
-            log_error "Unknown argument: $1"
-            print_usage
-            exit 1
-            ;;
+        --format) shift; USER_FORMAT="$1" ;;
+        --frames) shift; FRAMES="$1" ;;
+        --help) print_usage; exit 0 ;;
+        *) log_error "Unknown argument: $1"; print_usage; exit 1 ;;
     esac
     shift
 done
 
-# --------- Prechecks ---------
+# Helper: print planned media-ctl / yavta sequence for CI logs
+print_planned_commands() {
+    media_node="$1"
+    pixfmt="$2"
+
+    log_info "[CI] Planned sequence:"
+    log_info " media-ctl -d $media_node --reset"
+
+    # media-ctl -V (show with possible TARGET_FORMAT substitution exactly like configure helper does)
+    if [ -n "$MEDIA_CTL_V_LIST" ]; then
+        printf '%s\n' "$MEDIA_CTL_V_LIST" | while IFS= read -r vline; do
+            [ -z "$vline" ] && continue
+            vline_out="$(printf '%s' "$vline" | sed -E "s/fmt:[^/]+\/([0-9]+x[0-9]+)/fmt:${pixfmt}\/\1/g")"
+            log_info " media-ctl -d $media_node -V '$vline_out'"
+        done
+    fi
+    # media-ctl -l
+    if [ -n "$MEDIA_CTL_L_LIST" ]; then
+        printf '%s\n' "$MEDIA_CTL_L_LIST" | while IFS= read -r lline; do
+            [ -z "$lline" ] && continue
+            log_info " media-ctl -d $media_node -l '$lline'"
+        done
+    fi
+    # yavta control writes (pre)
+    if [ -n "$YAVTA_CTRL_PRE_LIST" ]; then
+        printf '%s\n' "$YAVTA_CTRL_PRE_LIST" | while IFS= read -r ctrl; do
+            [ -z "$ctrl" ] && continue
+            dev="$(printf '%s' "$ctrl" | awk '{print $1}')"
+            reg="$(printf '%s' "$ctrl" | awk '{print $2}')"
+            val="$(printf '%s' "$ctrl" | awk '{print $3}')"
+            [ -n "$dev" ] && [ -n "$reg" ] && [ -n "$val" ] && \
+              log_info " yavta --no-query -w '$reg $val' $dev"
+        done
+    fi
+    # main yavta capture (dimensions may be empty occasionally)
+    size_arg=""
+    if [ -n "$YAVTA_W" ] && [ -n "$YAVTA_H" ]; then
+        size_arg="-s ${YAVTA_W}x${YAVTA_H}"
+    fi
+    if [ -n "$YAVTA_DEV" ]; then
+        log_info " yavta -B capture-mplane -c -I -n $FRAMES -f $pixfmt $size_arg -F $YAVTA_DEV --capture=$FRAMES --file='frame-#.bin'"
+    fi
+    # yavta control writes (post)
+    if [ -n "$YAVTA_CTRL_POST_LIST" ]; then
+        printf '%s\n' "$YAVTA_CTRL_POST_LIST" | while IFS= read -r ctrl; do
+            [ -z "$ctrl" ] && continue
+            dev="$(printf '%s' "$ctrl" | awk '{print $1}')"
+            reg="$(printf '%s' "$ctrl" | awk '{print $2}')"
+            val="$(printf '%s' "$ctrl" | awk '{print $3}')"
+            [ -n "$dev" ] && [ -n "$reg" ] && [ -n "$val" ] && \
+              log_info " yavta --no-query -w '$reg $val' $dev"
+        done
+    fi
+}
+
+# --------- DT Precheck ---------
 if ! dt_confirm_node_or_compatible "isp" "cam" "camss"; then
     log_skip "$TESTNAME SKIP – No ISP/camera node/compatible found in DT"
     echo "$TESTNAME SKIP" >"$RES_FILE"
     exit 0
 fi
 
-DRIVER_MOD="qcom_camss"
-DMESG_MODULES='qcom_camss|camss|isp'
-DMESG_EXCLUDE='dummy regulator|supply [^ ]+ not found|using dummy regulator|Failed to create device link|reboot-mode.*-EEXIST|can.t register reboot mode'
+# --------- Kernel config sanity (MANDATORY bits only gate if totally absent) ---------
+log_info "[CONFIG] Expect at least: CONFIG_VIDEO_QCOM_CAMSS=y (or =m)"
+check_kernel_config "CONFIG_VIDEO_QCOM_CAMSS CONFIG_MEDIA_CONTROLLER CONFIG_V4L2_FWNODE" \
+  || log_warn "[CONFIG] One or more options missing; will continue if CAMSS stack is otherwise present"
 
