Added some Waveshare board support

src/boards/include/boards/waveshare_pico_cam_a.h

@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// pico_cmake_set PICO_PLATFORM=rp2040
+
+#ifndef _BOARDS_WAVESHARE_PICO_CAM_A_H
+#define _BOARDS_WAVESHARE_PICO_CAM_A_H
+
+// For board detection
+#define WAVESHARE_PICO_CAM_A
+
+// --- UART ---
+#ifndef PICO_DEFAULT_UART
+#define PICO_DEFAULT_UART 0
+#endif
+#ifndef PICO_DEFAULT_UART_TX_PIN
+#define PICO_DEFAULT_UART_TX_PIN 0
+#endif
+#ifndef PICO_DEFAULT_UART_RX_PIN
+#define PICO_DEFAULT_UART_RX_PIN 1
+#endif
+
+// no PICO_DEFAULT_WS2812_PIN
+
+// --- I2C ---
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C 1
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN 2
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN 3
+#endif
+
+// --- LCD ---
+#ifndef WAVESHARE_LCD_SPI
+#define WAVESHARE_LCD_SPI 1
+#endif
+#ifndef WAVESHARE_LCD_DC_PIN
+#define WAVESHARE_LCD_DC_PIN 9
+#endif
+#ifndef WAVESHARE_LCD_CS_PIN
+#define WAVESHARE_LCD_CS_PIN 13
+#endif
+#ifndef WAVESHARE_LCD_SCLK_PIN
+#define WAVESHARE_LCD_SCLK_PIN 10
+#endif
+#ifndef WAVESHARE_LCD_TX_PIN
+#define WAVESHARE_LCD_TX_PIN 11
+#endif
+#ifndef WAVESHARE_LCD_RST_PIN
+#define WAVESHARE_LCD_RST_PIN 7
+#endif
+
+// --- FLASH ---
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (16 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (16 * 1024 * 1024)
+#endif
+// Drive high to force power supply into PWM mode (lower ripple on 3V3 at light loads)
+#define PICO_SMPS_MODE_PIN 23
+
+// All boards have B1 RP2040
+#ifndef PICO_RP2040_B0_SUPPORTED
+#define PICO_RP2040_B0_SUPPORTED  0
+#endif
+
+#endif

src/boards/include/boards/waveshare_rp2040_ble.h

@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// pico_cmake_set PICO_PLATFORM=rp2040
+
+#ifndef _BOARDS_WAVESHARE_RP2040_BLE_H
+#define _BOARDS_WAVESHARE_RP2040_BLE_H
+
+// For board detection
+#define WAVESHARE_RP2040_BLE
+
+// --- UART ---
+#ifndef PICO_DEFAULT_UART
+#define PICO_DEFAULT_UART 0
+#endif
+#ifndef PICO_DEFAULT_UART_TX_PIN
+#define PICO_DEFAULT_UART_TX_PIN 0
+#endif
+#ifndef PICO_DEFAULT_UART_RX_PIN
+#define PICO_DEFAULT_UART_RX_PIN 1
+#endif
+
+// --- WS2812 ---
+#ifndef PICO_DEFAULT_WS2812_PIN
+#define PICO_DEFAULT_WS2812_PIN 16
+#endif
+
+// --- I2C ---
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C 1
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN 6
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN 7
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN 2
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN 3
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN 4
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN 5
+#endif
+
+// --- FLASH ---
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (2 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (2 * 1024 * 1024)
+#endif
+// Drive high to force power supply into PWM mode (lower ripple on 3V3 at light loads)
+#define PICO_SMPS_MODE_PIN 23
+
+// All boards have B1 RP2040
+#ifndef PICO_RP2040_B0_SUPPORTED
+#define PICO_RP2040_B0_SUPPORTED  0
+#endif
+
+#endif

src/boards/include/boards/waveshare_rp2040_eth.h

@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// pico_cmake_set PICO_PLATFORM=rp2040
+
+#ifndef _BOARDS_WAVESHARE_RP2040_ETH_H
+#define _BOARDS_WAVESHARE_RP2040_ETH_H
+
+// For board detection
+#define WAVESHARE_RP2040_ETH
+
+// --- UART ---
+#ifndef PICO_DEFAULT_UART
+#define PICO_DEFAULT_UART 0
+#endif
+#ifndef PICO_DEFAULT_UART_TX_PIN
+#define PICO_DEFAULT_UART_TX_PIN 0
+#endif
+#ifndef PICO_DEFAULT_UART_RX_PIN
+#define PICO_DEFAULT_UART_RX_PIN 1
+#endif
+
+// --- WS2812 ---
+#ifndef PICO_DEFAULT_WS2812_PIN
+#define PICO_DEFAULT_WS2812_PIN 25
+#endif
+
+// --- I2C ---
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C 1
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN 6
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN 7
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN 2
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN 3
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN 4
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN 5
+#endif
+
+// --- FLASH ---
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (4 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (4 * 1024 * 1024)
+#endif
+// Drive high to force power supply into PWM mode (lower ripple on 3V3 at light loads)
+#define PICO_SMPS_MODE_PIN 23
+
+// All boards have B1 RP2040
+#ifndef PICO_RP2040_B0_SUPPORTED
+#define PICO_RP2040_B0_SUPPORTED  0
+#endif
+
+#endif