-if ! is_module_loaded "$DRIVER_MOD"; then
-    log_skip "$TESTNAME SKIP – Driver module $DRIVER_MOD not loaded"
+# Optional visibility: print any CAMCC entries (name varies by tree)
+if ! check_kernel_config "CONFIG_QCOM_CAMCC_SC7280"; then
+    if command -v zgrep >/dev/null 2>&1; then
+        CAMCC_SYMS="$(zgrep -E '^CONFIG_.*CAMCC.*=(y|m)' /proc/config.gz 2>/dev/null || true)"
+    else
+        CAMCC_SYMS="$(gzip -dc /proc/config.gz 2>/dev/null | grep -E '^CONFIG_.*CAMCC.*=(y|m)' || true)"
+    fi
+    if [ -n "$CAMCC_SYMS" ]; then
+        printf '%s\n' "$CAMCC_SYMS" | while IFS= read -r s; do
+            [ -n "$s" ] && log_info "[CONFIG] $s"
+        done
+    fi
+fi
+
+# --------- Broader readiness gate (module OR builtin OR nodes OR dmesg) ---------
+DMESG_CACHE="$(dmesg 2>/dev/null || true)"
+
+if [ -e /dev/media0 ] || [ -e /dev/video0 ]; then
+    log_pass "[READY] Media/video nodes present:"
+    for f in /dev/media* /dev/video*; do
+        [ -e "$f" ] || continue
+        log_info " - $f"
+    done
+elif is_module_loaded qcom_camss; then
+    log_pass "[READY] qcom_camss module loaded"
+elif [ -d /sys/module/qcom_camss ]; then
+    log_pass "[READY] qcom_camss present as builtin"
+elif printf '%s\n' "$DMESG_CACHE" | grep -qiE 'qcom[-_]camss'; then
+    log_info "[READY] CAMSS messages found in dmesg (likely builtin)"
+else
+    log_skip "Camera_RDI_FrameCapture SKIP – CAMSS driver not present (module or built-in)"
     echo "$TESTNAME SKIP" >"$RES_FILE"
     exit 0
 fi
 
+# --------- Module inventory (visibility only; no gating) ---------
+MODULES_LIST="qcom_camss camcc_sc7280 videodev mc v4l2_fwnode v4l2_async videobuf2_common videobuf2_v4l2 videobuf2_dma_contig videobuf2_dma_sg videobuf2_memops"
+
+present_mods=""
+builtin_mods=""
+missing_mods=""
+for m in $MODULES_LIST; do
+    if is_module_loaded "$m"; then
+        present_mods="$present_mods $m"
+    elif [ -d "/sys/module/$m" ]; then
+        builtin_mods="$builtin_mods $m"
+    else
+        missing_mods="$missing_mods $m"
+    fi
+done
+
+if [ -n "$present_mods" ]; then
+    log_pass "[MODULES] Loaded:"
+    for m in $present_mods; do [ -n "$m" ] && log_info " - $m"; done
+fi
+if [ -n "$builtin_mods" ]; then
+    log_info "[MODULES] Built-in:"
+    for m in $builtin_mods; do [ -n "$m" ] && log_info " - $m"; done
+fi
+if [ -n "$missing_mods" ]; then
+    log_warn "[MODULES] Not found:"
+    for m in $missing_mods; do [ -n "$m" ] && log_info " - $m"; done
+fi
+
+# Sensor modules (best-effort)
+SENSOR_MODS="$(awk '{print $1}' /proc/modules 2>/dev/null | grep -E '^(imx|ov|gc|ar)[0-9]+' | tr '\n' ' ')"
+[ -n "$SENSOR_MODS" ] && { log_info "[MODULES] Sensors:"; for s in $SENSOR_MODS; do log_info " - $s"; done; }
+
+# --------- Dmesg probe errors (non-benign filter) ---------
+DRIVER_MOD="qcom_camss"
+DMESG_MODULES='qcom_camss|camss|isp'
+DMESG_EXCLUDE='dummy regulator|supply [^ ]+ not found|using dummy regulator|Failed to create device link|reboot-mode.*-EEXIST|can.t register reboot mode'
 if scan_dmesg_errors "$SCRIPT_DIR" "$DMESG_MODULES" "$DMESG_EXCLUDE"; then
     log_skip "$TESTNAME SKIP – $DRIVER_MOD probe errors detected in dmesg"
     echo "$TESTNAME SKIP" >"$RES_FILE"
@@ -102,100 +204,101 @@ check_dependencies media-ctl yavta python3 v4l2-ctl || {
 }
 
 # --------- Media Node Detection ---------
-MEDIA_NODE=$(detect_media_node)
+MEDIA_NODE="$(detect_media_node)"
 if [ -z "$MEDIA_NODE" ]; then
     log_skip "$TESTNAME SKIP – Media node not found"
     echo "$TESTNAME SKIP" >"$RES_FILE"
     exit 0
 fi
 log_info "Detected media node: $MEDIA_NODE"
 
-# --------- Pipeline Detection ---------
-TOPO_FILE=$(mktemp "/tmp/${TESTNAME}_topo.XXXXXX")
-TMP_PIPELINES_FILE=$(mktemp "/tmp/${TESTNAME}_blocks.XXXXXX")
+# Light-touch global reset once
+media-ctl -d "$MEDIA_NODE" -r >/dev/null 2>&1 || true
+log_info "Media graph reset (-r) done on $MEDIA_NODE"
+sleep 0.2
+
+# --------- Pipeline Detection (Python) ---------
+TOPO_FILE="$(mktemp "/tmp/${TESTNAME}_topo.XXXXXX")"
+TMP_PIPELINES_FILE="$(mktemp "/tmp/${TESTNAME}_blocks.XXXXXX")"
 trap 'rm -f "$TOPO_FILE" "$TMP_PIPELINES_FILE"' EXIT
 
 media-ctl -p -d "$MEDIA_NODE" >"$TOPO_FILE" 2>/dev/null
-PYTHON_PIPELINES=$(run_camera_pipeline_parser "$TOPO_FILE")
+PYTHON_PIPELINES="$(run_camera_pipeline_parser "$TOPO_FILE")"
 if [ -z "$PYTHON_PIPELINES" ]; then
     log_skip "$TESTNAME SKIP – No valid pipelines found"
     echo "$TESTNAME SKIP" >"$RES_FILE"
     exit 0
 fi
-
-printf "%s\n" "$PYTHON_PIPELINES" > "$TMP_PIPELINES_FILE"
+printf '%s\n' "$PYTHON_PIPELINES" >"$TMP_PIPELINES_FILE"
 
 log_info "User format override: ${USER_FORMAT:-<none>}"
 log_info "Frame count per pipeline: $FRAMES"
 
-# --------- Pipeline Processing ---------
+# --------- Pipeline Processing (core logic unchanged) ---------
 PASS=0; FAIL=0; SKIP=0; COUNT=0
 block=""
-
 while IFS= read -r line || [ -n "$line" ]; do
     if [ "$line" = "--" ]; then
         COUNT=$((COUNT+1))
         TMP="/tmp/cam_block.$$.$COUNT"
-        printf "%s\n" "$block" > "$TMP"
+        printf '%s\n' "$block" > "$TMP"
 
-        # Parses block and sets SENSOR, VIDEO, YAVTA_DEV, FMT, etc
+        # Parses block and sets SENSOR, VIDEO, YAVTA_DEV, YAVTA_FMT, MEDIA_CTL_* lists, etc.
         parse_pipeline_block "$TMP"
         rm -f "$TMP"
 
         # -------- Multi-format support (POSIX style, no arrays) --------
         FORMATS_LIST="$USER_FORMAT"
-        if [ -z "$FORMATS_LIST" ]; then
-            # No user override, use detected format for this pipeline only
-            FORMATS_LIST="$YAVTA_FMT"
-        fi
+        [ -z "$FORMATS_LIST" ] && FORMATS_LIST="$YAVTA_FMT"
 