src/boards/include/boards/waveshare_rp2040_geek.h

@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// -----------------------------------------------------
+// NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO
+//       SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES
+// -----------------------------------------------------
+
+// pico_cmake_set PICO_PLATFORM=rp2040
+
+#ifndef _BOARDS_WAVESHARE_RP2040_GEEK_H
+#define _BOARDS_WAVESHARE_RP2040_GEEK_H
+
+// For board detection
+#define WAVESHARE_RP2040_GEEK
+
+// --- UART ---
+#ifndef PICO_DEFAULT_UART
+#define PICO_DEFAULT_UART 1
+#endif
+#ifndef PICO_DEFAULT_UART_TX_PIN
+#define PICO_DEFAULT_UART_TX_PIN 4
+#endif
+#ifndef PICO_DEFAULT_UART_RX_PIN
+#define PICO_DEFAULT_UART_RX_PIN 5
+#endif
+
+// no PICO_DEFAULT_WS2812_PIN
+
+// --- I2C ---
+#ifndef PICO_DEFAULT_I2C
+#define PICO_DEFAULT_I2C 1
+#endif
+#ifndef PICO_DEFAULT_I2C_SDA_PIN
+#define PICO_DEFAULT_I2C_SDA_PIN 2
+#endif
+#ifndef PICO_DEFAULT_I2C_SCL_PIN
+#define PICO_DEFAULT_I2C_SCL_PIN 3
+#endif
+
+// --- SPI ---
+#ifndef PICO_DEFAULT_SPI
+#define PICO_DEFAULT_SPI 0
+#endif
+#ifndef PICO_DEFAULT_SPI_SCK_PIN
+#define PICO_DEFAULT_SPI_SCK_PIN 18
+#endif
+#ifndef PICO_DEFAULT_SPI_TX_PIN
+#define PICO_DEFAULT_SPI_TX_PIN 19
+#endif
+#ifndef PICO_DEFAULT_SPI_RX_PIN
+#define PICO_DEFAULT_SPI_RX_PIN 20
+#endif
+#ifndef PICO_DEFAULT_SPI_CSN_PIN
+#define PICO_DEFAULT_SPI_CSN_PIN 17
+#endif
+
+// --- LCD ---
+#ifndef WAVESHARE_LCD_SPI
+#define WAVESHARE_LCD_SPI 1
+#endif
+#ifndef WAVESHARE_LCD_DC_PIN
+#define WAVESHARE_LCD_DC_PIN 8
+#endif
+#ifndef WAVESHARE_LCD_CS_PIN
+#define WAVESHARE_LCD_CS_PIN 9
+#endif
+#ifndef WAVESHARE_LCD_SCLK_PIN
+#define WAVESHARE_LCD_SCLK_PIN 10
+#endif
+#ifndef WAVESHARE_LCD_TX_PIN
+#define WAVESHARE_LCD_TX_PIN 11
+#endif
+#ifndef WAVESHARE_LCD_RST_PIN
+#define WAVESHARE_LCD_RST_PIN 12
+#endif
+#ifndef WAVESHARE_LCD_BL_PIN
+#define WAVESHARE_LCD_BL_PIN 25
+#endif
+
+// --- FLASH ---
+#define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1
+
+#ifndef PICO_FLASH_SPI_CLKDIV
+#define PICO_FLASH_SPI_CLKDIV 2
+#endif
+
+// pico_cmake_set_default PICO_FLASH_SIZE_BYTES = (4 * 1024 * 1024)
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (4 * 1024 * 1024)
+#endif
+// Drive high to force power supply into PWM mode (lower ripple on 3V3 at light loads)
+#define PICO_SMPS_MODE_PIN 23
+
+// All boards have B1 RP2040
+#ifndef PICO_RP2040_B0_SUPPORTED
+#define PICO_RP2040_B0_SUPPORTED  0
+#endif
+
+#endif

src/boards/include/boards/waveshare_rp2040_lcd_0.96.h

@@ -59,26 +59,26 @@
 #endif
 
 // --- LCD ---
-#ifndef WAVESHARE_RP2040_LCD_SPI
-#define WAVESHARE_RP2040_LCD_SPI 1
+#ifndef WAVESHARE_LCD_SPI
+#define WAVESHARE_LCD_SPI 1
 #endif
-#ifndef WAVESHARE_RP2040_LCD_DC_PIN
-#define WAVESHARE_RP2040_LCD_DC_PIN 8
+#ifndef WAVESHARE_LCD_DC_PIN
+#define WAVESHARE_LCD_DC_PIN 8
 #endif
-#ifndef WAVESHARE_RP2040_LCD_CS_PIN
-#define WAVESHARE_RP2040_LCD_CS_PIN 9
+#ifndef WAVESHARE_LCD_CS_PIN
+#define WAVESHARE_LCD_CS_PIN 9
 #endif
-#ifndef WAVESHARE_RP2040_LCD_SCLK_PIN
-#define WAVESHARE_RP2040_LCD_SCLK_PIN 10
+#ifndef WAVESHARE_LCD_SCLK_PIN
+#define WAVESHARE_LCD_SCLK_PIN 10
 #endif
-#ifndef WAVESHARE_RP2040_LCD_TX_PIN
-#define WAVESHARE_RP2040_LCD_TX_PIN 11
+#ifndef WAVESHARE_LCD_TX_PIN
+#define WAVESHARE_LCD_TX_PIN 11
 #endif
-#ifndef WAVESHARE_RP2040_LCD_RST_PIN
-#define WAVESHARE_RP2040_LCD_RST_PIN 12
+#ifndef WAVESHARE_LCD_RST_PIN
+#define WAVESHARE_LCD_RST_PIN 12
 #endif
-#ifndef WAVESHARE_RP2040_LCD_BL_PIN
-#define WAVESHARE_RP2040_LCD_BL_PIN 25
+#ifndef WAVESHARE_LCD_BL_PIN
+#define WAVESHARE_LCD_BL_PIN 25
 #endif
 
 // --- FLASH ---