-        OLD_IFS="$IFS"
-        IFS=','
+        OLD_IFS="$IFS"; IFS=','
         for FMT_OVERRIDE in $FORMATS_LIST; do
-            FMT_OVERRIDE=$(printf '%s' "$FMT_OVERRIDE" | sed 's/^ *//;s/ *$//')
-            TARGET_FORMAT="$FMT_OVERRIDE"
-            [ -z "$TARGET_FORMAT" ] && TARGET_FORMAT="$YAVTA_FMT"
+            FMT_OVERRIDE="$(printf '%s' "$FMT_OVERRIDE" | sed 's/^ *//;s/ *$//')"
+            TARGET_FORMAT="$FMT_OVERRIDE"; [ -z "$TARGET_FORMAT" ] && TARGET_FORMAT="$YAVTA_FMT"
 
-            log_info "----- Pipeline $COUNT: ${SENSOR:-unknown} $VIDEO $TARGET_FORMAT -----"
+            # New banner: show pad mbus fmt and video pixfmt
+            PAD_MBUS_FMT="$(printf '%s\n' "$MEDIA_CTL_V_LIST" | sed -n 's/.*fmt:\([^/]]*\)\/.*/\1/p' | head -n1)"
+            [ -z "$PAD_MBUS_FMT" ] && PAD_MBUS_FMT="auto"
+            log_info "----- Pipeline $COUNT: ${SENSOR:-unknown} $VIDEO [pads:$PAD_MBUS_FMT] [video:$TARGET_FORMAT] -----"
 
             if [ -z "$VIDEO" ] || [ "$VIDEO" = "None" ] || [ -z "$YAVTA_DEV" ]; then
                 log_skip "$SENSOR: Invalid pipeline – skipping"
                 SKIP=$((SKIP+1))
                 continue
             fi
 
+            # CI debug: print the exact commands we will run
+            print_planned_commands "$MEDIA_NODE" "$TARGET_FORMAT"
+
+            # Configure & capture (original helpers)
             configure_pipeline_block "$MEDIA_NODE" "$TARGET_FORMAT"
             execute_capture_block "$FRAMES" "$TARGET_FORMAT"
             RET=$?
 
+            # Safety net retry
+            if [ "$RET" -ne 0 ]; then
+                log_warn "First attempt failed; resetting media graph and retrying once"
+                log_info " media-ctl -d $MEDIA_NODE -r"
+                media-ctl -d "$MEDIA_NODE" -r >/dev/null 2>&1 || true
+                sleep 0.1
+                print_planned_commands "$MEDIA_NODE" "$TARGET_FORMAT"
+                configure_pipeline_block "$MEDIA_NODE" "$TARGET_FORMAT"
+                execute_capture_block "$FRAMES" "$TARGET_FORMAT"
+                RET=$?
+            fi
+
             case "$RET" in
-                0)
-                    log_pass "$SENSOR $VIDEO $TARGET_FORMAT PASS"
-                    PASS=$((PASS+1))
-                    ;;
-                1)
-                    log_fail "$SENSOR $VIDEO $TARGET_FORMAT FAIL (capture failed)"
-                    FAIL=$((FAIL+1))
-                    ;;
-                2)
-                    log_skip "$SENSOR $VIDEO $TARGET_FORMAT SKIP (unsupported format)"
-                    SKIP=$((SKIP+1))
-                    ;;
-                3)
-                    log_skip "$SENSOR $VIDEO missing data – skipping"
-                    SKIP=$((SKIP+1))
-                    ;;
+                0) log_pass "$SENSOR $VIDEO $TARGET_FORMAT PASS"; PASS=$((PASS+1)) ;;
+                1) log_fail "$SENSOR $VIDEO $TARGET_FORMAT FAIL (capture failed)"; FAIL=$((FAIL+1)) ;;
+                2) log_skip "$SENSOR $VIDEO $TARGET_FORMAT SKIP (unsupported format)"; SKIP=$((SKIP+1)) ;;
+                3) log_skip "$SENSOR $VIDEO missing data – skipping"; SKIP=$((SKIP+1)) ;;
             esac
         done
         IFS="$OLD_IFS"
         block=""
     else
-        if [ -z "$block" ]; then
-            block="$line"
-        else
-            block="$block
-$line"
-        fi
+        if [ -z "$block" ]; then block="$line"; else block="$block
+$line"; fi
     fi
 done < "$TMP_PIPELINES_FILE"
 
@@ -207,5 +310,4 @@ elif [ "$FAIL" -gt 0 ]; then
 else
     echo "$TESTNAME SKIP" >"$RES_FILE"
 fi
-
 exit 0